Electrical Testing - Page 750

Manufacturer: Extech Instruments Brand: Extech Model: MA410

Quickly check for the presence of live wires before testing Built-in non-contact voltage detector with LED alert. Compact size allows measurements in tight locations. 1.2 inch (30 mm) jaw size for conductors up to 500 MCM. Multimeter functions include AC/DC voltage, resistance, capacitance, frequency, temperature, duty cycle, diode, and continuity. Relative mode for capacitance zero, and offset adjustment. Data hold and min/max. Auto power off

Manufacturer: KKmoon Brand: KKmoon

UT18D can provide AC and DC voltage (including the three-phase alternating current) measurement, phase of three-phase AC power indicator, on-off test, RCD Test, single pen measurement (can determine the zero line or wire), self checking and other functions. Suitable for: smelting, electronics, manufacturing, defense, electric power, petroleum, chemical industry. More detailed product information, please refer to the English manual.Specifications: AC/DC voltage range: 12/24/50/120/230/400/690V Phase rotation test operating voltage: 100V~690V, frequency: 50Hz~ 60Hz Single lead (L2) voltage detection operating voltage: 100V~690V, frequency: 50Hz~ 400Hz Continuity Test: 0~100KΩ RCD test operating voltage: 230V(50Hz～400Hz) Power: 1.5V AAA Batteries * 2 (not included) LCD Size: 70 * 35 mm Product Color: Red and Grey Product Net Weight: 264g Product Size: 272mm * 85mm * 31mmPackage Information: Package Size: 35.4 * 17.4 * 4.8cm / 13.9 * 6.9 * 1.9in Package Weight: 408g / 14.39oz Blister PackagePackage List: 1 * UNI-T UT18D Voltage and Continuity Tester 1 * English Manual

Manufacturer: TinySine Brand: TinySine

TSIR04 is a USB relay with optically isolated inputs and OLED display and temperature sensor port. It allows computer control switching of external devices by using the USB port of your computer. The TSIR04 provides four volt free contact relay outputs with a current rating of up to 10Amp each. The module is powered from a 5V(12V) DC power supply. The DC input jack is 2.1mm with positive core polarity, The relays are SPDP types.

Manufacturer: KIZE Brand: KIZE

SG1005 series direct digital synthesis signal generator use DDS technology and FPGA design with the characters of high stability and low distortion ect., It's the ideal equipment of electronic engineer, laboratory, production lines, the teaching and scientific research. 1. Signal Output function Output waveforms:Sine wave, Square wave and Triangle wave Output amplitude:≥10Vp-p(signal output, no load) Output impedance:50ω±10%(signal output) DC offset:±2.5V(no load) Display:LCD160 Frequency range:0.01Hz ~ 5MHz(SG1005) Resolution:0.01Hz Frequency Stability:±1×10-6 Frequency accuracy:±5×10-6 Sine wave distortion:≤0.8% (reference frequency is 1kHz) Trinagle linearity:≥98% (0.01Hz~10kHz) Rise and fall time of square wave:≤100ns Square Wave Duty range:1%-99% 2.TTL Output function Frequency range:0.01Hz -5MHz(SG1005) Amplitude:>3Vp-p Fan Out:>20 TTL loads 3.COUNTER function Counter Range:0-4294967295 Frequency Meter Range:1Hz-60MHz Input Voltage Range:0.5Vp-p-20Vp-p 4.Others function Save and Load Parameter:0-9(0: default load) Package included: 1 x 5MHz DDS Function Signal Generator Source Module Wave 1 x 5V Power Supply

Manufacturer: Sparkfun Electronics Brand: Sparkfun Electronics Model: 06202KP

Description: This kit includes everything you need to build your very own, fully functional, digital oscilloscope. Once you've got it up and running, the oscilloscope features up to 5M samples/second, 8-bit resolution, up to 50Vpp max input voltage, and more!This kit includes a semi-populated PCB, with all of the surface mount components already soldered on for you. The components left for you to solder are all through-hole. This is on the higher end of difficulty as far as through-hole kits go.Features:9VDC power supply voltage

Manufacturer: China Brand: Aimometer ms2108a 4000 Counts Auto Range 400A AC&D Model: Aimometer ms2108a 4000 Counts Auto

Display: 4000 CountsJaw Opening: 26mm/1.0REL: Relative measurementProduct Size: 208mm78mm35mm/8.2"3.1"1.4"Quantity: 1 Pcs

Manufacturer: JYE Tech Brand: JYETech

It was designed on the base of DSO 062 kit and comprises many enhancements in hardware and firmware. Major improvements include: Higher sensitivity (10mV/div vs 100mV/div) Wider analog bandwidth (3MHz vs 1MHz) Larger capture buffer (1024 points vs 256 points) Variable trigger position (1% - 100%) with indicator Test signal generator with variable frequency and amplitude USB connection Upload of captured raw data as CSV file Work as USB scope (with jyeLab) and data logger (8 channels, 10-bit resolution) Higher sensitivity (0.2Vpp vs 3Vpp) in built-in frequecy meter Battery/USB powered (Battery not included. USB Cable not included) Fully enclosures Operations of DSO 068 are even easier thanks to silicone pushbuttons and rotary encoder. Parameter setting is simply, straightforward, and quick. Major Part: 1. Main circuit board with pre-soldered ICs and a few SMD parts. Board is pre-tested and MCUs on board are pre-programmed. 2. 128 X 64 graphic dot-matrix LCD module. 3. Step-up voltage converter board (JYE116). It boosts battery voltage to 5V from as low as 2V. 4. Voltage inverter board (JYE120). It generates -5V form +5V with current capacity up to 200mA. 5.On/Off switch board (JYE117). This is the power switch of instrument. [optional] 6. Li-ion battery charger board (JYE118). It includes the USB/Battery power switch circuit. [optional] 7. USB-Uart converter board (JYE119). This bridges the scope to USB host. [optional] 8. Professional 20MHz probe with selectable 1X/10X attenuation. 9.All through-hole components, mechanical parts, and accessaries. 10.Dimension: 140mm X 70mm X 30mm Weight: 120 gram

Manufacturer: Triplett Brand: Triplett Model: 87.953

TRIPLETT    Relay Output Board Part # : 87-953 Universal bargraph BD400 Relay Output Board 4 relay/setpoints (plug-in) NOS --New.Old Stock Quantity available: 4  Will combine items for reduced shipping costs.  Please check with me for actual shipping costs when combining more than one item, or multiple items.

Manufacturer: Pomona Electronics Brand: Pomona Model: AL-B-48-0 Color: Black

Hands free testing in controlled voltage environment: 150V; For CE compliance: not intended for hand held use at voltages above 33 Vrms/70 Vdc, 5A, +122ËšF (+50ËšC) max.

Manufacturer: SainSmart Brand: SainSmart Color: Black

Signal Output Function * Output waveforms: Sine wave, Square wave and Triangle wave * Output amplitude: ≥10Vp-p(signal output, no load) * Output impedance: 50Ω±10%(signal output) * DC offset: ±2.5V(no load) * Display: LCD160 * Frequency range: 0.01Hz ~ 8MHz(UDB1008) * Resolution: 0.01Hz * Frequency Stability: ±1×10-6 * Frequency accuracy: ±5×10-6 * Sine wave distortion: ≤0.8% (reference frequency is 1kHz) * Trinagle linearity: ≥98% (0.01Hz~10kHz) * Rise and fall time of square wave: ≤100ns * Square Wave Duty range: 1%~99% TTL Output Function * Frequency range: 0.01Hz ~ 8MHz(UDB1008) * Amplitude: >3Vp-p * Fan Out: >20 TTL loads COUNTER Function * Counter Range: 0-4294967295 * Frequency Meter Range: 1Hz~60MHz * Input Voltage Range: 0.5Vp-p~20Vp-p * Storage and transferred: 10 set of parameters with storage and recall functions. Package List: 1 * DDS signal generator 1 * DC 5V power adapter