Electrical Testing - Page 768

Manufacturer: GMW Associates Brand: GMW Associates

The CPCO Series (77mm) DC-AC Current Probes are Clamp On current sensors capable of measuring ac and dc currents available in ranges of +/-500A, +/-1000A, +/-2000, +/-4000A or +/-8000A with an accuracy of +/-1% and non-linearity of

Manufacturer: Keysight Technologies Brand: KEYSIGHT TECHNOLOGIES Model: N7022A

The N7022A main cable is a replacement cable for the Keysight N7020A oscilloscope power rail probe. It is designed to be flexible and durable while still providing high signal fidelity.

Manufacturer: Kyoritsu Brand: Kyoritsu Model: 2046R

The Kyoritsu 2046R digital clamp-meter is a true RMS sensing, auto-ranging multimeter for measuring current, voltage, capacitance, frequency, and resistance in electrical testing applications. It has a clamp that measures AC (alternating current) and DC (direct current) to 600A (amperes). The clamp has two jaws that can close around an electrical conductor up to 33mm (1.3 inches) in diameter to measure current without touching or interrupting the circuit. A set of test leads is included for measuring AC and DC voltage to 600V, capacitance to 4,000μF (microfarads), frequency to 10kHz (kilohertz), and resistance to 60MΩ (megohms). Frequency can also be measured with the clamp. The meter has a rotary switch to select the property to measure, and a 6,039-count LCD with a backlight for visibility in low light. The display shows the reading numerically and in a 60-segment bar graph.The meter's peak hold function captures the highest reading of the inrush current at the startup of motors and other inductive loads. Its relative function allows a measurement to be set as a reference value and displays subsequent measurements as a negative or positive deviation from that value. The minimum/maximum function tracks the lowest and highest readings for a property for as long as the function is engaged. To capture readings in tight spaces and aid documentation of readings, the data hold function keeps the most recent reading on the display after disconnecting from the circuit. An NCV (noncontact voltage) detector in the jaws senses voltage without making contact with the circuit and triggers a red LED when voltage exceeds 100V. A continuity buzzer confirms that the circuit conducts electricity, and a diode check detects whether a circuit’s diodes are working properly. When paired with a K-type thermocouple probe (sold separately), the meter's temperature function can display temperature readings in degrees C and degrees F. The unit operates on two 1.5V AAA batteries, and turns off automatically after 15 minutes of ...

Manufacturer: Shimpo Brand: Shimpo Model: RE1B-60F

Rotary Encoders available from 60 to 1000 PPR with 5000 rpm maximum capability. Quadrature versions available. RE Series Encoders are ideal for usage with Shimpo's Panel Mount Tachometers and Counters.

Manufacturer: KAAYEE Brand: KAAYEE Model: KYLA5016

Specification: Input channels number: 16 Max sampling rate: 500M Measurement bandwidth: 80M Min pulse width can be captured: 6.25ns Hardware memory size: 1Gbits Hardware sampling depth: 50M/channel Max compressed depth: 10G/channel Input voltage range: -50V ~ +50V Input impedance: 220K?, 12pF Adjustable threshold voltage: -4V ~ +4V, step: 0.01V PWM channels number: 2 PWM frequency range: 0.1 ~ 20MHz PWM frequency adjust step: 10ns PWM pulse width adjust step: 5ns PWM output voltage: +3.3V PWM output impedance: 50? Standby current: 200mA Max operating current: 400mA Support OS: Windows XP, Vista, Windows 7/8/10(32bit/64bit) Supported standard protocols: UART/RS-232/485, I2C, SPI, CAN, DMX512, HDMI CEC, I2S/PCM, JTAG, LIN, Manchester, Modbus, 1-Wire, UNI/O, SDIO, SMBus, USB1.1, PS/2, NEC InfraRed, Parallel, etc...

Manufacturer: UNI-T Brand: UTD2025CL

1、Dual analog channels width range 1mV/div~20V/div; 2、7 inches widescreen LCD displays; 3、Special Print Scree Feature; 4、Supports plug-and-play USB storage device. Communication with and remote control of computer through the USB device; 5、USB drive system software upgrade; 6、Storage of waveforms setups and interfaces waveforms and setups reproduction; 7、Automatic measurement of 28 waveform parameters; 8、Unique waveform recording and replay function; 9、Multilingual menu displays. Specification:UTD2025CL Channels:2 Bandwidth:25MHz Sample Rate:250Ms/s Rise Time:≤14ns Memory Depth:25kpts Waveform Acquisition Rate:≥2000wfms/s Vertical Sensitivity:1mV/div~20V/div Timebase Range:10ns/div~50s/div Storage:Setup,Wave,Bitmap Trigger Modes:Edge, Pluse, Video, Alternate Interface:USB OTG,Pass/Fail General Characteristic Power:100-240VAC, 40-440Hz Display:7 Inches 64K Color TFT LCD, 400×240 Product Color:White and Gray Product Net Weight:2.2 Kg Product Size (W×H×D):306mm ×147mm × 122mm Standard Accessories:Probe×2 (1×,10× switchable),Power Cord, USB Cable, PC Software CD

Manufacturer: BENETECH Brand: Benetech

Specification Model-GM3125 Rated Voltage: 500V / 1000V / 2500V / 5000V Testing Range: 500V: 0.0 ~ 999M; 1000V: 0.0 ~ 1.99G; 2500V: 0.0 ~ 99.9G; 5000V: 0.0 ~ 1000G Accuracy: ±5%rdg±5%dgt DC/AC Testing: 30~600V Resolution: 1.0V Overload Protection: AC 1200V/10 Withstand Voltage: AC8320V/5Seconds Insulation Resistance: 1000MΩ/DC1000V Short Circuit Current: 1.4mA Operation Voltage: 12V Power supply:8 * 1.5V LR14 Battery(not included) Notice:we have to take off the battery due to the policy of the shipping company Features: 1.protective function of voltage overload 2.Ergonomic design is comfortable to manipulate 3.LCD backlight display function 4. Auto power off function 5. Low battery indication is energy-saving Packaging Details: Proudct Size 153 * 96 * 220mm Proudct Weight 1108g Outer box Size (1pcs) 31*25.5*14cm Iner box weight(1pcs) 2.9kg Package List 1 x Insulation Resistance Tester 1 x English Manual

Manufacturer: VDO Brand: VDO Model: A2C53210973-K

VDO A2C53210973-K Ammeter - +/- 100 Amps with Shunt - Electronic - Viewline Onyx - Bezel not included

Manufacturer: VDO Brand: VDO Model: A2C53210956-K

VDO A2C53210956-K Ammeter - +/- 150 Amps with Shunt - Electronic - Viewline Ivory - Bezel not included

Manufacturer: Greenlee Brand: Greenlee Model: CM-1360

Includes Clamp Meter (2) 1.5V AA Batteries Test leads Carrying case Features Measures AC current AC voltage measurement with digital low pass filter for accurate readings on variable frequency drives Also measures DC voltage, resistance, capacitance and frequency Tests continuity and diodes Flashlight inside clamp jaw for easier work in dark locations Backlight increases accuracy on small wires and low current Two voltage detection modes noncontact or using a single test lead Data hold Recording of Maximum, Minimum and Average readings Lifetime Limited Warranty