Electrical Testing - Page 809

Manufacturer: Mueller Electric Brand: Mueller Electric

Test Clips Red Micro-Plgr Clip-

Manufacturer: Vetus Brand: ETCR

Technical Specification *Function AC leakage measurement, AC current measurement, On-line AC current measurement *Power Supply 6F22,9V *Process Type Clamp CT, Integral Approach *Display Type 4 Digits LCD *Clamp Size 25mm×30mm *Meter Dimension LWH: 175mm×70mm×38mm *LCD Dimension 35mm×21.5mm; Display Dimension: 32mm×15mm *Sampling Rate 2 Times/Second *Frequency 50Hz, 60Hz Automatic identification *Shifting Automatic Shift *Range :0.001mA～60.00A *Resolution: 1uA *Accuracy :±1.5%±5dgt (23℃±3℃, below 70%RH) *Line voltage : Below AC 600V *RS232 Interface: With RS232 interface, Data stored in the memory can be uploaded to the computer, with software monitoring *Data Memory : 99 sets, "FULL" Blinking when memory is full *Peak Maintaining Peak value capture hold function, press HOLD without Release to display peak value *Reading Hold Reading hold function: "DH" symbol display *Overflow display Range overflow function: "OL" symbol display *Automatic Shutdown :5 minutes after the boot *Battery Detection :When battery voltage is lower than 7.2V, low battery symbol will shown to remind battery replacement. *Rated Power : 5mW *Working Temperature and Humidity: 0℃~40℃; below 80%rh *Storage Temperature and Humidity :-10℃~60℃; below 70%rh *Insulation Strength :AC2kV/rms (between core and box) *Safety Provisions: IEC1010-1, IEC1010-2-032, Pollution level 2, CAT Ⅲ(600V) *Accessories Meter: 1 piece, RS232 Com-cable:1 piece; Software Disk: 1 piece;

Manufacturer: Hioki Brand: Hioki Model: 9650

Clamp on sensor for the micro hicorder 8205-10/8206-10. Sensor is designed with a safety barrier to protect the user from being in direct contact with live conductors. Completely meet all CE marking requirements. Rated input current 100 A AC. Rated output current 100 mA AC. Accuracy (at 50/60 Hz) amplitude: +/-1.5 percent rdg. +/-0.03 Percent f.s. Full scale (f.s.) is the rated input current value. Frequency characteristics 40 Hz to 1 kHz (+/-8 percent or less). Maximum allowable input continuous 130 A rms (45 to 66 Hz). Maximum circuit voltage 300 V AC rms (insulated wire). Core jaw diameter: 37/64". Measures 1-51/64" width by 5-19/64" height by 53/64" depth. Cord length: 9-53/64'.

Brand: Diamond Model: SX400

Manufacturer: B&K Precision Brand: B&K Precision

All purpose demodulator probe, usable with most oscilloscopes. Features light weight design and 48" (1.2m) coaxial cable.100KHz to 950MHz Bandwidth +3dB Accuracy 200V Max input voltage 50VeffHF Voltage 250mV Actuating voltage 5pF Input capacitance Cable Length: 1.2 meters

Manufacturer: B&K Precision Corporation Brand: B&K Precision Model: LC 2650

Leather textured carrying case with strap. Carry and protect model 2650

Manufacturer: Made in usa Brand: SPIRAX SARCO

NEW OLD STOCK IN DIRTY BOX (YD1-2-2) FREE! Sellers: Add a FREE map to your listings. FREE!Exported By ExportYourStore

Manufacturer: Probe Master Brand: Probe Master Model: 5905-1

Passive Voltage Probe, 500MHz, 10X, 600V, 3.5ft

Manufacturer: Amprobe Brand: Amprobe Model: ACDC-400 Color: Multicolored

The Amprobe ACDC-400 TRMS digital clamp meter is a true RMS (root mean square) sensing, auto- or manual-ranging multimeter for measuring current, voltage, and resistance in electrical testing applications. It has a clamp that measures alternating current (AC) and direct current (DC) to 400 amp. The meter comes with detachable test leads that measure AC voltage and DC voltage to 600 volts (V), and resistance to 40 megaohms. The clamp has two jaws that can close around a conductor up to 1.1" (27 mm) in diameter to measure current or frequency without touching or interrupting the circuit. The relative zero mode stores a reading in memory to use as a zero point for subsequent readings, allowing quick comparison of multiple readings. The maximum or minimum reading mode displays the highest or lowest reading in a session to track a sudden increase or decrease in readings. It has a liquid crystal display (LCD) that shows readings both in digits and on a bar graph. The LCD is backlit for visibility in low light. An audible continuity sensor confirms that the circuit conducts electricity. The hold function keeps the reading on the display, even after the meter is disconnected. The unit automatically turns off after 30 minutes of non-use to conserve battery life, and a low-battery indicator signals when the meter's batteries need to be replaced. A finger guard on the body of the meter helps protect fingers from shock. This true RMS (root mean square) sensing meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has a sinusoidal waveform, or non-linear loads, such as electronic devices or motors, where the current or voltage has a sinusoidal non-sinusoidal waveform. Two ranging modes (auto or manual) offer a range of operator control when taking readings. When turned on, the meter will be in auto-ranging mode and automatically selects select the correct operating range for the property being measured. It can be switched to manua...

Manufacturer: Tenmars Brand: Tenmars

Features -Uses 3 internal orthogonal sensors to test a wide range of ELF magnetic fields, independent of measurement angle -The tester is designed to provide user a quick, reliable and easy way to measure magnetic field radiation levels around power lines, home appliances and industrial devices -The tester is a cost-effective hand-held instrument that was designed and calibrated to measure magnetic field radiation at different bandwidths from 30Hz to 2000Hz -Display micro Tesla (?T) or milli Gauss (mG) units -Data hold (HOLD), maximum hold (MAX) and minimum hold (MIN) functions -Auto range or Manual range select mode -Data logging capacity with memory size: 500 data sets -Time and Calendar function -Low battery indication -Over load display ("OL") -Auto power off function -Made in Taiwan Specifications -Display: 4 digits Triple LCD Display, maximum reading 9999 -Range: 20/200/2000 mG, 2/20/200 ?T -Resolution: 0.01/0.1/1 mG or 0.001/0.01/0.1 ?T -Frequency response: 30 Hz ~ 2000Hz -Sensor: Triple Axis (X, Y, Z) -Accuracy: 20 mG ¡Ó(3.0% + 30 digits) at 50Hz/60Hz or 3.0?T ¡Ó(3.0% + 30 digits) at 50Hz/60Hz -Overload: LCD display "OL" -Sample rate: 2.5 times per second -Battery: 1 x 9V Battery (not included) -Battery Life: approx. 100 hours -Operating Temperature: 5 ~ 40 ¢XC (41 ~ 104 ¢XF) -Operating Humidity: < 80% R.H. -Storage Temperature: -10 ~ 60 ¢XC (14 ~ 140 ¢XF) -Storage Humidity: < 70% R.H. -Dimension: approx. 173 (L) x 80 (W) x 32 (D) mm (6.81 x 3.15 x 1.26 inch) -Weight: approx. 230 g (8.11 oz) One Set Included -1 x EMF Tri-Axis Tester -1 x Carrying Bag -1 x Instruction Manual -Standard Factory Package