Electrical Testing - Page 821

Manufacturer: Johnson / Emerson Connectivity Solutions Brand: Johnson / Emerson Connectivity Solutions

Test Plugs & Test Jacks TEST JACK BLUE

Manufacturer: Hioki Brand: Hioki

Hioki CT9691-90 100A AC/DC Clamp Sensor with Power Supply Hioki AC/DC clamp sensors are best-in-class current sensors for use with power meters, Memory HiCorders and high performance oscilloscopes. The CT9691 and CT9691-90 with sensor unit attachment is a DC to 10kHz/100A sensor, ideal for capturing current signals from solar power generation systems, UPS and batteries. Note: To use the CT9691/ CT9692/ CT9693 sensor with the Hioki PW3198 Power Quality Analyzer or the Hioki Memory HiCorder series, it must be connected and powered via the Sensor Unit CT6590. Note: The CT9691/ CT9692/ CT9693 sensor may also be used with the Clamp on AC/DC HiTester 3290/ 3290-10 (without the Sensor Unit CT6590). Parts Name

Manufacturer: Accuenergy Brand: Acuvim II Model: Acuvim-II-D-60-5A-P1 Color: LCD Display

Versatile & intelligent multifunction power and energy meter with 0.2% accuracy, built-in Modbus& DNP3.0 communication, LCD display, and easy snap-on modular design including various communication such as ethernet and I/O control. It is ideal for monitoring and controlling of power distribution systems with low cost. All monitored data is available via a standard RS485 communication port running the standard Modbus-RTU, DNP3.0, Ethernet (Modbus-TCP/IP) ,Profibus and BACnet. Acuvim II is supported by free Acuview PC software which enables for remote control, monitoring and datalogging of the device. The Acuvim II is UL and CE approved, and comes with a class-leading 5 year warranty.

Manufacturer: Instek Brand: GW Instek Model: USG-LF44

Instek USG-LF44 35MHz to 4400MHz RF Signal Generator GW Instek debuts the brand new USG-Series RF signal generator, which comes with five models to meet users' requirements and is a pocket-sized, and USB interface compatible RF signal generator with the frequency range from 35MHz to 4400MHz. The USG-Series provides continuous wave (CW) signal outputs without any signal modulation function. The built-in electronic attenuator of the USG-Series allows an adjustable power range from -30dBm to 0dBm. The USG-Series has several operational modes including fixed frequency, frequency sweep, frequency hopping, and power sweep. The USB-Series RF signal generator, with the frequency bandwidth limitation, provides lower harmonic output performance.   Test Result of Similataneous Power Sweep and Frequency Sweep   The GW Instek USG-Series RF signal generator is a pocket-sized and USB interface compatible RF signal generator. It covers the frequency range from 35MHz ~ 4400MHz. The USG-Series provides continuous wave (CW) signal outputs without any signal modulation function. The built-in electronic attenuator of the USG-Series allows an adjustable power range between -30dBm to 0dBm. The USG-Series has several operational modes including fixed frequency, frequency sweep, frequency hopping, and power sweep.   Easy to Use Graphical Interface with Numeric Setting   A USG CD-ROM provides dedicated PC application programs, which were developed under JAVA software structure. This USG PC application program supports operating systems such as Windows 2000/XP/Vista/7/8, Linux & Mac OS X through the USB interface.   USG Android APP   Users can download USG APP to smart phone or tablet (or smart phone) and USG. The Android APP application software for the USG signal generator is available on Google Play Store

Manufacturer: Radiall Brand: Radiall

Test Leads BAN4 BDM/BDM P-CORD 200CM RED

Manufacturer: Zhangzhou Eastern Intelligent Meter Co. LTD Brand: all-sun Model: EM1230 Color: Blue

Your Wise Choice --- all-sun EM1230 Handheld Digital Oscilloscope EM1230 Handheld Digital Oscilloscope is a 25MHz digital storage oscilloscope, 6,000-count True RMS Digital Multimeter functions integrated multifunctional handheld instrument, ideal for field use. The main function. 2-channel, 25MHz digital storage oscilloscope True 6000 words RMS digital multimeter Features. 100MSa / s real-time sampling rate, 25MHz real-time bandwidth Automatic tracking measurement: automatic tracking based on external input signal to adjust the vertical amplitude \ horizontal time base and trigger stalls, without human intervention. Large dynamic measurement range: no extended probe leads directly measure range from 10mV/div to 500V/div Screen can display 4 measurement parameters. The user can choose RMS, peak, average, frequency, period .etc in more than 10 kinds of parameters as needed. Two kinds of cursor measurement mode selection. 320 * 240 dot TFT LCD Built-in battery, AC and DC Power adapter Recorder --- continuous track record up to 24 hours of event Standard USB interface, easily communicate with a computer for data analysis and test results archive through the PC software. Technical Specifications. See Display Pictures Package Checklist. Oscilloscope x1; 3.7V lithium battery x1; AC/DC Power Adapter x1; Oscilloscope Probes x 2; Multimeter Test Leads 2 (red, black); USB Cable x1; User Manual x1. PLEASE NOTE: Contact customer service: [email protected] if you have any questions or after-sale problem.

Manufacturer: Fluke Corporation Brand: Fluke Model: 4637355

Fluke 24 inch iFlex flexible current probes expand the measurement range to 3000A AC while providing the ultimate measurement flexibility. The iFlex probes connect directly to the energy logger, displaying current measurements without error prone scaling factors. The 1.8 m (6 ft.) cord allows separation between the measurement location and the energy logger making it easier to view the display.

Manufacturer: Tektronix Brand: Tektronix Model: DPO2COMP

Computer Serial Triggering and Analysis Module. Enables triggering on packet-level information on RS- /UART buses as well as analytical tools such as digital views of the signal, bus views, packet decoding, search tools, and packet decode tables with time stamp information.

Manufacturer: Cal Test Electronics Brand: Cal Test Electronics Model: CT3685

DSO active differential probe with 100x attenuation and voltage measurements up to +/-700V. Bandwidth to 50 MHz. Powered by 9V DC mains adapter. Applications include: precise power semiconductor device measurements, switching power supply design, precise measurement of power converters, precise measurement of motor derived. Features: Up to +/-700V differential. 50 MHz bandwidth (-3 dB). High accuracy +/-1 percent. Safety certified. Small size. Good CMRR. Accessories: Spring loaded hook probes, 9V DC adapter, manual. Reference SI-50. Bandwidth: 50 MHz. Attenuation(s): 100x. Accuracy: +/-1 percent. Rise Time: 7 ns. Input Impedance: 4 Mohm/7 pF. Input Voltage: Differential Voltage (DC+Peak AC): +/-700V or 600 Vrms. Common-Mode Voltage (DC+Peak AC): +/-1400V or 600 Vrms. Absolute Max. Voltage (DC+Peak AC): +/-1400V or 600 Vrms CAT II. Output Voltage: Swing: +/-7V (into 50 kohm load). Offset (Type): +/-1 mV. Noise (Type): 0.3 mVrms. Source Impedance (Type): 50 kohm. CMRR (Type): -90 dB at 60 Hz; -60 dB at 1 MHz. Operating Temperature/Humidity: -10 to +40 degree C / 25 to 85 percent RH. Storage temperature/humidity: -30 to +70 degree C / 25 to 85 percent RH. 125cm Cable length. 50cm Input leads length. 2002/95/EC RoHS compliant. Measures: 111mm length by 22mm width by 14mm height.

Manufacturer: Cal Test Electronics Brand: Cal Test Electronics Model: CT3684

DSO active differential probe with 10x attenuation and voltage measurements up to +/-70 V. Bandwidth to 50 MHz. Powered by 9V DC mains adapter. Applications include: precise power semiconductor device measurements, switching power supply design, precise measurement of power converters, precise measurement of motor derived. Features: Up to +/-70 V differential. 50 MHz bandwidth (-3 dB). High accuracy +/-1 percent. Safety certified. Small size. Good CMRR. Accessories: Spring loaded hook probes, 9V DC adapter, manual. Reference SI-50. Bandwidth: 50 MHz. Attenuation(s): 10x. Accuracy: +/-1 percent. Rise Time: 7 ns. Input Impedance: 1.6 Mohm/7 pF. Input Voltage: Differential Voltage (DC+Peak AC): +/-70V or 70 Vrms. Common-Mode Voltage (DC+Peak AC): +/-700V or 600 Vrms. Absolute Max. Voltage (DC+Peak AC): +/-700V or 600 Vrms CAT II. Output Voltage: Swing: +/-7V (into 50 kohm load). Offset (Type): +/-2 mV. Noise (Type): 0.7 mVrms. Source Impedance (Type): 50 kohm. CMRR (Type): -95 dB at 60 Hz; -60 dB at 1 MHz. Operating Temperature/Humidity: -10 to +40 degree C / 25 to 85 percent RH. Storage temperature/humidity: -30 to +70 degree C / 25 to 85 percent RH. 125cm Cable length. 50cm Input leads length. 2002/95/EC RoHS compliant. Measures: 111mm length by 22mm width by 14mm height.