Electrical Testing - Page 826

Manufacturer: T&O Brand: Toto

DIR: Setting the coordinate direction Linear and non-linear error compensation. Self-diagnostic function for calculation error. Instant power failure memory. RS232 output. Power consumption: DC 8V~30V, 0.8A. Resolution selection: 0.0001, 0.0002, 0.0005, 0.001, 0.002, 0.005, 0.01, 0.02, 0.05, 0.1, 0.2, 0.5, 1.5, 10mm. Linear Glass Scales: Resolution: 0.005mm. Accuracy: ±(5+5L/1000) µm. Maximum response speed: 47 in/sec. Includes: All mounting hardware is provided. 2-Axis Packages: (1) Standard DRO counter. (2) Linear glass scales.

Manufacturer: Neptune Brand: Neptune

Neptune ET4AR7G8S1573 Residential Turbine Meter T-10,Size: 2" Pro-Read Pit/6-Wheel W/O Receptacle

Manufacturer: B&K PRECISION Brand: B&K Precision Model: 4054

Price for: Each 1 . Bandwidth: 25MHz. Bandwidth: 25MHz. External Depth: 281mm. External Height: 89mm. External Height: 89mm. External Width: 213mm. Modulation Type: AM / BPSK / FM / FSK / PM / PWM. Modulation Type: AM / BPSK / FM /. Plug Type: -. Plug Type: -. SVHC: No SVHC (20-Jun-2013). Signal Generator Type: Arbitrary, Function, Pulse. Signal Generator Type: Arbitrary, Function, Pu. Supply Voltage Range: 100VAC to 240VAC. Supply Voltage Range: 100VAC to 240VAC

Manufacturer: Dranetz Brand: Dranetz Model: DRANFLEX3000XLB48

Flexible Probes are available in three lengths 24 inches, 36 inches, and 48 inch lengths and available in two maximum ranges of 3000 A RMS and 6000 A RMS. Each probe can be powered by battery or AC adapter and multiple probes can be powered by a single AC adapter. Flex probes are available as separate probes, or as four phase packages, which include power supply. All Flexible Probes listed here are compatible with Dranetz portable instruments: PowerXplorer, PowerGuide, PowerVisa, PowerGuia, Energy Platform, PP4300, 658 with CA4300 adapter; and Dranetz permanent instruments: Encore 61000 with 61MAC module, Signature System 5513. Adapters are available for use with other instrument configurations; contact us for details. Dranetz recommends only Dranetz-brand probes be used with Dranetz power quality equipment

Manufacturer: Megger Brand: Megger Model: 1001-369

The Megger MIT400 series telecom and CATV digital/analog insulation tester is an insulation resistance meter with built-in voltmeter for measuring insulation resistance, voltage, and continuity in telecom and CATV installations. The autoranging digital meter includes true root mean square (TRMS) and direct current (DC) voltage measurement. The dual LCD screen indicates test results either digitally or with an analog arc function to replicate the response of analog meters. The unit has a voltage detection test inhibit feature to prevent testing when a circuit has a voltage of greater than 75V. The tester is safety rated to European Standard EN61010-1, Category IV, 600V and is also Ingress Protection 54 (IP54)-rated for protection against dust and splashing water. The Megger MIT400 series is commonly used by cable installers and maintenance workers.Specifications Automatic continuity testing range 0.01 to 100 Ohms (0-50 Ohms on analog range) Voltage testing range 0 to 600V DC or TRMS Voltage test inhibit level 75V Power supply 5 AA alkaline or rechargeable batteries Weight 590g / 20.73oz. Safety standard met International Electrotechnical Commission (IEC)/European Standards (EN) 61010-1 Cat IV 600V Mechanical standard met IP54, for protection from dust and splashing water Dimensions 220 x 92 x 50mm / 8.66 x 3.63 x 1.97 inchesH is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Electrical test meters report electrical circuit properties, such as voltage, resistance, capacitance, and continuity. Available in handheld or benchtop form, they detect electrical problems in equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the meter to a circuit or device. Single-function meters, such as battery testers and voltage testers, measure one property of a circuit, and multimeters measure multiple properties. Electrical test meters displa...

Manufacturer: Agilent Technologies Brand: Agilent Technologies

Agilent LiChrospher 100Diol 5um 250x4mm CrtdgCol - BC

Manufacturer: Megger Brand: Megger Model: DET3TC

The Megger DET3 digital ground resistance meter measures ground resistance, voltage, and current for digital ground and bond testing to increase the safety and performance of electrical systems. The unit measures digitally, is autoranging, and has user-selectable 25 or 50V test voltages. The noise rejection feature filters out noise up to 40V peak to peak for more accurate testing in high-noise environments. The meter measures voltage from 0 to 100V, ground current from 0.5mA to 19.9A, and ground resistance from 0.01 to 2000 ohms. The LCD display indicates test results and the status of the batteries for ease of use. The tester is safety rated to European Standards (IEC/EN) 61010-1, Category IV 100V. It is also Ingress Protection 54 (IP54)-rated for protection against dust and splashing water. The DET3 is commonly used by electricians and electrical contractors to help ensure the safety of electrical systems. Specifications Power supply (8) AA batteries Voltage range 0 to 100V Ground current range 0.5mA to 19.9A Ground resistance range 0.01 to 2000 ohms Weight (including batteries) 1kg/2.2 lb. Safety standards met International Electrotechnical Commission (IEC)/European Standards (EN) 61010-1 Cat IV 100V Ingress protection (IP) standard met IP54, for protection against dust and splashing water Dimensions 203 x 148 x 78mm/8 x 5.7 x 3.2 inches (H x W x D)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Electrical test meters report electrical circuit properties, such as voltage, resistance, capacitance, and continuity. Available in handheld or benchtop form, they detect electrical problems in equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the meter to a circuit or device. Single-function meters, such as battery testers and voltage testers, measure one property of a circuit, and multimeters measure multiple properties...

Manufacturer: Agilent Technologies Brand: Agilent Technologies

Agilent Eclipse XDB-C18 Crt 4.6x30mm 1.8um 3PK - BC

Manufacturer: Tasco Brand: Tasco

Features Set includes carry case, up to 42 clamps and all accessories. Easy to use with no knobs of switches to adjust. Determines which breakers are serving specific branches in seconds. Identifies lines on any electrical wiring system. Eliminates equipment downtime because circuits can be tested with or without power. Saves valuable time and only requires one operator. Microprocessor based digital signal for utmost accuracy Locates up to 42 branches concurrently Made in U.S.A. 2 Year Warranty Download Manual The Circuit Mapper System The Circuit Mapper is the first device of its kind that maps branch circuits of wiring systems concurrently with a single transmitter and receiver. Traditional methods of identifying circuit breakers and wiring are inefficient and expensive, often requiring two people to perform. With sensitive electronic equipment, simply turning breakers off and on is no longer a viable option. Even modern circuit tracers typically trace only one branch circuit at a time. The Circuit Mapper transmitter connects to lines at the panel rather than at the end of the branch circuit. The receiver displays the corresponding circuit number through digital signal processing, with or without direct electrical contact, so you know exactly which breaker is connected to each transmitter lead. There is no time wasted comparing signals or looking for the strongest signal. Using the Circuit Mapper system will greatly reduce man-hours spent when locating branch connections of electrical circuits. How It Works Each of the clamps connected from the transmitter around a conductive circuit induce a coded signal modulated at 166KHz. There is a unique code for each of the branch circuits. The receiver is able to measure the sinal on a conductor when the probe is inserted to the outlet.

Manufacturer: Megger Brand: Megger Model: 6410-865

The Megger 212000 series insulation resistance tester measures insulation resistance and voltage in electrical installations, building maintenance, and electrical testing. The average-sensing meter help provide accurate readings when measuring linear loads, where the current or voltage has a sinusoidal waveform. This analog meter has manual range selection for flexibility of use and a guard terminal to eliminate surface current leakage. Selectable test currents allow use in a variety of applications. The tester is safety rated to European Standard EN61010-1, Category II, 300V and Category I, 600V. The Megger 212000 series is commonly used by electricians and electrical contractors.Specifications Voltage testing range 0 to 600V DC or TRMS Voltage test inhibit level 75V Weight 1kg / 2.3 lb. Safety standard met International Electrotechnical Commission (IEC)/European Standards (EN) 61010-1 Cat II 300V, Cat I 600V Dimensions 130 x 125 x 180mm / 5.1 x 4.9 x 7 inchesH is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Electrical test meters report electrical circuit properties, such as voltage, resistance, capacitance, and continuity. Available in handheld or benchtop form, they detect electrical problems in equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the meter to a circuit or device. Single-function meters, such as battery testers and voltage testers, measure one property of a circuit, and multimeters measure multiple properties. Electrical test meters display information either in analog form using a needle that moves on a calibrated scale, or in digital form using digits or a graphic representation on an LED screen. Meters have electrical properties that are to be measured and the anticipated range of results, and should have a rating that is higher than the maximum value of the anticipated range. An electrical test meter has...