Electrical Testing - Page 843

Manufacturer: FLIR Systems Brand: Extech Model: MG300

View larger CAT IV Insulation Tester/MultiMeterwith Wireless PC Interface The MG300 is a True RMS multimeter with built-in insulation resistance tester with the added safety of wireless data streaming for remote monitoring and datalogging. By adding insulation testing capabilities to the ubiquitous digital multimeter, electricians are always equipped for insulation testing, helping to make it a more routine part of predictive maintenance with faster troubleshooting and repairs without additional tools. Features Overview The rugged and waterproof (IP67-rated) combination meter includes a digital insulation resistance tester (or megohmmeter) with 4 different test voltages for measuring resistance up to 4 GΩ with 0.001MΩ resolution. The full-function, true RMS digital multimeter includes useful extras like duty cycle measurements and milliamp readings for analog 4-20mA current loops in industrial analog process controls. The CAT IV-rated meter’s wireless data streaming enables safer troubleshooting and maintenance on dangerous moving equipment and one-person operation of remote safety switches. Technicians can focus on finding problems by monitoring real-time readings on a laptop or computer screen from safe distances – up to 30 feet away. Includes The MG300 comes with remote USB receiver, Windows compatible software, test leads with alligator clips, Type K bead wire temperature probe with adapter, carrying case, 6 AA batteries, and user manual. The MG300 is available with NIST-traceable certification (model MG300-NIST). For users outside North America, the MG302 which transmits data at 433MHz instead of 915MHz is also available. View larger Key Features AC/DC Voltage AC/DC Current Resistance Capacitance Frequency(electrical & electronic) Duty Cycle Diode Test Insulation Resistance Continuity Thermocouple Temperature

Manufacturer: Siglent Brand: Siglent

Features: ●200MHz Bandwidth 500MSa/s sample rate ●7''TFT-LCD display,8*18 grids ●Channels: 2CH+1EXT ●500MSa/s samplinge rate, 32Kpts memory depth ●6 digits hardware frequency counter, real time counting display ●Support SCPI programming command control ●Interface: USB Device, USB Host, RS-232, Pass/Fail ●Unique digital filter and data recorder function ●Embedded 12 languages, online help, one key storing and one key printing Application: 1. Electronic circuit design and debugging 2. Electrical circuit function test 3. Inspect instantaneous signal 4. Industrial control and measuring 5. Products quality control 6. Education and training Specifications: ●Model:SDS1202DL ●Bandwidth:200MHz ●Channels:2CH+1EXT ●Real time sampling rate:500MSa/s ●Equivalent sampling rate:50GSa/s ●Memory depth:32k ●Rise time:< 1.8ns ●Input impedance:1MΩ‖17pF ●Time base range:2.5ns/div-50s/div;Scan: 100ms-50s/div ●Vertical sensitivity:2mV-10V/div ●Vertical resolution:8bit ●Trigger source:CH1,CH2, Ext, Ext/5, AC Line ●Trigger types:Edge, Pulse, Video, Slope, Alternative ●Math Operation:+, -, ×, ÷, FFT ●Digital filter:High pass, Low pass, Band pass, Band Stop ●Max input voltage:±400V (DC+AC Pk-Pk), CAT 1, CATII ●Internal storage:2 groups of reference waveform, 20 groups of settings, 10 groups of waveforms ●External storage:Bitmap save, CSV save, Waveform save, Setting save ●Language:English,French,German,Russian, Spanish,Simplified Chinese,Traditional Chinese, Portuguese,Japanese,Korean,Italian,Arabic

Manufacturer: AEMC Brand: AEMC Model: 8220

The AEMC 8220 single-phase multimeter (also known as a multitester) measures electrical parameters and distribution network parameters including voltage, current, power, and harmonics; and monitors parameters of operating machinery including temperature, inrush current and duration of operation, distance of windings, and rotational speed. It is designed for use by technicians, control and maintenance engineers, electrical contractors, and educators. A continuity test confirms a circuit conducts electricity, and a diode test detects correct functioning of a circuit's diodes. Measurements include kW, kVAR, PF, DPF, kWh, KVARh, kVAh, and VA. The meter displays crest factor, peak, K-factor, and minimum, maximum, and average volts and amps. It calculates and displays watts, VAR and VA, power factor (PF), and displacement power factor (DPF) for single-phase and balanced three-phase systems. The meter can store up to nine sets of reading totaling up to 99 snapshots for volts, amps, power, and harmonics. Data can be transferred to a computer using the optical USB port and the DataView software (included). This true RMS (root mean square) meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has an undistorted waveform, or nonlinear loads, such as electronic devices or motors, where the current or voltage has a distorted waveform. The meter has auto- and manual-ranging modes. In auto-ranging mode the meter automatically selects the correct operating range for the property being measured. The three-line backlit color LCD has adjustable brightness and contrast for use in a variety of lighting levels. The meter meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for Category III installations up to 600V, which covers items used with enclosed building circuit installations (such as service panel parts, branch circuits, and fixed installations that are connected directly to a building's AC po...

Manufacturer: Fluke Corporation Brand: Fluke Model: 2648355

Fluke IR smart battery charger for thermal imagers.

Manufacturer: Amprobe Brand: Amprobe Model: 4416052

The Amprobe AT-4001-A advanced wire tracer is a circuit tracer used to locate and trace energized and non-energized wires, breakers, neutrals, and grounds to identify shorts, ground faults, and broken wires. The unit includes a universal transmitter that automatically switches to work with energized or non-energized systems. The transmitter can be manually set to low, medium, or high sensitivity for use on a variety of different circuit types. The unit comes with a soft carrying case to protect the instrument. The tracer is compatible with 9 to 300V alternating current (AC) or direct current (DC) circuits and has an operating frequency of 32.786kHz. The receiver is not position sensitive, so it does not need to be rotated to provide accurate readings. The receiver indicates the location of a wire with a series of ten LEDs and the transmitter indicates results on an LCD display. The transmitter and the receiver are each powered by one 9V battery. The AT-4001-A is designed for use by electricians and electrical contractors. Specifications Power supply for transmitter: (1) 9V battery (included) Power supply for receiver12/30/201312/30/2013: (1) 9V battery (included) AC/DC voltage range: 9 to 300V Amprobe manufactures electrical testing equipment for commercial, industrial, and home use. The company was founded in 1948 and is headquartered in Everett, WA. What’s in the Box? AT-4001-A Advanced Wire Tracer (1) T-4000-A Transmitter (1) R-4000 CON Receiver (1) C2901 110V Pigtail-banana plug cord set (1) C2902 Alligator clips-banana plug cord set (1) MTL-G 25 ft. grounding test lead (1) VRC-320 Alligator clip for ground lead (1) SV-1000 Soft carrying case (1) 9V battery Instructions

Manufacturer: Electro-Technic Products Brand: Electro-Technic Products

Model Introduction: Generates a spark at a high voltage and frequency, used to detect pinholes and vacuum leaks, and in the classroom to light spectrum tubes and florescent bulbs. It is lightweight, self-contained hand held. For light duty, intermittent use. Not to be operated for more than 10 minutes at a time, with a cool down period to follow. Key Features and Operating Characteristics: It is made of durable plastic, with an 8 ft. cord. It has a control knob on the high voltage handle to adjust the output voltage. The electrode used provides safety by using a spacer to isolate power line voltage in the event of a internal short-circuit with the device. Output voltage is adjustable from 20,000 to 50,000 Output frequency is 500 kHz. Output current is approximately 0.1 mA maximum. Separate models operate from either 115 or 230 VAC, 50/60 Hz. Overall dimensions: 11x2.5 without electrode.

Manufacturer: Fluke Corporation Brand: Fluke Model: FOM

Plug the fluke FOM fiber optic power meter into your digital multimeter to make testing in tight spaces easier. The fluke fiber optic meter (FOM) helps you test and maintain fiber optic cable without having to buy a whole new meter. Plug the FOM directly into any DMM with a mV dc function and a 10 MO input impedance and quickly and accurately verify fiber optic cable system loss. Light sources and patch cords sold separately. A variety of light sources and patch cords let you get just what you need for testing different cable types and lengths. Highly accurate readings mean less work, less repeated testing. Input connector: fixed ST. 16 hours minimum battery life with 9V alkaline battery. LED low battery indicator. 0 to 40 degree C operating temperature. -20 to 70 degree C storage temperature.

Manufacturer: B&K Precision Corporation Brand: B&K Precision Model: 310

The model 310 Digital Milli-Ohm Meter is used to ensure continuity and integrity of a wire, cable, conduit or any electrical connection. The 310 has a display resolution of 100 micro-ohms and has a professional four wire Kelvin test lead set included to ensure accurate readings. The heavy duty case has a rubber seal to make the unit water resistant and a convenient shoulder strap.

Manufacturer: Extech Instruments Brand: Extech Model: MG300-ETK

Electrical Troubleshooting Kit Kit includes 3 compact tools that are indispensable at a customer site for electrical installation, troubleshooting, and repair: MG300 13 Function, Wireless, True RMS Multimeter/Insulation Tester with 1000V test voltage and 4000MΩ range; 42509 12:1 Infrared Thermometer with high/low alarm and fast 2-color display for processes that require temperature control and monitoring and MA430T 400A True RMS AC Clamp Meter with built-in non-contact voltage detector and ideal for noisy or non-sinusoidal AC measurement. 42509 Versatile Alerts Boost Productivity The rugged and waterproof (IP67-rated) combination meter includes a digital insulation resistance tester (or megohmmeter) with 4 different test voltages for measuring resistance up to 4 GΩ with 0.001MΩ resolution. The full-function, true RMS digital multimeter includes useful extras, like duty cycle measurements and milliamp readings for analog 4-20mA current loops in industrial analog process controls. The MG300 also has built-in wireless data recording for safer troubleshooting and maintenance on moving equipment, one-person operation of remote safety switches, and the ability to monitor real-time readings on a laptop or computer screen from safe distances – up to 30 feet away – to detect intermittent anomalies. 42509 Versatile Alerts Boost Productivity This fast-responding (150 ms) IR thermometer uses an innovative alert system: an audible alarm is complemented by an illuminated display that changes from blue for normal conditions to bright red for alarm conditions. This color-coded alert function enables users to scan areas and focus on identifying anomalies without stopping to constantly evaluate specific temperature readings. MG300 Insulation Tester/Multimeter with Wireless PC Interface The MG300 is a True RMS multimeter with built-in insulation resistance tester with the added safety of wireless data streaming for remote monitoring and datalogging. By adding insulation testing capabilities to this CAT...

Manufacturer: Extech Instruments Brand: Extech Model: MG300-MTK

Motor & Drive Troubleshooting Kit This kit contains three compact tools that are indispensable at a customer site for installing and troubleshooting 3-phase motors and drives. Supplied in a storage case, this kit includes the MG300 13 Function, Wireless, True RMS Multimeter/Insulation Tester with 1000-volt test voltage and 4000 MΩ range; 480403 Motor Rotation and 3-Phase Tester, which checks phase sequence and indicates rotation direction of the motor; and MA430T 400A True RMS AC Clamp Meter with built-in non-contact voltage detector, which is ideal for noisy or non-sinusoidal AC measurement. MG300 Features Overview The MG300 is a True RMS multimeter that incorporates a digital insulation resistance tester (or megohmmeter) with four different test voltages for measuring resistance up to 4 GΩ with 0.001 MΩ resolution, and duty cycle measurements and milliamp readings for analog 4-20 mA current loops in industrial analog process controls. The MG300 also has built-in wireless data recording for safer troubleshooting and maintenance on moving equipment, one-person operation of remote safety switches, and the ability to monitor real-time readings on a laptop or computer screen from safe distances — up to 30 feet away — to detect intermittent anomalies. 480403 Features Overview This Phase Sequence and Motor Rotation Tester has a 40 to 600 volt rated range for testing the phase orientation of 3-phase power sources over a 2 to 400 Hz frequency range. The LEDs indicate phase orientation — clockwise or counter-clockwise — and whether each of the phases is live. Also, the 480403 indicates rotation direction of the motor to ensure that it doesn't get damaged from incorrect wiring. The meter comes complete with cable and three large color coded alligator clips, pouch case, and 9-volt battery. MA430T Features Overview The MA430T is a compact 400 amp AC clamp meter that enables users to take measurements in tight spaces while offering an ample 1.2-inch (30mm) jaw op...