|
|
-
3.0 of 5.0 with 2 Reviews
SALE PRICE: $585.00
Manufacturer: Megger
Brand: Megger
Model: MIT310-EN
Manufacturer: Megger
Brand: Megger
Model: MIT310-EN
|
The Megger MIT300 series insulation resistance tester measures insulation resistance, voltage, and continuity in electrical installations, building maintenance, and electrical testing. The average-sensing meter provides accurate readings when measuring linear loads, where the current or voltage has a sinusoidal waveform. The dual LCD screen indicates test results either digitally or with an analog arc function to replicate the response of analog meters. The tester measures insulation resistance from 0 to 1,000 megohms, voltage from 0 to 600V, and continuity from 0.01 to 100 ohms. The unit has a test inhibit function that prevents testing on circuits carrying over 50V. The tester is safety rated to European Standard EN61010-1, Category III, 600V. The unit is also Ingress Protection 54 (IP54)-rated for protection against dust and splashing water. The unit has a rubberized outer case for protection against bumps and short drops. The Megger MIT300 series is commonly used by electricians and electrical contractors.Specifications Continuity testing range 0.01 to 100 Ohms Insulation resistance range 0 to 1,000 megohms Voltage testing range 0 to 600V AC/DC Voltage test inhibit level 50V Power supply 8 AA alkaline or rechargeable batteries Weight 980g Safety standard met International Electrotechnical Commission (IEC)/European Standards (EN) 61010-1 Cat III 600V Mechanical standard met IP54, for protection from dust and splashing water Dimensions 203 x 148 x 78mm / 8 x 5.7 x 3.2 inchesH is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Electrical test meters report electrical circuit properties, such as voltage, resistance, capacitance, and continuity. Available in handheld or benchtop form, they detect electrical problems in equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the meter to a circuit or device. Single-function me...
-
3.0 of 5.0 with 3 Reviews
SALE PRICE: $611.19 45% OFF
Manufacturer: OTC
Brand: OTC
Model: 3857
Manufacturer: OTC
Brand: OTC
Model: 3857
The "Tech-Scope" is a 2-channel high speed lab and ignition oscilloscope. It has a millimeter function that can be used as a stand alone device or in conjunction with PC scan. It can be used anywhere an oscilloscope or multimeter is needed for fast and accurate automotive diagnostics. This scope with patented features is for the technician who wants an all-purpose scope to accurately test all electrical and electronic components on a vehicle. The unique features of this scope strongly compliment the PC scan diagnostic tools.
-
3.0 of 5.0 with 1 Reviews
SALE PRICE: $616.96
Manufacturer: Ideal Industries
Brand: Ideal Industries
Model: 61-796
Manufacturer: Ideal Industries
Brand: Ideal Industries
Model: 61-796
|
The Ideal 61-796 earth ground tester performs 2-point and 3-point fall-of-potential or simplified ground resistance testing when it is not possible to use auxiliary ground stakes, and measures ground voltage for new and existing buildings, structures, equipment, and electrical systems. The auto-ranging feature automatically determines the correct value range for the measurements. The data hold function with screen icon allows the user to retain the measurements on the display for manual recording. The battery indicator alerts the user when batteries are low to ensure accurate measurements. When in use, the 2 milliAmp (mA) measuring current does not trip ground fault breakers of the circuit under test. Ground-resistance meters are used by electricians and contractors working in industrial, utility, and field servicing. The Ideal 61-796 tester comes with a set of three test leads, two auxiliary earth spikes, a simplified measurement probe, a hard carrying case, and an instruction manual. Applicable safety standards are IEC/EN 61010-1 and Installation CAT III 200V. The meter is rated for use at pollution degree 2. Specifications Earth resistance ranges and resolutions 0 - 20Ω range (0.01Ω resolution); 0 - 200Ω range (0.1Ω resolution); 0 - 2000Ω range (1Ω resolution) Earth resistance accuracy + or - 2% reading + 2 digits or + or - 0.1Ω Maximum earth voltage 0-200V AC, 40-500Hz Earth voltage accuracy + or - 1% reading + 2 digits Operating humidity 80 percent Operating temperature 32 to 104 degrees F Power source (8) 1.5V AA batteries (included) Weight 1361g/3lbs. (including batteries) Dimensions 210 x 210 x 100mm (H x W x D)H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Ground-resistance meters test the condition of a grounding system, and provide resistivity measurements in ohms. The meters are available in digital, analog, and cl...
-
3.0 of 5.0 with 1 Reviews
SALE PRICE: $629.99 1% OFF
Manufacturer: Extech Instruments
Brand: Extech
Model: MG300-NIST
Manufacturer: Extech Instruments
Brand: Extech
Model: MG300-NIST
MultiMate/1000V Insulation Tester with Wireless PC interface (915MHz). Wireless USB interface transmits measurement data to a PC. This product is NIST Certified which indicates that the product is traceable to standards provided by the National Institute of Standards and Technology (NIST).
-
3.0 of 5.0 with 2 Reviews
SALE PRICE: $901.56 1% OFF
Manufacturer: Amprobe
Brand: Amprobe
Model: 4416090
Manufacturer: Amprobe
Brand: Amprobe
Model: 4416090
The Amprobe advanced wire tracer is a circuit tracer that locates and traces energized and non-energized wires, breakers, neutrals, and grounds to identify shorts, ground faults, and broken wires. It locates and traces wires in walls, floors, conduit, and computer cables and does not interfere with sensitive electronic equipment. Battery Booster to strengthen signal for open tracing. The Tracer is designed for use by electricians and electrical contractors.
-
3.0 of 5.0 with 2 Reviews
SALE PRICE: $949.00 1% OFF
Manufacturer: Amprobe
Brand: Amprobe
Model: 4416104
Manufacturer: Amprobe
Brand: Amprobe
Model: 4416104
|
The Amprobe AT-2005-A advanced wire tracer is a circuit tracer that locates and traces energized and non-energized wires, breakers, neutrals, and grounds to identify shorts, ground faults, and broken wires. It locates and traces wires in walls, floors, conduit, and computer cables and does not interfere with sensitive electronic equipment. The tracer includes an R-2000 receiver that can work with one of two transmitters. The T-2200 transmitter traces wire continuity and wire grounds on non-energized systems, while the S-2600 transmitter is compatible with energized 9 to 300V alternating current (AC) or direct current (DC). An included clamp-on transmitter accessory injects a signal for non-contact operation. The receiver can trace energized wires buried or hidden behind walls up to 13 feet deep. Supplied with Battery Booster to strengthen signal for open tracing. The AT-2005-A is designed for use by electricians and electrical contractors. Specifications Power supply for transmitter: (1) 9V battery (included) Power supply for receiver: (1) 9V battery (included) AC/DC voltage range: 0 to 300V Transmitter range: 0 to 13 ft. Amprobe manufactures electrical testing equipment for commercial, industrial, and home use. The company was founded in 1948 and is headquartered in Everett, WA. What’s in the Box? AT-2005-A Advanced Wire Tracer (1) S-2600-A Transmitter (1) T-2200 Transmitter (1) R-2000 Receiver (1) A-2201 CE Clamp-on attachment (1) B2024 Rechargeable battery pack (1 )B2025 Battery pack recharger (1) C2901 110V plug to banana plug set (1) C2902 alligator clips to banana plugs (2) 9V batteries (installed) Instructions
-
3.0 of 5.0 with 1 Reviews
SALE PRICE: $1,240.40 7% OFF
Manufacturer: AEMC
Brand: AEMC
Model: 3620 Kit-300ft
Manufacturer: AEMC
Brand: AEMC
Model: 3620 Kit-300ft
|
The AEMC 3620 portable analog ground resistance tester with 300 ft. leads performs 3-point fall-of-potential ground resistance testing and 2-point continuity tests on bonding, and is suitable for rugged use by maintenance crews performing multiple tests. The compact unit is well-suited for a range of applications, such as testing single rod and small ground grids at telecommunications sites, cellular towers, and for lightning protection systems, grounded equipment, and new construction. The tester is designed for ease of use, with “connect–press–read†operation, three color-coded terminals, and a large Press to Measure button. The tester displays direct readings from 0.5 to 1000Ω, with a separate marking for 25Ω. A manual zero adjust is provided for accurate readings. The instrument is engineered to reject high levels of interference in difficult conditions, such as high stray currents that can affect accuracy. Ground-resistance meters are used by electricians and contractors working in industrial, utility, and field servicing.The AEMC 3620 double-insulated tester with CE mark meets or exceeds IEC mechanical and safety specifications for shock, vibration, and drop tests. It is fuse-protected and can withstand 250V RMS in the event of a system fault with spikes of 3000V AC or 1000V DC. Safety ratings include EN61010-1, CAT III, and pollution degree 2. The tester kit includes two 300ft. color-coded leads (one red, one blue), two 100ft. leads (one green, one black), four 14.5" T-shaped auxiliary ground electrodes, five spaded lugs, and a 100ft. tape measure, a carrying case for the tester, and a carrying case for the kit accessories.Specifications Measurement range 0.5 to 1000Ω Operating frequency 128Hz square wave Test current 10mA Resolution 10mΩ Accuracy + or - 5% of reading + 0.1% of galvanometer scale length Operating temperature range -10 to 55 degrees C/14 to 131 degrees F Power source (8) 1.5V AA batteries (included) Weight 2.9lbs./1.3kg Dimens...
-
2.9 of 5.0 with 80 Reviews
SALE PRICE: $6.80 21% OFF
Manufacturer: SIENOC
Brand: SIENOC
Manufacturer: SIENOC
Brand: SIENOC
New LED Light Non-contact Ac Electric Voltage Tester Volt Alert Pen Detector Sensor 90-1000v. The next generation Volt Alert AC non-contact voltage testers are easy to use - just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know there is voltage present. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits in the workplace or at home.
-
2.9 of 5.0 with 10 Reviews
SALE PRICE: $11.48 24% OFF
Manufacturer: DROK
Brand: DROK
Manufacturer: DROK
Brand: DROK
Feature: Range: DC 0-600V (Need Extra Power Supply) Power Supply: 9-12V Backlight colors: Blue Power Consumption: < 0.2VA Resolution: 0.5% ±2 digit Cutting Size: 76x39 mm Dimensions: 79x43x25 mm Wiring: 1 & 2: Power Supply Port (Do not distinguish between positive and negative, Can Input Directly) 3 & 4: Measure Port (If Reversed will display Negative number, With reverse polarity protection) Package Includes: 1x Digital Voltmeter
-
2.9 of 5.0 with 21 Reviews
SALE PRICE: $42.47 1% OFF
Manufacturer: Klein
Brand: Klein Tools
Model: 632
Color: Silver
Manufacturer: Klein
Brand: Klein Tools
Model: 632
Color: Silver
|
Klein Tools Drive-A-Matic Cushion-Grip Adjustable Nut Driver gives you the proper size as you turn 'em! Topnotch tool! With a hex head that adjusts as you turn it, this Adjustable Nut Driver automatically fits 15 different nut and screw sizes. It will drive or loosen hex nuts from 1/4" to 7/16", hex-head screws from no. 6 to 1/4", and socket-head cap screws from no. 8 to 5/16". Thanks to its cushioned handle and premium components, this Adjustable Nut Driver delivers the top performance handymen have come to expect from Klein Tools since 1857. Features: Automatic fit for 15 different nut and screw sizes; Drives / loosens hex nuts from 1/4" (6mm) to 7/16" (11mm), hex-head screws from No. 6 to 1/4" (6mm), and socket-head cap screws from No. 8 to 5/16" (8mm); Head adjusts to the proper size as you turn it; Cushioned handle provides greater comfort and torque; Hollow shafts allow for work on long-bolt applications; Premium chrome-plated shaft resists corrosion; Measures 7"l. overall; Weighs approx. 6 ozs.; Order yours today! Klein Tools Adjustable Nut Driver
|
|