|
|
-
2.5 of 5.0 with 2 Reviews
SALE PRICE: $24.95
Manufacturer: Peak
Brand: Peak
Model: ATC02
Manufacturer: Peak
Brand: Peak
Model: ATC02
This Atlas LCR/ESR/SCR/DCA Hardcase is design to hold one Atlas tester and has space for its accessories too .This case is tough, very tough. With space for accessories too, this case will protect your instrument wherever you go. It's finished with high quality stitching and an embossed Peak logo. Complete with removable fabric carry strap (150mm length). External dimensions are 150mm x 120mm x 40mm. We do not recommend that you fit two instruments in this case (it's a bit tight and the 'on' buttons can get pressed)
-
2.5 of 5.0 with 2 Reviews
SALE PRICE: $29.95 1% OFF
Manufacturer: Sparkfun Electronics
Brand: SparkFun
Manufacturer: Sparkfun Electronics
Brand: SparkFun
|
Description: This new revision includes a JST cable and also fixes the TX/RX swap from the last revision. Now you can use an FTDI correctly. We are also including a 16-pin header instead of a 40-pin header (only 16 pins are necessary).This kit is a re-hash of Nuxie's FunCount frequency counting kit. It includes everything you need to build a frequency counter capable of measuring frequencies from 1Hz to over 6MHz. The measured frequency is displayed on a 16×2 black on green LCD.Our new design is based on the popular ATmega328. The ATmega comes pre-programmed with both the frequency counting firmware, and a serial bootloader, so you can program it as you would an Arduino. If you want to program it via Arduino, you'll need a FTDI Basic Breakout. Unused pins of the ATmega328 are broken out for all your custom firmware desires.The ATmega328 runs at 16MHz, and should be able to reliably count frequencies up to around 6.4MHz (assuming a 50% duty cycle). Voltage supplied to the kit should be 5VDC. The voltage input on the frequency pin should not exceed the supplied voltage, and should not go below 0V.The kit includes a 3-pin JST male connector, so you can use this wire to deliver +5V, ground and the frequency signal to the Counter. You'll also be able to piggy-back the counter onto our Function Generator Kit.
-
2.5 of 5.0 with 2 Reviews
SALE PRICE: $30.95 1% OFF
Manufacturer: P3 International
Brand: P3 International
Manufacturer: P3 International
Brand: P3 International
|
P3 International Kill A Watt Electricity Usage MonitorEmpowers You to Save Hundreds on Electric BillsWith electricity bills rising now you can cut down on costs and find out what appliances are actually worth keeping plugged in. Simply connect these appliances to the Kill A Watt, and it will assess how efficient they really are. The large LCD display counts consumption by the kilowatt-hour, the same as your local utility. Kill A Watt Meters can calculate your electrical expenses by the day, week, month, even an entire year. Also check the quality of your power by monitoring voltage, line frequency, and power factor. Now you will know if it is time for a new refrigerator or if that old air conditioner is still saving you money. Kill A Watt can help you reduce your power bill and will help find power-wasting appliances so you are able to decide whether it is worth keeping them plugged in. The Kill A Watt Meter is for standard 115 VAC appliances only, 15 amps maximum, 125 VAC maximum.Test The Quality of Your Home's PowerMeasuring appliance consumption is just the tip of the iceberg, the P3 Kill A Watt can also test if an outlet is working, or evaluate the quality of the electrical power provided by your utility company. It can detect voltage drops around the house, help to predict brownout conditions or to make sure a new home's outlets are in working condition before escrow closesTechnical Specifications• Calculate your Electrical Expenses by the Day, Week, Month or Year• Monitor Voltage, Line Frequency, and Power Factor• Helps Reduce your Utility Bill• Find Power-Easting Appliances• Test if an Outlet is Working• Dimensions: 11.8 x 3 x 7.2 inches ; Weighs 6.4 ounces
-
2.5 of 5.0 with 7 Reviews
SALE PRICE: $36.89 8% OFF
Manufacturer: Extech
Brand: Extech
Model: TP200
Manufacturer: Extech
Brand: Extech
Model: TP200
Type K Pipe Clamp Temperature Probe for hands-free superheat/sub-cooling temperature measurement from. -4°F to 200°F (-20°C to 93C)
-
2.5 of 5.0 with 4 Reviews
SALE PRICE: $42.46 63% OFF
Manufacturer: Honeywell
Brand: Honeywell
Model: THM5320R1000
Color: Multicolored
Manufacturer: Honeywell
Brand: Honeywell
Model: THM5320R1000
Color: Multicolored
Easily relocate thermostat or upgrade equipment without running new wires using this module and a wireless focuspro thermostat.
-
2.5 of 5.0 with 2 Reviews
SALE PRICE: $89.99
Manufacturer: Klein - Geneva Supply
Brand: Klein Tools
Model: MM1300
Manufacturer: Klein - Geneva Supply
Brand: Klein Tools
Model: MM1300
This Klein auto ranging multimeter measures AC/DC voltage, AC/DC current, resistance, capacitance, frequency, duty cycle, and temperature. It also tests diodes and continuity.
-
2.5 of 5.0 with 2 Reviews
SALE PRICE: $94.88 1% OFF
Manufacturer: ONETAK
Brand: ONETAK
Manufacturer: ONETAK
Brand: ONETAK
|
Features: - A test instrument appliable for maintenance of CATV System - Compact, light-Weight, easy to carry - With dual-channel measurement display, it's convenient and pragramatic - Able to measure Channel power, V/A, C/N, FM, Trunk Line Voltage - Channel and single frequency mode Specification: - Frequency/Channel: - Frequency scope: 47-870MHz - Channel: U.S. Standard Channel USA STD-CATV, U.S. digital standard channels USA STD-CATV - Frequency accuracy: +50x10E-6(+20 degreeC - +5 degreeC) - Level Measurement Measuring range: 30dBuV- 120dBuV Measurement accuracy: +/-2dB(+20 degreeC - +5 degreeC) Resolution: 0.5dB - Carrier-to-noise ratio measurement Measuring range: 20dB - 50 dB Signal input range: >=85dBuV Measurement accuracy: +/- 3dB(+20 degreeC - +5 degreeC) Channel scan: 150 - Voltage measurement: Input range: 1-100V (AC / DC) Measurement accuracy: +/-2V Resolution: 1V - Power supply: battery: 7.2V/1500mAH rechargeable battery AC Supply:: AC 90V-220V 50Hz-60Hz - Working time: 6h - Charging time: 3h Manual in CD
-
2.5 of 5.0 with 7 Reviews
SALE PRICE: $105.59 18% OFF
Manufacturer: Supco
Brand: Supco
Model: VG60
Color: Multicolored
Manufacturer: Supco
Brand: Supco
Model: VG60
Color: Multicolored
Supco -- a durable self contained battery powered vacuum gauge which displays the level of vacuum on led color coded read out. Gauge allows for in-line connection through the system or directly at the vacuum pump. 1/4" Male flare connection, uses (1) 9 volt battery (not included). Min. Order: 1 EA.
-
2.5 of 5.0 with 2 Reviews
SALE PRICE: $306.99 1% OFF
Manufacturer: Hantek
Brand: Hantek
Model: DSO4102C
Manufacturer: Hantek
Brand: Hantek
Model: DSO4102C
|
For more details, please visit offical website or contact us via message. This listing is edited by Sain Store. Pls choose us when you place order General Introduction for DSO4000C series: 2 Channel Digital Oscilloscope.1 Channel Arbitrary/Function Waveform Generator. The Keys for osilloscope and waveform generator is seperated for convenient to operate it simultaneously. Oscilloscope:200/100/70MHz Bandwidth, 1GSa/s Sample Rate.25MHz Arbitrary waveform generator, 12 bits resolution,200MHz DDS,7 inch 64K color LCD display, Resolution 800x480. Parameters: *Model:DSO4102C 1.Oscilloscope *Sample Rate:Sampling Rate Range:1GSa/s;Equivalent Sample Rate:25GSa/s 2.Acquisition Modes *Normal:Normal data only *Peak Detect:High-frequency and randon glith capture *Average:Wavefom Average, selectable 4,8,16,32,64,128 3.Horizontal *Sample Rate Range:1GS/s *Waveform Interpolation:(sin x)/x *Record Length:40K *SEC/DIV Range:4ns/div to 40s/div 4. Vertical *Vertical Resolution:8-bit resolution,all channel sampled simultaneously *Bandwidth:100MHz *Rise Time at BNC(typical):3.5ns 5.Trigger System *Trigger Types:Edge,Video,Pulse,Slope,Over time, Alternative *Trigger Source:CH1,CH2,EXT,EXT/5,AC Line *Trigger Modes:Auto, Normal, Single 6.Signal Source Mode *Waveform Impedance:DC-25MHz *Sample Rate:200MHzDDS *Output Waveform:Arbitrary wave/square wave/sine wave/triangle wave/trapezoidal wave/pulse wave/DC *Frequency Resolution:0.1% *Waveform Depth:4KSa *Frequency Stability:<30ppm
-
2.5 of 5.0 with 2 Reviews
SALE PRICE: $470.00 7% OFF
Manufacturer: GW Instek
Brand: GW Instek
Model: GOS-622G
Manufacturer: GW Instek
Brand: GW Instek
Model: GOS-622G
|
The Instek GOS-622G is a 20MHz, two-channel analog oscilloscope with ALT triggering, hold off function, trigger level lock control, Z-axis input, TV synchronization capability, high-frequency rejection circuit, and channel 1 output for electronics applications such as product design, assembly lines, repair and servicing, and electrical engineering education, among others. This oscilloscope has a vertical sensitivity to 1mV per division for capturing low-level signals. An ALT triggering function displays the signal from both channels simultaneously. The unit has a level lock control for adjusting the trigger level to stabilize the display of waveforms, and a hold off function for stabilizing complex signals that cannot be adjusted solely with the level lock. The Z-axis input modulates the intensity of the waveform, the TV synchronization circuit allows triggering of TV-V and TV-H signals, the high-frequency rejection circuit removes interference from a signal to prevent false triggering, and the channel 1 output can apply a signal to an external device, such as a frequency counter (sold separately). Additional specifications include a rise time of 17.5ns and various triggering features. The oscilloscope has a 6" CRT (cathode ray tube) display with an internal 8 x 10 division grid (each division is 1 cm) for viewing waveforms. It has European Conformity (CE) marking. It comes with two 60MHz passive voltage probes, a power cord for 100/120/220/230VAC, 50/60Hz, and a user manual. SpecificationsDisplay6" CRTBandwidth20MHzChannelsTwoPower sourcePower cord for 100/120/220/230VAC, 50/60HzDimensions (H x W x D)150 x 310 x 455 mmWeightApproximately 8.2 kgH is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Oscilloscopes are electrical testing devices used to verify the functionality of equipment that generates an electrical signal. Oscilloscopes measure the voltage of an electrical signal over time, ...
|
|