Electrical Testing - Page 849

Manufacturer: DROK Brand: DROK Model: 200198

Mode Instruction: Second mode: At time mode, press the key once, it will display seconds, display form: XX；it will back to hour&minute mode with no action in 30s. Press once to change mode. Date mode: At time mode, press key twice, it will display date, display form: month . day；it will back to hour&minute mode with no action in 30s. Press once to change mode. Timer mode: a. At time mode, press key 3 times, it will go Timer-mode, 00:00, it will back to hour&minute mode if you don't start timing. b. At timer mode, keep pressing the key to start timing, the dot( under the coma) begin flashing; Keep pressing key again to pause timing, the dot( under the coma) stop flashing; then keep pressing again to start. c. To reset timing, please cut off the power supply and keep pressing for 5s. d. At timer-mode, you can switch to hour&minute mode by pressing key, you can also view the date and second. Time setting: At hour&minute or second mode, keep pressing key till the digit display hour flashes, then press key to adjust. After finishing hour setting, keep pressing key till the digit display minute flashes, then press key to adjust. After finishing minute setting, keep pressing key till the digit display minute flashes, then press key to reset and keep pressing to exit and save time setting mode. Date setting: At date mode, keep pressing till the year "2015" begin flashing, which means it is setting mode; then press key to adjust the year. After finishing year setting, keep pressing key till the digit display month flashes, which means  it is minute setting, then press key to adjust the month. After finishing month setting, keep pressing the key till the digit display day flashes, which means it is day setting, then press key to adjust the day; keep pressing to exit and save time setting mode.

Manufacturer: Amprobe Brand: Amprobe Model: SV-U

Extremely easy to use, no buttons, no setups Automatically turns on and off Automatically selects AC voltage, DC voltage or continuity Indicates seven levels of AC or DC voltage Visual continuity indication (LED) Polarity indication Continuity buzzer Safety: CAT III 600V SPECIFICATIONS AC Voltage: 24/120/208/240/277/480/600 DC Voltage: 6/12/24/36/48/110/220 Continuity: 0-85 kOhms

Manufacturer: Test Products International, Inc Brand: TPI Model: A041

Silicone fused test lead set with screw on alligator clips. 600V maximum voltage. 5A maximum amperage. 4mm male banana plug. 16.5mm lead length. 1.2m prod length. 7mm jaw opening.

Manufacturer: 3M Brand: 3M Model: 923650-08

Test Clip SOIC8 3M brand 923650-08. 8-PIN TEST CLIP ALLOY SOIC .15'

Manufacturer: SMAKN Brand: SMAKN

*Operating voltage: DC7-9V *DDS frequency range: 1HZ-65534Hz. *High frequency (HS) square wave: 1 MHZ / 2 MHZ / 4 MHZ / 8 MHZ signal *DDS signal amplitude of the offset amount can be adjusted separately by two potentiometers; *DDS signals: sine wave, square wave, sawtooth, reverse sawtooth, triangle wave, the ECG wave and noise wave. *1602 LCD menu. *Section into the value: 1,10,100,1000,10000 Hz. *The power automatically restore the last used configuration. *Offset: 0.5pp-5Vpp *Amplitude amount: 0.5Vpp-14Vpp *KEY FUNCTIONS: The UP output waveform select The DOWN output waveform select LEFT output frequency - RIGHT output frequency + STOP / RUN the output stop / start *"UP" key waveforms order: *ECG = electrocardiogram wave (in the OFF state, the "left "and "right" keys to set the output frequency. Middle button start, all of the following waveform set) Rev Sawtooth = reverse sawtooth SawTooth = sawtooth Triangle = triangle wave Square = square wave Feedback: We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help. Our aim is to provide Top Level Customer Service, so we will try our best to solve any problem.Thank you very much!

Manufacturer: Pomona Electronics Brand: Pomona Model: 3561-2 Color: Red

An ideal test adapter for rapid testing of the hard-to-get at contacts of multi-pin/socket connectors. Flexible tip allows testing of adjacent contacts. Flexibility and full insulation protects against shorting or contact damage

Manufacturer: EISCO Brand: NEULOG Model: NUL201

NeuLog logger sensor measures voltages, and can be used with Van de Graaff generators, fuel cells, batteries, and parallel and series circuits for further study. The logger sensor has power and ground wires with 4.0mm plugs to connect to electric circuits, and is attachable to the NUL 202 current logger sensor to study current dependence on voltage in various electric circuits (sensor sold separately). The logger sensor has an experiment duration of 50.0 milliseconds to 31.0 days, and 15.0-bit analog-to-digital converter (ADC) resolution for reading a range of values. The logger sensor measures low-voltage AC and DC circuits and, with a step-down transformer, can measure the AC voltage of the main supply and check its frequency up to 50.0/60.0Hz. (Transformer sold separately; the sensor’s input is limited to 60.0Hz and +/-20.0V maximum.) The voltage logger sensor can be used for physics, electronics, chemistry, and biology experiments, and is suitable for grade 3 and higher, or ages 10 to 21. The logger sensor consists of a data logger, flash memory, and a sensor for fully self-contained data gathering, and is plug-and-play for immediate readings as soon as it is connected. The logger sensor sends data in digital format to a PC, Mac, tablet, smart phone, or other viewer device, and provides multiple connection options, including USB and wireless. The logger sensor’s browser-based software adjusts ranges and gains, and provides applications for presenting data, including online and offline modes, tables, graphs, data analysis, double-axis set up, statistic operations, and mathematical operations. The logger sensor is encased in durable plastic, and has an LED indicator to track experiment status, with push buttons for calibration and start/stop experiments in offline mode for ease of operation. To take an assortment of readings during a single experiment, the logger sensor can be attached to another sensor; one to 10 logger sensors can be used per experiment (sensors sold individually). For efficienc...

Manufacturer: Supco Brand: Supco Model: EM80 Color: Multicolored

The Supco EM80 auto-ranging digital sound level meter has a range of 30 to 120 dB and is used to analyze excessive sound level problems. The meter performs A-type frequency weighting in four ranges (60 dB, 80 dB, 100 dB, and 120 dB). It has a 0.1 dB resolution, a 1.5 dB accuracy for measurements under 94 dB, and a frequency range of 31.5Hz to 8KHz. The LCD displays measurements digitally and on a bar graph. Bar graph response time is 0.25 seconds and digital response time is 0.75 seconds. The meter complies with European Union (EU) 93/68/EEC, IEC 651 Type 2, and ANSI S1.4 Type 2 standards for sound-level meters for general field use. The meter has an operating temperature of -32 to +104 degrees F (0 to 40 degrees C) and operating humidity of 10 to 80 percent RH. It is powered by three 1.5V AAA batteries (included). The meter is 6-3/32 x 2-25/64 x 1-3/16 inches (H x W x D) and weighs 5.2 oz. (180g). The meter includes a carrying case.

Manufacturer: Mastech Model: A5PL60036

Manufacturer: Fotronic Corporation Brand: Yellow Jacket Model: 42041 Color: Multicolored

Heat pump manifold features two 800 psi gauges to read all heat pump pressure conditions. Traditional lo-side manifold gauges can be susceptible to damage when heat pumps go into heating mode. Because the lo-side gauge of the yellow jacket heat pump manifold is also designed for pressures up to 800 psi, it can read the pressure whether the pump is in heating mode, cooling mode or transition. Dials with 1% accuracy (Class 1) full scale movement provide the level of accuracy necessary for critical charge systems. Forged brass body for durability. Full porting maximizes capacity and flow. Full-size metal valve handles for easy operation. Hose assemblies UL recognized for 4000 psi (275 bar) burst and 800 psi (55 bar) working pressure.