Electrical Testing - Page 854

Manufacturer: SainSmart Brand: SainSmart Color: SainSmart 0-50kHz DDS Function Signal Generator Mo

Description: DDS Function / Arbitrary Waveform Generator uses direct digital synthesis technique (DDS), FPGA design, interior prefabricated 7 kinds of commonly used waveform while users can also edit the output 8-bit, 256 points user-defined arbitrary waveforms ; its easy to use , the signal high stability , low distortion , with 1 watt power output, wideband frequency measurement and counter functions. The output signal amplitude and DC offset can be adjusted. Main technology data: signal output: Output waveform Sine, square wave (variable duty cycle), triangle wave, sawtooth, Arbitrary waveforms, commonly used pulse, noise, ECG, AM, FM and other waveforms. Output amplitude ≥ 0.5-8Vp-p (no load) Output impedance 10 ohms ± 10% DC bias ± 3V Frequency Range 0.01Hz ~ 50kHz Frequency resolution 0.01Hz(10mHz) Frequency Accuracy ±5×10-6 Frequency Stability ±2×10-6/3hours Sine wave distortion ≤0.8% (Reference frequency 1kHz) Triangle wave linearity ≥98% (0.01Hz~10kHz) Square wave an increase of Fall Time ≤100ns Square wave duty cycle range 1%~99% Package list: 1 x DDS module

Manufacturer: Rigol Brand: Rigol Model: RP2200

Rigol RP2200 Oscilloscope 150 Mhz Passive High Resistance Probe Accessory Features RP2200 is provided with several accessories designed to make probing and measurement simpler. Please take a moment to familiarize yourself with these accessories and their users.   For digital oscilloscopes, the signal under test needs to be connected to the measurement channel via various oscilloscope probes or 50 ohm cables.The Probing is very important to making quality measurements. If the probe performance is not adequate or if you did not select the proper probe for your application, you will see distorted or misleading signals on your oscilloscope. There are two kinds of probes, one is passive probe, another one is active probe. active probe requires power while passive probe does not. For general-purpose measurements(600 MHz), active probes are the way to go. They cost more than passive probe and their input voltage is limited, but because of their significantly lower capacitive loading, they give you more accurate insight into fast signals.

Manufacturer: Floureon Brand: Floureon Model: TS-838

Features: Measures various parameters: power (W), energy (kWh), volts, amps, hertz, power factor and maximum power (W), time, days - kWh is vital as this is what your electricity bills are based on! Overload Protection Function, overload warning Large, clear LCD display for easy reading (screen dimension: 50mm x 43mm) Cumulative Kilowatt-Hour Monitor Calculates electricity expenses Electricity price setting by pressing SET, VALUE, DISPLAY Can also set energy Price for night separately Sets electricity price value which ranges 0.000COST/KWH ~9.999COST/KWH Low power consumption Power supply: 2*1.5V Button cell backup - allows meter to be moved (and viewed) without losing readings. NO Backlight Specifications£º Overload Protection Function: When the whole power exceeds the rated power of monitor, the monitor will cut off the current and prevent being damaged Operating voltage: 120VAC Frequency display: 50/60HZ Operating current: max 15A Wide voltage range: 110V-130V Wattage display (Watts) is 0~1800W -Current range: 0.01A~19.99A Resolution: 0.5W Indication of frequency: 46-65HZ Measurement of consumption: 0.00 to 9999.99 KWh Duration of indication: up to 9,999 hours 59 minutes 3-pin US plug Package Inlcuded: 2X Power Meter(US Plug) NOTE: 1. The Button battery is used to keep the data when not using the monitor. When the button battery is used up, and you plug out the monitor from the outlet, the data in the monitor and the previous setting will disappear. 2.If an abnormal display appears or the buttons produce no response, the instrument must be reset. To do this, please press the RESET button.

Manufacturer: Pomona Electronics Brand: Pomona Model: 1823-2 Color: Red

Manufacturer: DROK Brand: DROK Color: White

Basic Parameters: Dimension:110x65x40mm Adaptable Voltage: AC 160-280V/ 50Hz Power: 1-3000W (can display running power less than 1W) Electricity consumption: 0.0001-999.9 kWh Electricity cost : 0-9999 $ Ratio of operation condition: 0-100% Running time: 0-60 minutes to 24 hours to 999 days Peak load: 15A Measurement accuracy: +/- 1% Refresh rate: more than one time per second Operating Temperature: -10-60 °c Humidity:10-95% RH   Display units: AC voltage: xxxx V Accumulated Electricity consumption: xxx.x kWh Accumulated electricity cost: xx.xx $ Running power: xxx.x W Ratio of operation condition: xxx% Time:xx:xx(hours:minutes); xxx D(days)   Applications: Voltage measurement for power supply Check electricity consumption Measure real-time running power Check electricity cost Monitor operation condition of electricity appliance Check running time of electricity appliance (please refer to the user manual for more details)   Precautions: Limit to indoor use, -10-60 °c, 10-95% RH This product should not be used for a long time with appliance 2000W, the continuous working time is preferably less than 1 hour Please don't long press the "UP" and "DOWN" simultaneously, this would be irreversible reduce power monitoring accuracy   Package includes: 1x Multi-function Power Meter Australia Plug 1x English User Manual

Manufacturer: Reed Brand: Reed Instruments Model: FC-108G

The REED FC-108G safety test lead kit includes safety test leads, alligator clips, test probes all in a convenient carrying case.

Manufacturer: SIMPSON Brand: Simpson

SIMPSON 07500 LEADS CONNECTOR ASSEMBLIES, LEAD SET TEST

Manufacturer: Fluke Corporation Brand: Fluke Model: L207

Powerful, lightweight, mini-Xenon worklight shines right where you're working. Comes with Limited Edition Fluke Collector's Cap. Cap adjusts for all-day comfort. Light attaches to bill of baseball cap. Rugged light withstands 6' drops to concrete. Waterproof light case won't crack or chip. Electrically and thermally nonconductive.

Manufacturer: Pomona Electronics Brand: Pomona Model: 2894-0 Color: Black

Material: Body – Brass per QQ-B-626, Alloy 360, 1/2 Hard. Finish: Nickel plate per QQ-N-290, Class 2, 200/300 micro-inches. Insulation: Polycarbonate. Color: See Ordering Information Banana Plug: Body: Brass per QQ-B-626, Alloy 360, 1/2 Hard. Spring: Beryllium Copper per QQ-C-533, Alloy 172, Cond. Finish: Nickel plate per QQ-N-290, Class 2, 200/300 micro-inches. Insulation: Material: Polypropylene molded to Binding Post and Banana Plug bodies. Marking: "2894, POMONA ELECTRONICS, CALIF." Operating Voltage: Hands free usage in controlled voltage environments: 2500 Vrms maximum. For CE compliance: not intended for hand-held use at voltages above 33 Vrms/70 Vdc. Operating Temperature: +50°C (+122°F) Max. Current: 15 Amperes

Manufacturer: Amprobe Brand: Amprobe Model: VPC-30

The Amprobe VPC-30 electrical tester is a non-contact voltage and continuity tester for measuring alternating current (AC) and direct current (DC) voltage and continuity on live electrical wiring. This average-sensing meter provides accurate readings when measuring linear loads, where the current or voltage has a sinusoidal waveform. The ground fault circuit interrupter (GFCI) test feature allows the unit to test GFCI outlets and breakers. The tester measures AC and DC voltage up to 1000V and indicates ten common voltage levels for AC and ten for DC. The backlit LCD display indicates precise voltage measurement. An LED light and buzzer indicate continuity. A solenoid tester-like shaker indicates the presence of AC voltage. Bi-color LEDs indicate safe and dangerous voltages (above 55VDC or 30VAC). The tester is safety rated to European Standards 61010-1 Cat IV, 600V and Cat III, 1,000V. The casing is ingress protection (IP) treated to IP65 for complete protection against dust and water jets up to 6.3mm in diameter. The unit is autoranging on all ranges. It is powered by two AAA batteries (included). The VPC-30 is designed for use by electricians, electrical contractors, and mechanics. Specifications Power supply AAA batteries (two, included) AC voltage range 0 to 1,000V DC voltage range 0 to 1,000V AC current range 0 to 400A Weight (including batteries) 0.485lb./220g Safety standard met International Electrotechnical Commission (IEC)/European Standards (EN) 61010-01 Cat IV 600V and Cat III 1,000V Ingress Protection (IP) rating IP65, for protection against dust and water jets up to 6.3mm in diameter Dimensions 9.17x 2.24 x 1.57 inches / 233 x 57 x 40mm (H x W x D)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Electrical test meters report electrical circuit properties, such as voltage, resistance, capacitance, and continuity. Available in handheld or benchtop models, ...