Thermal Imagers - Page 5

Manufacturer: HT Instruments Brand: HT Instruments

HT Instruments COMBI 419 Multifunctional Meter for Safety Test on Installations Meter for Insulation test and Continuity of earth conductor test with use of remote probe. COMBI419 is an innovative multifunction installation tester designed to perform all safety test verifies on electrical installations in compliance to recently standards (VDE0100, BS7671 etc..), more than measure of leakage currents. The multifunction installation tester COMBI419 it's very easy to use and have a wide number of internal features which are selectable by using the multi language menu. The instrument permits, moreover, to start principal measures by using a special remote prove (PR400 optional accessory) particular useful to perform tests in very quickly mode and the AUTO internal function to perform sequential measurements of Global Earth Resistance, test on RCDs' and Insulation directly on sockets of civil installations. A contextual help menu selectable by user it's available for each measurement function and permits a valid information during connection of meter to the installation. The newest electronic function selector give to the meter a extreme rugged structure for perfect using "on field". A wide internal memory permits the saving of any measurements and the transfer to PC by serial port with dedicated software it's possible. Each measure it's saved with all the sub-results and test parameters with up to two ID locators (selectable by user on meter) in order to reach the exact point where the measure was performed. Help on line (available on each function) to support the user while connecting the instrument to the installation under measurement Each model permits the Start of measurements with remote probe (PR400 optional accessory) General menu to quickly selection of available test performed by meter (COMBI419 and COMBI420 models only)

Manufacturer: Fluke Brand: Fluke

SILVER CAREPLAN TI32/TIR32 2 YR

Manufacturer: HT Instruments Brand: HT Instruments

Ground Resistance and Bonding Continuity Tester New Icon Menu Easy to use and to connect Innovative Design       One instrument for all electrical safety tests according to IEC/EN61557-1. Earth resistance with 2- or 3-pole volt-ampere method in TT, TN and IT systems, non-trip earth loop impedance measurement. Measurement of electrical parameters in single phase installations (V, A ,W,VAR,VA, PF) Continuity measurement of protective conductors. Soil resistivity. Insulation resistance measurement. Stackless earth ground resistance measurement with T2100 (optional).   MACROTESTG1 EARTH GROUND | CONTINUITY | POWER QUALITY   MACROTEST G1 is an innovative multifunction installation tester capable of carrying out safety tests on civil and industrial electric systems in compliance with IEC/EN61557-1. Its resistive TFT color touch-screen display, its icon menu, its help-on-line and its user-friendly development make the instrument extremely intuitive even for unskilled users. Its numberless features grant the user a wide range of applications in the world of measurements. The multifunction installation tester MACROTEST G1 allows saving all measures into an internal memory so transferring the saved data to a PC by means of USB (provided as standard) or built in Wi-Fi interfaces with an iOS and Android smartphones or tablets.The software supplied among standard accessories allows printing testing reports.The multifunction installation tester MACROTESTG1 has as Optional clamp T2100 permits to quickly check the resistance of earth probes without disconnection from earth system

Manufacturer: Fluke Brand: Fluke

Maintenance and Extended Warranty Plans for Your Fluke Infrared Camera Repairs are always unexpected and they can be costly. Keep your camera in top operating condition and control your cost of ownership with a Fluke Silver CarePlan. Fluke CarePlans provide you the highest level of service at the best price available. They are easy to purchase and register. All Fluke CarePlans help you minimize your downtime and protect your investment in your Fluke infrared camera as coverage starts from the moment you register. Ensure your peace of mind by protecting your investment beyond your factory warranty by purchasing a 3 Year Fluke CarePlan. You can also extend your warranty for up to two additional years. Fluke CarePlans - Everything You Need to Make Your Life Easier and Worry-Free Silver CarePlan A comprehensive maintenance and extended warranty plan, including one annual performance check. Purchase this plan if you want free repairs and one annual free performance check, but not necessarily a calibration. Qualifying for Your CarePlan Purchase You may purchase your CarePlan at the time you order your new instrument or anytime within six months of original purchase date with proof of purchase from an authorized dealer (or from date of manufacture without proof of purchase). How to Purchase Pre-Purchase Registration is Required Careplan pre-purchase registration is required prior to processing your order. To pre- register simply go to CarePlans to download a CarePlan product registration form. You can also obtain a CarePlan registration form by contacting Fluke in your area. Complete this form and include it with your purchase order. When Does My Coverage Start? As soon as you receive your CarePlan documents and complete your on-line registration you begin enjoying your CarePlan benefits of First-on-bench priority handling, comprehensive repair coverage, Loaner services, annual performance checks or calibrations

Manufacturer: Testo Brand: Testo

The Testo 870-1 offers sharp, crisp, detailed, commercial quality images every time, right out of the box with the widest lens (34º x 26º) available. Stack this up with the easy 1-button control and you have a technologically advanced, well thought-out thermal imaging solution for Commercial Contractors, Facility Managers and Energy Auditors. The testo 8701 balances features and performance in an easy-to-use, small, compact design.

Manufacturer: HT Instruments Brand: HT Instruments

HT Instruments RL-11-60 Focal lens (11mm) for THT 60 FOV 20.6 Degree x 15.5 Degree

Manufacturer: DALI Brand: DALI

shipping:DHL etc Resolution：uncooled 384X288 Display：OLED 640*480 Function： Record Video, Take Photo

Manufacturer: DALI Brand: DALI

shipping:DHL etc Resolution：uncooled 160×120 FOV/Min focuse range:25°×19°/0.1m Thermal Sensitivity：≤0.06℃@30℃ Temperature Range:30℃-+42℃ Accuracy：±1℃ Screen：3.5" TFT colorful LCD Visual Camera：1.3M pixels Resolution，CMOS module

Manufacturer: REED Instruments Brand: Reed Instruments Model: R2100-KIT

The REED R2100-KIT General Combo Kit consists of a selection of test tools bundled together to save you money and to satisfy your general maintenance needs. It comes with a REED R2100 Thermal Imager which is REEDS first industrial and commercial maintenance thermal imager, a REED BS-150 video bore scope that features a viewing distance of 15 to 25cm (5.9 to 9.8") and 10° adjustable lighting and a REED LM-8000 Thermo-Anemometer that is a Multi Function Environmental Meter that is an anemometer, humidity meter, light meter and type-K digital thermometer combined into one compact instrument.

Manufacturer: FLIR Systems, Inc. Brand: FLIR Model: T198482

FLIR iSeries thermal imaging car charger. Re-charge anywhere at your convenience. Suitable for any FLIR iSeries IR camera.