Temperature Probes & Sensors - Page 6

Manufacturer: Cooper-Atkins Corporation Brand: Cooper Model: 55032

The Cooper-Atkins 55032 Type K thermocouple replacement 4" needle probe measures temperature from -100 to +500 degrees F (-73 to +260 degrees C). Its reinforced 35-1/2" fluoroelastomer cable wraps around the sensor unit (sold separately) for storage. This probe is for use with the Cooper-Atkins AquaTuff 350 Wrap&Stow series thermocouple instruments (sold separately), and is used for monitoring the temperature in food service and industrial applications.Cooper-Atkins manufactures time, temperature, and humidity instruments for industrial, HVAC/R, health care, and food safety applications. The company, founded in 1884, is headquartered in Middlefield, CT.

Manufacturer: Cooper-Atkins Corporation Brand: Cooper Model: 50012-K

The Cooper-Atkins 50012-K Type K thermocouple angled bell probe measures temperature from -40 to +500 degrees F (-40 to +260 degrees C). The probe bends at a 120-degree angle and has a flat sensor measuring 17mm in diameter for surface contact. It has a response time of 4 seconds on an oiled surface for fast readings. The polyurethane coiled cable extends to 4' and withstands temperatures up to 176 degrees F (80 degrees C). This probe is for use monitoring temperatures on grills and griddles in food service applications.Cooper-Atkins manufactures time, temperature, and humidity instruments for industrial, HVAC/R, health care, and food safety applications. The company, founded in 1884, is headquartered in Middlefield, CT.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: TS-13010 Color: Black, Red

The TS Digital Temperature Switch is designed to regulate many heating and cooling applications. Easy programming via the tactile front keypad enables quick setup of the 12 parameters for simple, reliable operation. The user can define set point, heating/cooling regulation, hysteresis, cycle time, ambient probe adjustment and defrosting time. The unit features error or alarm messaging and password protection. View probe temperature on the bright red, 3-digit LED display. Select between temperature display in °F or °C, and 110 VAC, 230 VAC, or 12 VDC power supplies. The Series TS includes a thermistor with 5 ft (1.5 m) cable, fitting clips for panel mounting, gasket, rear terminal cover, and instruction manual.

Manufacturer: Cooper-Atkins Corporation Brand: Cooper Model: 10046-K

Male-to-female extension cable used to add length to a probe cable. Cable features include: Kevlar reinforced, braid, and Silicone outer jacket.

Manufacturer: Cooper-Atkins Corporation Brand: Cooper Model: 50014-K

The Cooper-Atkins 50014-K Type K thermocouple weighted surface probe measures temperature from -40 to +500 degrees F (-40 to +260 degrees C). The PTFE (polytetrafluoroethylene) probe measures 2.5" in diameter and is for use monitoring temperatures on grills and griddles. It has a response time of 2 seconds on an oiled surface for fast readings. The flexible armor lead measures 30" and withstands temperatures up to 400 degrees F (205 degrees C). This probe is for use monitoring temperatures on grills and griddles in food service applications.Cooper-Atkins manufactures time, temperature, and humidity instruments for industrial, HVAC/R, health care, and food safety applications. The company, founded in 1884, is headquartered in Middlefield, CT.

Manufacturer: Cooper-Atkins Corporation Brand: Cooper Model: 35140 Color: Unknown

The Cooper-Atkins 35140 AquaTuff Wrap&Stow dual-scale digital type-K thermocouple temperature sensor measures temperatures from -100 to +500 degrees F (-73 to +260 degrees C), and has a 1mm reduced tip probe and reinforced cable. This system has an accuracy of + or - 0.9 degrees F (0.5 degrees C). Its probe measures 3.5" and has a 1mm tip for reduced impact. The 0.5" high LCD screen displays temperature readings. The unit operates on two AAA batteries, and turns off automatically after 10 minutes of non-use to conserve battery life. The probe's reinforced cable wraps around sensor unit for storage. It is Ingress Protection certified IPX7 for protection against immersion in water up to 1m. This temperature sensor is for use in industrial or food service environments.SpecificationsSensor typeType KTemperature range-100 to +500 degrees F (-73 to +260 degrees C)Resolution0.1 degreeAccuracy+ or - 0.9 degrees F (0.5 degrees C)LCD0.5" highIngress ProtectionIPX7CertificationsCE, WEEE, RoHS, NISTPower(2) AAA batteriesDimensions7.125 x 2.75 x 1.375 inches/ 180 x 70 x 35mm (H x W x D)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Cooper-Atkins manufactures time, temperature, and humidity instruments for industrial, HVAC/R, health care, and food safety applications. The company, founded in 1884, is headquartered in Middlefield, CT.What's in the Box?35140 AquaTuff Wrap&Stow temperature sensorProbeInstructions

Manufacturer: MICROCHIP Brand: MICROCHIP

MICROCHIP MCP9701-E/TO IC, TEMP SNSR, ±2°C, 3-TO-92

Manufacturer: DROK Brand: DROK Model: 300003

Description: Probe temperature sensor chip: DS18B20 Stainless steel housing: 6 * 50mm Lead length: 100cm Power supply: 3.0V ~ 5.5V Adjustable resolution: 9 to 12 digits Wide testing temperature range: -55 °c ~ +125 °c Output leads connection: red (VCC), green (DATA), black (GND) Feature: Its probe is made of stainless steel which is waterproof, moisture-proof and anti-rust Note: Please note that the temperature probe requires no external components and has single bus interface Package include: 1x DS18B20 temperature sensor probe

Manufacturer: MICC Brand: MICC Color: Yellow

This listing is for 1 set of the Standard K-Type Thermocouple connector, one male and one female each per set. They conform to the standard connector dimensions with two round prongs and the K-Type Thermocouple Wire specification. Use a pair to build extensions or to patch a broken thermocouple wire connection. This is a high quality connector, the prongs are made from compensating metal, the same material as the k-type thermocouple wire, which is chromel / alumel. Specification: Yellow, for K-Type Thermocouple Wire: Chromel / Alumel

Manufacturer: Yeeco Brand: Yeeco Model: 1500127

Product Name: K-type thermocouple temperature probe temp sensor Specifications Model: M6 threaded probe Temperature range: 0-600 ℃ （Degrees Celsius ）， 1% Accuracy Probe length: 26.04MM Probe diameter: 4.78MM Thread Diameter: 5.90MM Packing including: 1x K Type Thermocouple Temperature probe