Thermometers - Page 91

Manufacturer: Sper Scientific Brand: Sper Scientific Model: 800254 Color: White

Monitor RH & temperature inside an environmental Chamber or clean room without opening the door. Place the weatherproof (Ipx3) sensor outdoors, in Green houses, warehouses, air ducts and other hard to REACH places and continuously monitor ambient RH & temperature from a remote location. The wireless sensors broadcast to the monitor from up to 100’ (30M) away without obstructions, using a wireless RF signal. The monitor displays the local and remote temperatures in ºC or ºF, recalls min/Max on both, and indicates when the batteries are low in both the sensors and monitor. It also displays user adjustable, audible and visible, Hi/Lo alarms, on both temperature and RH, for the base unit and the remote sensors. The monitor comes with one sensor that also displays local RH and temperature and stands on a Bench or wall mounts. Each monitor can be paired with up to 3 sensors with the additional sensors sold separately. Comes with 2 x AAA batteries for the monitor and 2 x AA batteries for the sensor. Available with an optional N.I.S.T. Traceable Certificate of compliance. Dimensions: monitor: 3 1/8" x 3 1/8" x 1 1/4" (80 x 80 x 30 mm) sensor: 4 1/2" x 2 1/2" x 1" (110 x 60 x 30 mm). weight: monitor: 4 oz. (113 G) sensor: 4 oz. (113 G) with batteries.

Manufacturer: Fluke Corporation Brand: Fluke Model: 59 Max

The Fluke 59 Series Infrared Thermometer is designed to provide precise laser technology for more accurate and repeatable measurements. It has a large, easy-to-read backlit LCD display for easy viewing. It is small and lightweight design fits easily fits into your tool box. It displays the minimum, maximum or average temperature, or the difference between two measurements. It has Hi and Lo alarms for rapid display of measurements outside the limits. It is powered by one (1) AA battery, and comes with a one year warranty.

Manufacturer: WIKA Instrument Corporation Brand: WIKA Model: 32025D206G4

WIKA TI.32 bimetal thermometers is similar to TI.30 and TI.50 but with an all-angle swivel connection. The hermetically-sealed case offers protection from weather and dust, and is guaranteed against fogging up. WIKA TI.32 Thermometers is guaranteed for 7 years. Ranges: -100 degree F to 1000 degree F (and equivalent Celsius). Working range - steady: full scale value, short time: 110 percent of full scale value. Over range: temporary over or under range tolerance of 50 percent of scale up to 500 degree F. (260 degree C). For ranges above 500 degree F, maximum over range is 800 degree F, continous. 1000 degree F intermittent. Connection: material 304 stainless steel; Adjustable angle, 1/2" NPT. Measuring element: bi-metal helix. Pointer: black aluminum. Stem: 304 stainless steel material, Stem measures 1/4" diameter by 2-1/2" length. Case: 304 stainless steel Material, hermetically sealed per ASME B40.3 standard Ingress protection IP 65 external reset slotted hex head on back of case. Dial: anti-parallax, heavy gauge aluminum with white matte finish. Dampening: inert gel to minimize pointer oscillation. Standard scales: single: fahrenheit or celsius; dual: fahrenheit (outer) and celsius (inner). Window gasket: neoprene silicone (-100 degree F and over 550 degree F). Window: flat instrument fully gasketed glass. Movement: viscous inert gel to enhance pointer operation. Hermetic Seal: Per ASME B40.3, IP65, NEMA 4X.

Manufacturer: Thermco Brand: THERMCO

ASTM Saybolt Viscosity S18F non- mercury thermometer, blue spirit filled ASTM Saybolt Viscosity S18F non- mercury thermometer, blue spirit filled, immersion total, length 280mm, Range : +94 to 108degree F, Divisions: 0.2degree F. This listing is for Each

Manufacturer: Yestech Brand: Tasi

TASI Mini Infrared Thermometer Speedy. Sanitary. Safe. With the item , you'll have the ability to measure high temperatures, hazardous and inaccessible objects, and even moving targets, all in less than one second. Accurate readings are as simple as pulling the trigger and aiming. And the thermometer's non-contact design eliminates risk of contaminating or mechanically effecting the target, so you can tackle the job worry-free. Specifications: Model:TASI-8603 Temperature range: -50 to 330℃/ -58 to 626℉ Accuracy:0℃ to 330℃(32℉ to 626℉): ±1.5℃(±2.7℉) or ±1.5% -50℃ to 0℃(-58℉ to 32℉): ±3℃(±5℉) whichever is greater Resolution: 0.1℃ or 0.1℉ Storage temperature:-20 to 60℃(-4 to 140℉) without battery Power: 1.5V AAA battery x 2,not included Distane to Spot size:12:1 Dimension: approx.145x75x35mm/5.7x3.0x1.4" Weight:approx.150g 100% brand new Suitable for: Checking the temperature in bath water, heater&oven, cooking surfaces, hot engine parts, hot tubes&insulation, electrical connection, ballast in electrics lights, electric motors&bearings, wine coolers&hot asphalt, fuse panels&transformers, swimming pools&fish tanks, hot&cold food products, heating&air condition, etc. Package Includes: 3 x TASI-8603 Thermometer 3 x Instruction Manual(in English) 3 x Original Packing batteries not included

Manufacturer: Etekcity Brand: Etekcity Model: Lasergrip 1022 Color: Blue

NOTE1. The measuring surface is about 2cm below the infrared aiming point.2. For best accuracy, the distance between the thermometer and object of measurement shold approximately be 14.17inches (36cm).Aim with precision at whatever you wish to measure, thanks to the laser beam guidance feature. Even from a far distance, the laser provides a mark to ensure accuracy every time you make a measurement.Infrared LensThe Infrared lens inside the Lasergrip 1022 Thermometer provides temperature readings without the need to touch or come close to anything dangerously hot or cold. You'll be able to effortlessly measure high temperatures, hazardous and inaccessible objects, and even moving targets; such as hot engine parts, cooking surfaces, swimming pools, bath water, wine coolers, hot asphalt, electric bearings, and much more.0.1 - 1.0 Adjustable emissivity!Most organic materials and painted or oxdized surface have an emssivity of 0.95. Other materials, such as polished metal surface, have a different emissivity level, which should be taken into account for accurate temperature measurement. With adjustable emissivity, this thermometer can give you a more reliable result.SpecificationsTemperature Range: -58℉-1022℉(-50℃-550℃)Accuracy: ±2% or 2℉/2℃Distance Spot Ratio: 12:1Emissivity (Adjustable): 0.1-1.0Response Time:

Manufacturer: Arco Electronics Limited Brand: Smart Sensor Model: AS8902 Color: Red

• Detection of gas: Combustible Gas• Measuring range: 0~100%LEL• The principle of sensor: Electrochemical principle, life for two years• Basic error:

Manufacturer: Stewart-Warner Brand: Stewart Warner

This offer is for 1- New Stewart Warner Water Temperature Gauge Model 82326-60 MADE IN USA*** 100-265 degrees F. 2-1/16" Diameter. Black Face with white lettering . Full sweep. Mechanical sending unit with mounting instructions included. Temperature Gauge - Water, P/N 82326-60 Scale 100-265 °F Bezel/Finish Polished Type Mech./60" Tubing Ø in 2-1/16" Match N/A Model Deluxe

Manufacturer: Thermco Brand: THERMCO

Small, lighweight, economical precision infrared thermometer. Design permits one handed point and read. Laser sighting permits precise targeting to measureing surface. NIST traceable certificate is provided for assured accuracy. Belt holster and 9v battery included. CE marked. Temperature Range: -50°~530°C (-58°~986°F). Accuracy: ±2 or 2°C. Distance Spot Ratio: 12:1. Emissivity Adjustable: 0.95. Response Time - Wavelength: 500ms (8-14) um. Repeatability: ±1% or ±1°C. Resolution: 0.1°C or 0.1°F. Storage Temperature: -20-50°C (-4-122°F). Operating Temperature: 0-50°C (32-122°F).

Manufacturer: WIKA Instrument Corporation Brand: WIKA Model: 50060D006G4

WIKA bimetal thermometers are ideal for most rugged industrial temperature measurement applications. The hermetically- sealed case offers protection from weather and dust, and is guaranteed against fogging up. WIKA Type TI.50 thermometers are guaranteed for 7 years. Ranges: -100 degree F to 1000 degree F (and equivalent Celsius). Working range - steady: full scale value and short time: 110 percent of full scale value. Over range: temporary over or under range tolerance of 50 percent of scale up to 500 degree F. (260 degree C). For ranges above 500 degree F, maximum over range is 800 degree F, continous. 1000 degree F intermittent. Connection: material 304 stainless steel, Center back mount (CBM), 1/2" NPT. Measuring element: bi-metal helix. Pointer: black aluminum. Stem: 304 stainless steel material, stem measures 1/4" diameter by 6" length, TIG welded at tip and case connection. Case: 304 stainless steel Material, hermetically sealed per ASME B40.3 standard Ingress protection IP 65 external reset slotted hex head on back of case. Dial: anti-parallax, heavy gauge aluminum with white matte finish. Dampening: inert gel to minimize pointer oscillation. Standard scales: single: fahrenheit or celsius, dual: fahrenheit (outer) and celsius (inner). Window gasket: neoprene silicone (-100 degreef and over 550 degreef). Window: flat instrument fully gasketed glass. Movement: viscous inert gel to enhance pointer operation. Hermetic Seal: Per ASME B40.3, IP65, NEMA 4X.