Temperature Controllers - Page 3

Manufacturer: BrainyTrade Brand: BrainyTrade

This is a set of temperature controller, PT100 and solid state relay SSR-25DA. The dual line display universal digital programmable temperature controller supports many types of thermocouple sensor. It can be powered by 90-265V AC/DC, Comsumption:5VA. It can also worked as simple digital adjustor. Temperature Controller 1.Individually programmable PID control or ON/OFF control. 2.Auto-tuning PID adjustment: 3 build-in Auto-Tuning Time proportion PID Algorithms to choose for different applications or environments to be controlled. 3.Display: Dual display for Fahrenheit(F) and Celsius(C), Range: -1999 to 9999 (depends on the input signal) 4.Input: Thermo Resistor: PT100, Cu50, Thermocouple: J,S,K,E,Wre3 ~ Wre25 5.Main Output: SSR: Open circuit: 4V, Closed Circuit: 24V 40mA DC 6.Manual/Auto-tuning PID cooling/heating control( or normal alarm output) 7.1 RELAY alarm: Normal open, capacity 250V/3A AC or 30V/3A DC with 7 kinds of alarm mode: high / low / high deviation / low deviation/ interval / out of interval /breakage alarm Solid state relay 1.One key operation, Auto-tuning PID/ Fuzzy PID control. Easy operation, Reliable performance 2.Input: TC(K?J?S?E)/ RTD(PT100?CU50)universal input, or 4-20mA/0-10V/0-75mV signal from standard pressure/level transmitter. 3.Control output: SSR none contact control. Total Net Weight: about 310g

Manufacturer: Davis Instruments Brand: Davis Instruments Model: 6475

Stainless Steel Temperature Probe w/RJ ConnectorMeasure temperature of air, soil, or water with this multi-purpose temperature probe.Add up to four probes to a single Leaf & Soil Moisture/Temperature Station. Or add to Vantage Connect and use in place of Vantage Connects internal temperature sensor. Great option for measuring water or soil temperature without adding another station.Probe has a 2-1/2 (64mm)-long stainless steel housing and includes 15 (4.6M) direct-burial cable.Compatible with Wireless Temperature Station (6372), Weather Envoy (6316), Envoy8X (6318), and Anemometer/Sensor Transmitter Kit (6332).

Manufacturer: Inkbird Brand: Inkbird Model: ZIB-037-XX Color: Cooling and Heating Thermostat + 5cm Probe Thermoc

Features of the temperature controller include : 1. Controllable range of -58 - 210 ° F, choice of Celsius or Fahrenheit readout, 2.The controller is running Compressor Delay (PT) function to protect the cooling device. The default value is 3 minutes. If you want to run immediately and don’t need the PT function, you can set PT=0, 3. Temperature calibration function can calibrate the measuring temperature to the actual temperature, 4. When the temperature is lower or higher the setting temperature value, it will alarm by "BI-BI-BII" sounds. 5. The sensor probe is made of stainless steel, waterproof grade is IP 68. Probe diameter is 50 mm x 6 mm. The NTC sensor length is 2M/6.56FT, 6. The input power cable and the output power cable length are separate 5 feet and 1 feet. 7. The item is designed delicately and the socket on the top could be hanged on the wall, 8. It is accurate. Accuracy is Temperature Accuracy: ±1 degree F (-58 - 160 degree F). Package included: 1 x Inkbird 308s thermostat and 1 x male to female NTC sensor.

Manufacturer: Gerbing Brand: Gerbing's Heated Clothing Model: gerb-tcpbs Color: Black

* Dial in your level of comfort. * Digital controller insures that your heated clothing uses only as much power as requested. * Wires are UL listed and completely safe, in all weather conditions. * Attach this controller to any solid object with Velcro(c), or attach to your belt with our convenient, optional clip-on case.

Manufacturer: HONEYWELL Brand: Honeywell Color: Multicolored

' Manual Humidity Controller, Duct or Remote Mount Mounting, Differential 15 to 40 RH %, Voltage 24, Switch Action Open on Humidity Rise, Close on Fall, Switch Type SPST, Height 3 3/4 In, Width 5 1/4 In, Depth 2 3/8 In '

Manufacturer: Fluke Corporation Brand: Fluke Model: PM9082/001

One red (signal) and one black (ground) 4mm banana contact. Consists of two adapters. Maximum signal voltage: 600V rms. Maximum voltage to ground: 600V rms. CAT III per IEC 61010-031. UL Listed.

Manufacturer: Inkbird Tech Brand: Inkbird Model: IHC200S Color: Black

• It is an easy-to-use, safe and reliable dual relay output humidity controller. Its play-n-plug designed: Plug it into wall socket, set your controller's humidification or dehumidification values to your need. It can maintain the humidity between humidification and dehumidification automatically. In addition, the humidifier and dehumidifier can be programmed separately, too. • The maximum electrical load is 10A. It can fit many residential humidifier and dehumidifier. It is widely used for mushroom, mini greenhouse, ventilator fan, crawl space, turtle enclosure, curing chanmber, snake cage, tobacco cage and so on. Feature: Power Input: 100 ~240VAC, 50Hz/60Hz Power Output: Max. 10A, 100V ~240V AC Humidity Measuring Range : 5%-99.99%RH Humidity Control Range : 5%-99%RH Resolution: 1%RH Accuracy: ±3%RH Sensor model: AM-2301 Sensor stability:

Manufacturer: Fluke Corporation Brand: Fluke Model: PM9081/001

Dual banana plug 4mm male to female BNC adapter. Consists of two adapters. Maximum signal voltage: 300V rms. Maximum voltage to ground: 600V rms. CAT III per IEC 61010-031.

Manufacturer: Johnson Controls Brand: Johnson Controls Model: 881201

Johnson control # a19abc-24c electro-mechanical thermostat, -30 to 100 f, adj diff 3 to 12 f, convertible screw or knob adjustment, knob included. Ac full load 16 amp/120v, 9.2 amp/208v, 8 amp3240v, spdt, 3/8" x 4" copper bulb & plastic clamp, 8 ft cap, note: use copper conductors only. Replaces white rogers # 1609-102, - 101, -103 ranco # 010-1408, -1409, -1410, -1490, c30-c1100 honeywell # l6018c1006, l6021a1005, t675a1003, t675a1011, t675a1821, t4301a1008, t6031a1011.replaces the following manufacturer's productsoem numbers are used for reference only, see policies for more details. oem nameoem # johnson controls a19abc-24c

Manufacturer: Davis Instruments Brand: Davis Instruments

Upgraded outside temperature/humidity sensor for all of our Vantage Pro2 integrated sensor suites. The new sensor's temperature accuracy has increased to +/-0.5°F (+/-0.3°C) from +/-1.0°F (+/-0.5°C). Humidity accuracy has increased to +/-2% from +/-3% This upgraded sensor is available as replacement part for any complete Vantage Pro2 station, Vantage Pro2 ISS or Wireless Temperature/Humidity station manufactured Jan. 2016 (mfg. code AS) or later. Note: It is also possible to use with any Davis Vantage Pro2 ISS manufactured after January 2006 through 2015 (mfg code AR), however doing so will result in a reading which is 0.9°F too high. This error can be offset and corrected in the console as a calibration procedure (see page 26 of your console manual for calibration).