Temperature Controllers - Page 5

Manufacturer: Northern Brewer Brand: NorthernBrewer Color: Blue

The first dual-mode digital temperature controller to go from -50°F to 300°F-and back again-with the flip of a switch. Forget the Ready, its low-profile, ultra-mountable design is Set and Go. With a responsive dual-color LED display and modular probe that eliminates the need for a thermowell, perfect homebrew has never been so effortless. ThermoStar is the only temperature controller that you'll never need to disassemble or re-wire for perfect performance. Tested and trusted by our Brewmasters for its reliability and ease of use, ThermoStar is the temperature controller of choice in our R&D brew cave. No longer is an advanced degree in electrical engineering required to achieve flexibility in fermentation temperature control. With ThermoStarTM, switching from heating to cooling is not only easier than ever with the simple push of a button, it is instantly recognizable with an LED screen that displays the target temperature in blue when the unit is in cooling mode and red when it is in heating mode. You will never need to unscrew the unit to make changes or internal adjustments. A low-profile design outfitted with multiple mounting options-everything from magnetic to suction to nail hooks-ThermoStarTM delivers superb, reliable control even in the smallest of fermentation spaces. Upgrade the modular stainless steel probe to our longer 12" model and monitor the actual internal fermentation temperature of your wort without the need for a thermowell.

Manufacturer: Fluke Corporation Brand: Fluke Model: PM9092/001

The set consists of three black cables with colored BNC male connectors (red, gray and black) for easy identification. Cable length is 0.5m. Maximum signal voltage: 300V rms. Maximum voltage to ground: 600V rms. CAT III per IEC 61010-031. BB120 Shielded banana to BNC adapter is required to adapt to ScopeMeter 120 series shielded banana jack inputs.

Manufacturer: Fluke Corporation Brand: Fluke Model: L215

SureGrip kit with probe light and probe extender. L200 probe light. Tp280 20cm test probe extenders. TP220 SureGrip test probes. TL224 SureGrip silicon test lead set. Foldable soft pouch with six pockets and hook-and-loop.

Manufacturer: TitanOwl Brand: TitanOwl

Everything is ready to go, just switch on and connect the coil to heat up. Easy to connect to popular coils with DIN connector available in market. The range of temperature varies and depends on the type of coil, if you use K type it can go up to 1372C, with Cu50 Thermo Resistor up to 1500C. and with R coil up to 1768C, very easy to operate. Manufactured by TitanOwl

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 16B-53

The Dwyer Love Series 16B 1/16 DIN panel-mount temperature and process controller has two output controls and a four-digit, dual-line LED. This controller accepts input from DC voltage, DC current, thermocouple probes, or RTD probes for controlling and monitoring industrial processes or temperature applications. Its two output controls allow direct or reverse dual loop control. The four-digit dual-line LED presents the process value in red and the set point in green, and indicates output status, engineering scale, auto tuning, and alarm status. It includes on/off, proportional-integral-derivative (PID), self-tune, and manual tune control methods as well as two configurable alarms and 13 built-in alarm functions. It can output data to a PC or PLC (programmable logic controller) via the RS-485 interface for analysis and process integration.The panel is Ingress Protection certified IP56 for protection against dust and water jets, and it conforms to 1/16 DIN size for industry-standard mounting. The European Conformity (CE) marking indicates compliance with applicable European Union directives, and it is compliant with Restriction of Hazardous Substances (RoHS) standards.SpecificationsInput sensor typesThermocouple: K, J, T, E, N, R, S, B, L, U, TXK3-wire platinum RTD: Pt100, JPt100Analog: 0 to 5V, 0 to 10V, 0 to 20 mA, 0 to 50 mVInput voltage100 to 240VAC 50/60 Hz or 24VDC (depending on model)Operation voltage range85% to 110% of rated voltagePower consumption5VA max.Control outputRelay output: SPDT (SPST: 1/16 DIN and 1/32 DIN size), Max. load 250 VAC, 5 amp resistive loadVoltage pulse output: DC 14V, Max. output current 40 mA. Current output: DC 4 to 20 mA output (Load resistance: Max. 600Ω)Linear voltage output: 0 to 5V, 0 to 10VCommunicationRS-485Standards metCE, RoHS, UL, cULWaterproofingIP56Weight4 oz./114 gH is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Dwyer Instruments manufa...

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 16B-33

The Dwyer Love Series 16B 1/16 DIN panel-mount temperature and process controller has two output controls and a four-digit, dual-line LED. This controller accepts input from DC voltage, DC current, thermocouple probes, or RTD probes for controlling and monitoring industrial processes or temperature applications. Its two output controls allow direct or reverse dual loop control. The four-digit dual-line LED presents the process value in red and the set point in green, and indicates output status, engineering scale, auto tuning, and alarm status. It includes on/off, proportional-integral-derivative (PID), self-tune, and manual tune control methods as well as two configurable alarms and 13 built-in alarm functions. It can output data to a PC or PLC (programmable logic controller) via the RS-485 interface for analysis and process integration.The panel is Ingress Protection certified IP56 for protection against dust and water jets, and it conforms to 1/16 DIN size for industry-standard mounting. The European Conformity (CE) marking indicates compliance with applicable European Union directives, and it is compliant with Restriction of Hazardous Substances (RoHS) standards.SpecificationsInput sensor typesThermocouple: K, J, T, E, N, R, S, B, L, U, TXK3-wire platinum RTD: Pt100, JPt100Analog: 0 to 5V, 0 to 10V, 0 to 20 mA, 0 to 50 mVInput voltage100 to 240VAC 50/60 Hz or 24VDC (depending on model)Operation voltage range85% to 110% of rated voltagePower consumption5VA max.Control outputRelay output: SPDT (SPST: 1/16 DIN and 1/32 DIN size), Max. load 250 VAC, 5 amp resistive loadVoltage pulse output: DC 14V, Max. output current 40 mA. Current output: DC 4 to 20 mA output (Load resistance: Max. 600Ω)Linear voltage output: 0 to 5V, 0 to 10VCommunicationRS-485Standards metCE, RoHS, UL, cULWaterproofingIP56Weight4 oz./114 gH is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Dwyer Instruments manufa...

Manufacturer: Gerbing Brand: Gerbing's 12V Portable Single Temp Controller Model: TCPBS Color: Black

Gerbing's original 12V temperature controller is designed to control the heat of 1 article of clothing while riding. Easily adjust the temperature of your jacket liner or gloves with the turn of a knob. Gerbing's digital temp controllers draw just enough current to maintain the heat you need. Riders wanting to control both a jacket and gloves simultaneously will also need a splitter (item acsp). However, we highly recommend that you use a Dual Controller if you are thinking of wearing multiple heated items as you will save money in the long run. Use only with Gerbing 12V Products Dial in your level of comfort. Digital controller insures that your heated clothing uses only as much power as requested. Wires are UL listed and completely safe, in all weather conditions. Attach this controller to any solid object with Velcro®, or attach to your belt with an optional optional clip-on case.

Manufacturer: JOHNSON CONTROLS Brand: Johnson Controls Model: A419AEC-1C

' Electronic Temperature Control, Switch Type SPDT, Switch Action Open/Close on Rise, Number of Switches 1, Sensor Type A99, For Use With A99, Color Gray, LCD Display, Enclosure Type NEMA 4X, 120/240VAC, 120 to 240VAC, 15A, 10A, 10A, 16A, 8A, 96A, 48A, 125VA, DIN, 1, 1, 1, No '

Manufacturer: Titan Brand: Titan Model: 702605

Allows precise humidity control with a 20%-90% range. Change from 'humidification' to 'dehumidification' with a flip of a switch. Controls any 120 volt humidifier, dehumidifier or fan. Durable powder coated, steel enclosure will stand up to the toughest conditions. Grounded piggy-back cord is safe and easy to use. Ventilation louvers help avoid water accumulation and possible damage to the unit. Built in 4% split differential. 15 Amps/120 Volt/60 Hz. 3 year warranty.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 4B-23

The Series 4B 1/4 DIN Temperature/Process Controller is designed to accept thermocouple, RTD, current or voltage input and provide dual outputs for control. Available outputs include relay/relay, voltage pulse/relay, current/relay, or linear voltage/relay. The units can be programmed for ON/OFF, PID, auto-tuning, or manual tuning control methods. The PID control is supported by 64 ramp/soak actions. The Series 4B also includes two additional alarm outputs. The second relay output can be reconfigured as a third alarm output. The alarm type can be selected from 13 different preprogrammed alarm functions. The controller features dual LED displays for local indication of process and setpoint values.