4.2-5.5V AM2001 Single Humidity Sensor Voltage Analog Output Module
Brand: Industrial Parts
Supply voltage (Vin): DC 4.5-6V Current consumption: about 2mA (MAX 5mA) Operating temperature range: -40 ~ 80Â°C Operating humidity range: 0 ~ 100% RH (available condensation) Humidity measuring range: 0 ~ 100% RH Storage humidity range: 95% RH or less (non-condensing) humidity detection accuracy: Â±3% RH (Condition: at25Â°C, 60% RH, Vin = 4.5-6V) Output voltage range: 1.71 ~ 1.89V AM2001 single humidity module, the relative humidity sensor integrated circuit products. Supply voltage module is DC voltage, relative humidity calculated by the voltage output of the module with high accuracy, high reliability, consistency, and has been with temperature compensation, calibration microcontroller output, ensuring long-term stability, ease of use and low price and other characteristics, especially for the quality and cost requirements more demanding businesses. Features: Low power consumption, small size, full-range temperature compensation, calibration of linear output full-scale single-chip, high reliability, ease of use and low price. Application areas: Air conditioners, humidifiers, dehumidifiers, communication, atmospheric environmental monitoring, industrial process control, agriculture, measuring instruments and other applications. Package included: 1pcs AM2001 Single Humidity Sensor Voltage Analog Output Module
Mangood LED Indicate Salinity Meter Salty Check Food Salinometer Salt Tester Tools
Too much salt in human's diet will easily lead hypertension. Researches show over 10 grams of salt in human's daily diet has higher chances of causing hypertension. Human body should aim at taking less than 10 grams of salt daily. The salt analyzer uses conductivity test to measure the salt concentration in liquid food. Thus, the salt content can be derived to control the daily intake of salt and maintain health. The equipment features in touch pad control, seven red LED indicators, green LED power indicator, easy operation and simple use. It is good for your health care.
100% Brand New & High Quality.
Simple Mini portable design, easy to carry and operate.
Uses conductivity test to measure the salt concentration in liquid food.
Put the probe under the liquid surface by at least 2cm, the result will appear.
7 red LED for indicating salt concentrations: 0.3%~0.6% (moderate); 0.8%~1.0% (thick); 1.3%~2.0% (very thick).
One green LED power indication.
On push button: press the button to power on,then it is ready for measurement
When the measurement is completed, please use neutral detergent to clean the probe to avoid rusting.
Press the ON button,then it is ready for measurement.
Main Color: White.
Material: ABS, copper.
Size: approx. 21.5cm x 2.5cm x 1.6cm.
Range of temperature apply: 60Â°C~80Â°C
Formula: Salt content=Total quality & quantity x concentration
Powered By: 4 x LR44 button batteries (NOT Included)
Load current: MAX 20mA (all LED on)
Net Weight: 30g
Batteries are NOT included.
1x Salt Salinity Index LED Electronic Checker Analyzer Meter Tester (With Pack)
1X English manual
Waterlux 3-in-1 TDS, Temperature, and EC Meter with large LCD Screen
Do you want to know more about your water? Do you need a device that will quickly indicate precise measurements of your water's EC (Electric Conductivity), Temperature, and TDS (Total Dissolved Solids)? The Waterlux 3-in-1 Digital EC, Temp, and TDS Meter is the perfect tool for water quality testing, whether you need it for your pool, spa, hydroponics, aquaculture, scientific testing, or of course to test and measure your drinking water. With a large digital LCD display screen, automatic adjustment that compensates for water temperature, lock function, long battery life with an AUTO 5-minute shut off function, user friendly design, and stylish leather carrying/storage case, the Waterlux 3-in-1 Digital Water Tester is the ideal gadget for all your water testing needs. Ensure that your water is safe with our Waterlux 3-in-1 Digital Water Tester!
This meter is designed for measuring the moisture in lumber, bamboo, paper, medicine, and other wood fiber materials.InstructionThis meter is designed for measuring the moisture in lumber, bamboo, paper, medicine, and other wood fiber materials.Turn power on, the initial reading should be 00%Push the probe tip into the material to be measured about 5mm deep. The displayed reading is the moisture (in %) of the materialPush HOLD button to read measured reading, at this moment H sign is shown. Push the HOLD button again to cancelled HOLD function and continue the measurementAfter the measurement, turn off the power and put the probe protection cap backNotice:press and hold the on-off button for 2 seconds to turn it on .Specifications:Product Name : Moisture MeterMaterial : Plastic, Electronic PartsMain Color : Red, BlackSize : 150 x 70 x 30mm / 6 x 2.8 x 1.2inches (L*W*T)Net Weight : 229g (8.1oz)Display : Digital LCD Display; Resolution : 1%Range : 5%-40%Working Temperature : 32F-104F (0C-40C)Working Humility : 0-70%RHBattery Type : 1 x 9V Battery(included here)Package includes:1 x MositureMeter1 x English Operation Manual1 x Pouch Bag
eLanderTM 3-in-1 Soil Meter Test your soil's comprehensive status!
2. PH (Potential Of Hydrogen)
Promotes Healthy Plants
Help you know your soil more clear and care your plants more rational.
*Let you know when to water. Dry and needs water or wet and could use a day to dry out. You will never over/under water your plants again
*Help you to control Ph level in soil, acidic or alkaline is suitable for your plants You will never plant your lovely flowers into high-acid or Extreme alkalinity soil
*Help you to determine if plant getting adequate light
Easy To Use
*Inset the probe of the meter to the plants; roots
*Note moisture/pH/light level in the dial
*Remove probe from soil and wipe clean after each use
1. Without touching the stone, don't too hard, easy to damage the probe
2. After using, need to clean and wipe the probe (can't test the water)
3. Don't inserted in the soil for a long time for using
1. Easy to read
2. No batteries needed
3. Indoor/outdoor use
4. Color coded reading system
5. For all plants
2 x eLander 3-in-1 Soil Meter
got kawasaki? L.A.T Misses Cut Women's T-Shirt, Red, Large
Brand: Shirt Me Up
You are looking at a brand new custom printed shirt! Our shirts are printed using the latest DTG (Direct to Garment) technology. This is not an iron-on or a cheaply printed image, but the best quality print you'll find anywhere! All of our items are individually custom printed to ensure that you receive the best quality product possible. Be sure to check the size chart before purchasing!
CHICHO EU Plug Power Energy Meter 230V 50Hz LCD Digital Display Wattage Voltage Current Frequency Monitor Analyzer Power Factor Cost Overload Protection
Features:LCD digital display for the values of the readings, time and costs.Basic functions: clock ,voltage, current, power factor, operate time, power consumption display, overload alarm settings, price setting, automatic calculation of electricity.So many display modes, transferred easily by pressing "DISPLAY".Overload warning displayed on LCD screen when the appliance exceeds the setting value.Resetting for abnormal display.Easy electricity price setting, good for energy-efficient living.Specifications:ColorÂ£ÂºWhiteMaterial: ABSOperating Voltage: 230V 50HzMax Operating Current: 16AÂ Min Operating Current: 0.005AVoltage Range: 190V to 270VDuration of Indication: 0 second to 9,999 hours 59 minutesPower Range: 1W to 3680WCurrent Range: 0.01A to 19.999AFrequency Display: 0Hz to 9999HzResolution: 0.5WIndication of Frequency: 46Hz to 65HzMeasurement of Consumption: 0.00KWH to 9999.99/KWHProduct size: 23.5 * 6.5 * 8.5cm / 9.25 * 2.56 * 3.35in (L * W * H)Product weight: 174g / 6.13ozPackage size: 14 * 8.8 * 7.2cm / 5.51 * 3.46 * 2.83in (L * W * H)Package weight: 223g / 7.88ozPackage including:1 * Power Meter1 * User Manual(English)
(3) ea Hydrofarm HGTLCRV Thirsty Light Curve Digital Plant Moisture Sensor Thirsty Light Curve, Digital Plant Moisture Sensor That Blinks An LED To Alert The User When It Is Time To Water A Potted Plant, Designed To Be Unobtrusive When Left In The Soil Of A Plant, Where It Continuously Monitors Conditions, Testing The Moisture Level Once Per Second, Can Sense 5 Different Levels Of Dryness, Causing The Light To Blink Faster As The Soil Gets Dryer, Increasing The Urgency Of Its Call To Action, When It Reaches The Fifth Level, Completely Dry, The Device Goes Into Standby Mode To Conserve Electricity, Emitting A Double Blink Every 3 Seconds, Low Battery Mode Is A Slow Triple Blink, Angled Probe For Hanging Plants, Comes With A Comprehensive & Informative User & Watering Guide.
Digital Humidity and Temperature Meter, Portable Thermometer Hygrometer monitor Hand-held LCD Backlight with Tripod thread, Show excess power, the Current Measurement Hold for Indoor and Outdoor
Color: TK Humidity meter
Widely Applications : It is widely applied in industry, agriculture, meteorology and daily life etc, used to measure temperature and humidity. In living and office area, machine room, data storeroom, traffic environment, timely knowing the temperature and humidity, playing an important role in building a healthy life. We also need to know plants' living condition, when planting flowers and trees. Easy Operation Usually you can operate it don't need manual. There is a English manual for You. Multifunctional "â„ƒ/â„‰/RH%" button You can select humidity or temperature display at a LCD screen. You can also switch easily between Celsius and Fahrenheit when the screen show the temperature. Specification: Temperature range: -10 - 50â„ƒ Humidity range: 10% - 99% Measuring rate: 2 times a second Temperature accuracy: Â±1.0â„ƒ Humidity accuracy: Â±3% (in 25â„ƒ, 30~99%RH), Â±5% (in 25â„ƒ, 10~30%RH) Temperature resolution: 0.1â„ƒ/â„‰ Humidity resolution: 0.1% Store temperature: -10â„ƒ - 60â„ƒ Store humidity: ï¼œ70% Temperature operation conditions: -0â„ƒ - 40â„ƒ Humidity operation conditions: ï¼œ99% Auto power off without operation: 10 minutes Package : 1xDigital temperature & humidity level meter 1x9V battery 1xEnglish user manual Warm Prompt : 1. Don't operate the unit at high temperature and humidity environment. 2. Single-line display design, the unit will display current temperature firstly, "â„ƒ/â„‰/RH%" button can change to humidity reading, or switch temperature unit (â„ƒ or â„‰). 3. When using the unit in the presence of wind, a windscreen must be used to avoid undesired signals. Warranty: We would like to replace a faulty product or refund your purchase. If you have any problem, please contact with us. We always would like to serve you.