Moisture Meters - Page 4

Manufacturer: Extech Brand: Extech Model: MO290-BP

science-lab-supplies

Manufacturer: KKmoon Brand: KKmoon

The meter for PPM HTV directly measures airborne formaldehyde concentrations as well as ambient temperature. It's widely used in the following application scenarios:   ●Building materials and indoor air quality detection.    ●Environment and Public Health inspection.   ●Estate and property management.   ●Industrial production process of formaldehyde detection, such as paint and paper manufacture.    ●Hospitals, pharmaceutical and clinic formaldehyde detection.    ●Tracing the formaldehyde release source in the environment.    ●To assess the efficiency of hvac system.    ●To assess the efficiency of formaldehyde scavenger.  With further importance being put on air quality in public buildings, the workplace and in homes, the formaldehyde tester is aimed towards being the most accurate meter while still providing quick and simple operation  from a hand-held device.Specification: Measurement range: 0～5PPM Sampling Frequency: 1s Response Time(T90): T90＜60s Formaldehyde Sensor： Range: 0～5ppm as standard (0～6.7 mg/m3 at 25℃) Resolution: 0.001ppm Accuracy: ≤0.1ppm：±20%       ＞0.1ppm: ±10% Resolution: 0.1℃ Accuracy: ±1.5℃             Alarm Mode: sound alarm, light alarm, vibration alarm                 Alarm: Low concentration 0.1PPM alarm yellow light flashing    High concentration 0.3PPM alarm red light flashing(alarm concentration can also be set up)                   Battery Type: 3 * AAA 1.5V Alkaline Batteries (NOT Included)

Manufacturer: Testo AG Brand: Testo Model: 0560 6053

Testo thermohygrometer with duct holder. Rugged humidity stick providing fast and accurate humidity, temperature wet bulb and dewpoint readings. Dewpoint calculation from -4 to 122 degree F. Testo's exclusive long-term, stable humidity sensor. Ideal for measurements in ducts. Easily read data from any angle with rotating display. Air moisture, air temperature and dewpoint. Storage temperature: -4 to 158 degree F. Battery type: 3 AAA batteries. Battery life: Approximately 1000 hours. Weight 2.7 oz. Measures 7" length by 1.5" width by 1.4" height. Probe type NTC. Measurement range 32 to 122 degree F. Accuracy: +/- 0.5 degree F. Resolution: 1.8 degree F. Probe type humidity sensor, cap. Measuring range 5 to 95 percent RH. Accuracy: +/- 3 percent RH. Resolution: 0.1 percent RH.

Manufacturer: M&A INSTRUMENTS INC Brand: M&A INSTRUMENTS INC Model: MC7825G

Application: Used for fast and accurate measurement of moisture in the process of allotment, acquisition, storage, machining of packed grains, feedstuff, powder. Features: * Able to measure grains up to 36 species. * Two presentations, digital display and color coded LED indication. * Use the exclusive Micro-computer LSI circuit and crystal time base to offer high accuracy measurement. It can obtain automatically the temperature corrected moisture value. * Use "USB data output" and "RS-232 data output" to connect with PC. * Provide "Bluetooth TM data output" choice. Specifications: *Grains:36 Species *Measuring Range:6~30 % *Accuracy:Moisture: ±(0.5%n+1) *Resolution: 0.1 * Display: 4 Digits, 10 mm LCD, With Color Coded LED Indicator 1. Green LED represents a safe, air-dry state 2. Yellow LED represents a borderline state 3. Red LED represents a damp state *Calibration:Automation *Battery Indicator:Low Battery Indicator *Data Output:USB, RS-232, Bluetooth *Operating Conditions:Temperature: 0~50 %°C, Humidity: < 90 %RH *Power Supply:4 x 1.5 AAA Size (UM-4) Battery * Dimensions:Unit:165 x 62 x 26 mm; Sensor: 368 x 44 x 25 mm *Weight:334 g (Not Including Batteries) Standard Accessories: 1. Main Unit 2. Probe 3. Carrying Case 4. Operation Manual Optional accessories: 1. USB, RS-232C data cable with software 2. Bluetooth data out put with software

Manufacturer: UEi Test Instruments Brand: UEi Test Instruments Model: DL379B Color: Multicolored

The new DL379B offers two upgrades to our flagship clamp meter. We've added a dual NCV indicator which alerts to low voltage up to 24V and indicates high voltage above 24V. The DL379B is now rated CAT IV 300V/CAT III 600V instead of the previous CAT III 600V/CAT II 1000V, safely expanding its testing environment.

Manufacturer: Reed Brand: Reed Instruments Model: R6015

This wood moisture detector uses the electrical resistance principle to measure wood moisture of approximately 170 different species of wood. The R6015 features an automatic temperature compensation (ATC) probe for increased accuracy and includes a remote hand-press for flexibility in the field.

Manufacturer: Ruby Electronics Brand: Ruby Electronics Model: CEM Color: Dark Gray & Yellow

This is a brand new DT-129 industrial grade wide range digital wood moisture meter from Ruby Electronics. DT-129 is a conductivity moisture instrument designed for use in wood. This meter has a measurement range of 6 - 99%. It is ideal for the lumber yard, furniture factory and your wood project where the wood moisture monitoring is important. This device is compact and very portable. It comes with a remote probe and a temperature probe. A heavy duty carrying pouch is also included for the protection of the device and your convenience.

Manufacturer: Delmhorst Instrument Brand: Delmhorst Instrument Model: 26-ES

DELMHORST INSTRUMENT Slide Hammer with 2

Manufacturer: Delmhorst Instrument Co. Brand: Delmhorst Instrument Co. Model: GB-1

Manufacturer: HydroShark Brand: HydroShark

The best moisture detector 30 in. polished stainless steel construction welded handle with rubber grip heat treated probe pins-only the best. The 9 volt battery lasts about a year depending on usage and is replaceable. It is so sensitive it will detect moisture on your fingers even though your fingers do not feel damp.Features. 30 inches long.. Light flashes and beep sounds when moisture detected.. Dimension - 5 x 2 x 1 in.. Item weight - 1 lbs.