Temperature & Humidity - Page 125

Manufacturer: Fluke Brand: Fluke Model: 5611A-11-S

Secondary Reference Silicone Bead Thermistor Probe, Gold Pins The Fluke Calibration 5611A-11-S Secondary Reference Thermistor probes have the stability necessary for use as high-accuracy thermometry standards. The thermistors are available in a variety of sheath materials appropriate for your specific application. The 5611A 11 G has gold pins for its connector tips. The Fluke Calibration secondary reference thermistor has a small 0.06 inch diameter with a 1 inch probe tip length and very small sensing elements, which means they require far less immersion than a PRT to avoid errors caused by stem effect. Self heating is usually negligible, giving them an advantage when taking measurements in air. Its small size also improves response time, allowing measurements to be taken more quickly. If your application involves frequent handling, you'll be especially interested to know thermistors are less susceptible to mechanical shock than PRTs. The bottom line may be better accuracy in fieldwork. If you're looking for economical lab-grade thermistor probes for accurate work across a narrow temperature range, Fluke Calibration 5611A11G Secondary Reference thermistor probes are the best you can buy. Teflon construction The 5611T Teflon Probe's unique construction makes it an especially versatile thermistor. With a tip that is just 3 mm (0.120 in) in diameter and a Teflon coating that makes it impervious to most liquids, the Teflon Probe is handy for measuring in a wide variety of applications, including bio-pharmaceuticals. It's even immersible to nearly 6 meters (20 ft) and flexible enough that you could roll it up into a ball in your hand if you wanted to! The 5611T's thermistor bead is encapsulated in a mylar sleeve that is encapsulated inside a Teflon sleeve. The Teflon sleeve is melted around the Teflon-insulated cable, forming a moistureproof seal

Manufacturer: Fluke Brand: Fluke

Fluke 1587 FC Insulation Multimeter   FLUKE CONNECT COMPATIBLE Download the free Fluke Connect ® app from iTunes or Google Play to enable graphs within the Pi/DAR function, memory storage, and temperature compensation. DISPLAY Large, 6000-count back-lit display. VFD Low-pass filter for accurate motor drive measurements. INSULATION TEST VOLTAGES 1587 FC: 50 V, 100 V, 250 V, 500 V, 1000 V 1577: 500 V, 1000 V WARRANTY Three-year standard warranty; extendable to five-years through product registration within 45 days of purchase* See it. Save it. Share it. All the facts, right in the field. Fluke Connect ® with ShareLiveTM video call is the only wireless measurement system that lets you stay in contact with your entire team without leaving the field*. The Fluke Connect mobile app is available for iPhone models 4S and up running iOS 8.0 or higher, iPad Air and iPad Mini (2nd generation) in an iPhone frame on iPad and iPod Touch (5th generation) HTC One and One M8 running Android 4.4.x or higher LG G3 and Nexus 5 running Android 4.4.x or higher Samsung Galaxy S4 running Android 4.3.x or higher Samsung Galaxy S5 running Android 4.4.x or higher and works with over 20 different Fluke products-the largest system of connected test tools in the world. And more are on the way. Go to the Fluke website to find out more. *Within provider's wireless service area. Download the app at:   The High-Performance 2-in-1 Insulation DMM   The Fluke 1587 FC and 1577 Insulation Multimeters combine a digital insulation tester with a full-featured, true-rms digital multimeter in a single compact, handheld unit, which provides maximum versatility for both troubleshooting and preventative maintenance

Manufacturer: Dwyer Brand: Dwyer

.da-1-4 { width: 23%; } .da-img { max-width: 100%; height: auto; margin: auto; } .da-ProdBody{ padding: 2%; margin: 0 auto; } .cr-list { list-style-image: url(/assets/1/7/850c3d3a3b4b40e68a2a2327508d61531.png); } .da-sm-img{ box-shadow: 1px 2px 3px #eeeeee; border-radius: 5px; } .da-sm-img:hover{ box-shadow: 1px 1px 2px 1px #aaa; transition: all 0.5s ease-in-out; } .da-overlay { position: fixed; top: 0; bottom: 0; left: 0; right: 0; background: rgba(0, 0, 0, 0.7); transition: opacity 50ms; visibility: hidden; opacity: 0; z-index: 1000; } .da-overlay:target { visibility: visible; opacity: 1; } .da-popup-img { margin: 70px auto; padding: 20px; background: #fff; border-radius: 5px; width: 50%; position: relative; transition: all 0.5s ease-in-out; max-width: 800px; } .da-popup-img h2 { margin-top: 0; color: #333; font-size:14px; } .da-popup-img .da-close { position: absolute; top: 0px; right: 10px; transition: none; font-size: 30px; font-weight: bold; text-decoration: none; color: #333; } .da-popup-img .da-close:hover { color: #888888; } .da-popup-img .da-content { max-height: 30%; overflow: auto; } .cr-stdwrp li {height: 38px; background: url('https://assets.tequipment.net/assets/1/7/RedCheckMark.png') no-repeat left top; background-size: 36px 36px; padding: 3px 0px 3px 40px; /* reset styles (optional): */ list-style: none; font-size: 20px; } .da-light{font-weight:300}.da-img{max-width:100%;height:auto}

Manufacturer: Fluke Brand: Fluke Model: 5610-6-G

Secondary Reference Thermistor Stainless Steel Probe, 6-inch, Gold Pins The Fluke Calibration 5610-6-G Secondary Reference Thermistor probes have the stability necessary for use as high-accuracy thermometry standards. The thermistors are available in a variety of sheath materials appropriate for your specific application. The 5610 6 G has gold pins for its connector tips. The Fluke Calibration secondary reference thermistor has a small 0.125 inch diameter with a 6 inch probe tip length and very small sensing elements, which means they require far less immersion than a PRT to avoid errors caused by stem effect. Self heating is usually negligible, giving them an advantage when taking measurements in air. Its small size also improves response time, allowing measurements to be taken more quickly. If your application involves frequent handling, you'll be especially interested to know thermistors are less susceptible to mechanical shock than PRTs. The bottom line may be better accuracy in fieldwork. If you're looking for economical lab-grade thermistor probes for accurate work across a narrow temperature range, Fluke Calibration 56106G Secondary Reference thermistor probes are the best you can buy.

Manufacturer: HT Instruments Brand: HT Instruments Model: T2000

HT Instruments T2000 Earth Ground Clamp Meter The T2000 model is designed for the resistance measurement on earth probes with ground loop method without the disconnection of parts of plants under test. This type of measurement carried out by the instrument can be used for evaluation of single rods' resistances within an earth installation assuming they do not affect each other. The inner part of the instrument is made of 2 jaws one for current and one for voltage. The voltage jaw generates a potential (E) on the loop during resistance measurement. A current (I) is consequently generated on the loop and is measured by the current jaw. Based on the value of parameters E and I the instrument displays the resistance value R calculated as their ratio. The T2000 also performs AC current up to 20A and leakage current with 0.05mA resolution and the setting of alarm thresholds on measurements is possible. The instrument is in compliance with IEC/EN61010-1, CAT III 150V and is ideal to carry out easily measurements both in domestic and industrial environments.

Manufacturer: Fluke Brand: Fluke

.da-ilf-gsep{ background-color: #ffc70a; } .da-ilf-gsep h3{ color: #f6f7e5 !important; }

Manufacturer: Fluke Brand: Fluke Model: 5609-20-G

Fluke 5609-20-G Probe, Secondary PRT, 100 OHM (1/4 X 20 INCH). If you want a very stable thermometer from -200 °C to 670 °C and are particular about the calibration, then look no further than our 5609 Secondary Reference PRT. Its short-term stability at the triple point of water is only ± 7 mK and its one-quarter inch (6.23mm) diameter lets you get accurate measurements in only 100 mm of immersion. The 5608 is also a ± 7 mK probe at the triple point of water, but its one-eighth inch (3.18 mm) diameter gets you accurate measurements from -200 °C to 500 °C with only 80mm (3.1 in) of immersion. With multiple sheath length options on both of these probes, you can find the dimensions that are just right for your specific application. The 5608 comes with a one-eighth inch (3.18 mm) diameter sheath in lengths of 9 inches or 12 inches. The 5609 comes with a one-quarter inch (6.35 mm) diameter sheath in lengths of 12 inches, 15 inches, and 20 inches; or with a 6 mm diameter in lengths of 300 mm, 400 mm, or 500 mm. When looking for improved response time and reduced stem effect in shallow immersion, look for small diameter probes, because the measurement error called stem effect is caused by the diameter of the stem rather than the length of the stem. Both of these probes have InconelTM sheaths and are made using a special manufacturing process, giving them great precision over a wide temperature range. The sensors for these probes are reference-grade platinum and feature four-wire connections with less noisy measurements than two-wire counterparts. These probes come with a certificate of compliance to ensure the meet their specifications. If you'd like, you can also order a NVLAP-accredited calibration from our laboratory, lab code 200348-0. On the report of calibration, you'll get the test data and the ITS90 calibration coefficients that you can easily input into any Fluke Calibration thermometer

Manufacturer: CEM Brand: CEM Model: DT-980

Thermal cameras are designed to enhance the electrical, mechanical and building diagnostics of users across key industries and professions. The DT-980 model has the following features: *2% accuracy with temperature range from -20°C to +150°C (-4°F to 302°F) *Display 2.8" LCD, 240 x 320; *Swappable Li-ion Battery with 4 hour life *2% accuracy *8GB storage SD *JPG storage format *Onboard digital camera 5MB

Manufacturer: Fluke Brand: Fluke Model: 5618B-6-S

With each probe you will receive a full NVLAP-accredited calibration report. On the report you'll get the test data and the ITS-90 calibration coefficients that you can easily input into your Fluke Calibration thermometer. The 5618B is also a great probe to use for calibrating your Fluke Calibration 9132 or 9133 infrared calibrators. In fact, these IR black body heat sources were designed to be calibrated with this type of probe. Now you can calibrate these targets in your own lab! For use from -200 °C to 500 °C (the six-inch model goes to 300 °C), you won't find a better industrial standard in this configuration than our 5618B. We recommend using the 5618B PRTs with the 1523, 1524, 1502A, 1529, or 1560 thermometer readouts.

Manufacturer: Iris Brand: IRIS USA, Inc.

.da-ilf-gsep{ background-color: #000000; } .da-ilf-gsep h3{ color: #5798c9 !important; }