Temperature & Humidity - Page 186

Manufacturer: Fluke Corporation Brand: Fluke Model: TP82

Flexible and formable 1-1/4" pin provides an easy connection past weather pack seals to connector conductors. Tested to over 60 VDC, these pins are a must-have for fuel injectors, TPS and MAP sensors, as well as for any underhood or under vehicle connector with weather pack seals. The bright yellow body stands out in an engine compartment to ensure they are not left behind. Easily connects to test leads that have removable ends. Banana jack accepts all DMM and banana jack leads.

Manufacturer: Tempco Brand: Tempco

General Purpose Thermocouple, Type K, Temp Limit 2100 Deg F, Probe Length 12 In, Sheath Size 0.188 In, Material 600 Inconel, Max Pressure 1000 PSI, Magnesium Oxide Insulation, 20 AWG Type K Thermocouple Element, Error Accuracy +/- 0.75 %, Metal Insulated Cable Construction, Bendable 3/16 In Diameter Sheath With Plug And Jack Connectors, Optional Adjustable Compression Fitting For Mounting Thermocouples, RTDs, Lead Wire, and AccessoriesThermocouplesBendable, Mineral InsulatedPlug and jack connectors allow probe to measure temperature in hard-to-reach areas.

Manufacturer: Fluke Corporation Brand: Fluke Model: TP81

Stainless steel probe pierces insulation on 14, 16 and 18 gauge wire. You control needle depth to minimize insulation damage. Essential for use under hood or under dash. Use it on fuel injectors or sensors while providing complete insulation to grounding due to design. The TP81 connects to banana jack leads. Banana jack accepts all DMM and banana jack leads. Non-rotating banana jack prevents leads from tangling, allowing you to tighten/loosen clamp while still connected to the test lead. For use with test leads with 4mm banana plugs. Tested to 60V DC.

Manufacturer: Hammond Brand: Hammond

This item is new, including original packaging!

Manufacturer: COLE-PARMER Brand: Digi-Sense

Note: the temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C). Warning: This product is not approved or intended for, and should not be used for medical, clinical, surgical or other patient oriented applications. General-Purpose Penetration Probes Are Designed For Soft and Semi-Soft Materials Response Time: 2 seconds or greater. ABS handles provide a light weight design for ease of use along with durability. Probe handles feature a strain relief spring that protects the cable connection against damage due to repeated flexing and tugging. Each probe comes with color coded ANSI miniconnectors: type J-black, type K-yellow, and type T-blue. Custom designs or changes to this product are available upon request

Manufacturer: COLE-PARMER Brand: Digi-Sense

Note: the temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C). Thermocouple Pipe-Fitting Probes Ideal for High Temperature Environments or Pressurized Chambers Each Probe comes with a one-time adjustable stainless steel compression fitting with a 1/8" NPT process. Compression fittings can hold up to 2000psi once installed Response Time: 3 seconds or greater Fiberglass insulated cable ideal for continuous high temperature environments Type "K" and "J" probes feature ICONEL 600 sheaths Type "T" probes feature 316 Stainless Steel sheaths Each probe comes with a color coded ANSI mini connector: type J-black, type K-yellow, type T-blue, and type E-purple. Custom designs or changes to this product are available upon request

Manufacturer: Getza Brand: Getza

Knob Controls Ignition & Gas Control Specified to work with Standard Propane Tanks Outer finish specially coated for durability and strength Electronic lighter Hose and Regulator are included Approx. dimensions 4 x 13 1/2 x 23 Hose length: approx. 6ft Rubber Hose Dia: 0.6" Overall Length: 21.5"

Manufacturer: COLE-PARMER Brand: Extech

Measure surface temperature of objects which are difficult to reach or unsafe to contact InfraRed thermometer with adjustable emissivity and high alarm Wide temperature range: -4°F to 518°F (-20° to 270°C). 6:1 filed of view; °F/°C switchable. Economical small pocket size design for convenience. Built-in laser pointer for easy targeting. Adjustable emissivity for better accuracy on different surfaces. Lock mode for continuous scanning. Data Hold and Max Hold, Auto power off

Manufacturer: Raytek Brand: Raytek Model: MT4

The Raytek Mini Temp Non-Contact Thermometer Gun with Laser Sighting has a temperature range of 0 to 750 degrees F (-18 to 400 Degrees C), a backlit display, laser targeting distance-to-spot: 8:1, selectable degrees C or F, The Raytek MT4 is small and compact, non-contact with 98 percent accuracy data hold feature. Uses 9V Battery.

Manufacturer: Thermco Products Inc. Brand: THERMCO Model: ACCTR

This polypropylene rack holds up to 25 thermometers in a safe vertical position to avoid damage while drying. Hole diameters in the top and middle plates are 7.9mm (5/16") while the bottom plate has only. 3.2mm (1/8") diameter drain holes.