Temperature & Humidity - Page 196

Manufacturer: Palmer Instruments Brand: Palmer Model: 3AP60/250F&C

Palmer All Pro Bimetal thermometers are an economical temperature solution for a variety of applications. Balancing economy and performance, this All Pro model is made of all welded 304SS to resist corrosive working environments. Case is hermetically sealed. Easy reading, 3" (76 mm) dial face is specially fabricated from low-glare finish metal, using a deep draw design for anti-parallax alignment of high visibility tapered black pointer with the scale graduation marks. This model is dual scale: 0 to 250°F Scale has 2° divisions, and -20 to 120°C Scale has 1° divisions. 6" (63.5 mm) stem. Accuracy: 1% of Full Range. One year limited warranty covers defects in materials and workmanship.

Brand: Ranco

Digital Display •Unlike many electronic controls, the ETC is simple to install and set up. One finger is all you need to program it. The standard digital display and keypad allow the user to adjust the temperature settings with 1 degree resolution. Setpoint temperature, differential and mode of operation (heating or cooling) can all be selected using the keypad and display. When not in the programming mode, the display gives a constant readout of the sensor temperature. Annunciators on the liquid crystal display also indicate when the relay is energized. Remote Temperature Sensing •The ETC is capable of remote temperature sensing up to 400 feet away from the control when using standard 22 gauge sensor wire. Built-In Safety •Every ETC model is equipped with diagnostic programs that check for hardware, software, or system problems and display different error codes to indicate where the trouble is. The ETC also has a keyword lockout switch to prevent tampering with the control settings by unauthorized personnel. The switch, which is located inside the enclosure, can be used to disable the keypad function. Specifications •Temperature Setpoint Range: 30 to 220 Degrees F •Differential Range: 1 to 30 Degrees F •Input Power Requirements: 24 VAC •Sensor: Thermistor, 2" long x 1/4" Diameter, with 8' cable •Control Ambient Temperatures: Operating (20-140), Storage (40-176) •Ambient Humidity: 0 to 95% RH, non-condensing •Enclosure: NEMA 1 •Dimensions: 6.52" high x 2.7" wide x 2.48" deep •Agency Approvals: UL Listed, CSA Certified •Switch Action: SPDT

Manufacturer: ZIBOO Brand: ZIBOO

Model UT302C Specifications: Temperature Range:-32°C～650°C (-26°F～1202°F) Accuracy:±1.8°C or ±1.8% Repeatability:±0.5°C or ±0.5% Resolution:0.1°C/0.1°F Distance to Spot Size: 20：1 Response Time: 250mS(95% of reading) Emissivity: 0.10～1.0 Adjustable Laser Type: Class 2(Ⅱ) Laser Power: ＜1mW Laser Wavelength: 630nm ～670nm Spectral Response: 8μm～14μm General Characteristic Power: 9V Battery（6F22) LCD Size: 32mm X 29mm Product Color: Red and Grey Product Net Weight: 322g Product Size: 169mm X 138mm X 53mm What's in the box: 1* UT302C Infrared IR Professional Thermometer 1* Blister, 1* English Manual 1* Carrying Bag

Manufacturer: FEDERAL Brand: Federal Model: FED41-13755

SPECIFICATIONS Height (Inches): 0.24 Width (Inches): 0.1 Length (Inches): 51.0 Weight (Lbs): 0.3 Haz Material: No Freight: No Returnable: Yes

Manufacturer: BAPI Brand: BAPI

Rigid Averaging Temperature Sensor, 12" Probe, 10K Type II Ohms @ 77 Deg F (25 Deg C) Thermistor, IP66 & NEMA 4 Rated Housing

Manufacturer: CARLO GAVAZZI Brand: CARLO GAVAZZI

CARLO GAVAZZI IA08BSN25PO IND PROX SS M8 DC PNP NO CABLE

Manufacturer: Thermco Brand: THERMCO

-35 TO 365C & F, RES. 8:1, LAZER SIGHTING, MAX FUNCTION

Manufacturer: Fluke Corporation Brand: Fluke Model: Fluke 323 Color: Multicolored

The Fluke true-rms clamp meter is a great clamp meter for general, grab-and-go troubleshooting needs. The Fluke 323 323-AMZN is ideally suited for current measurements up to 400 a in tight cable compartments.

Manufacturer: COLE-PARMER Brand: Digi-Sense

To match your probe to a thermowell, first measure the distance from the probe's tip to the top of the thread (typical thread length is 0.5" for 1/2" NPT fittings). Next, match this length to the probe depth of the thermowell ("A" dimension). Other thermowell sizes and materials are available-call our Application Specialists for more information. Limited-Space Thermowell when you need a shorter insertion depth. Standard Thermowell for general-purpose applications. Heavy-Duty Thermowell for higher fluid velocity ratings. Designed for easy replacement of your industrial probe without shutting the operation down.

Manufacturer: REOTEMP Brand: Outdoor Sport

The REOTEMP Moisture Meter (MM17) measures the moisture content of your soil or compost pile by means of a sensor at the bottom of the probe. While composting or gardening you often may wonder: How wet's your soil?TM Now you will know and be able to more efficiently compost, garden or simply know if your plants need more water. The 0 to 10 scale of the MM17 indicates a relative wetter or dryer. Note: the probe will not display a percent moisture. The probe is sensitive only at the tip. Calibration instructions are conveniently printed on the side of the meter head and included on the back of the box. The MM17 has a 1-year limited warranty.