Temperature & Humidity - Page 205

Manufacturer: Iris Brand: IRIS USA, Inc.

.da-ilf-gsep{ background-color: #000000; } .da-ilf-gsep h3{ color: #5798c9 !important; }

Manufacturer: HT Instruments Brand: HT Instruments

Accessory for meters connection to external CT's The HT903 accessory was designed for connection with multipurpose meters like GSC5x, HT9032, HT202E on three-phase systems through external fixed CTs for high current measurements over 3000 Amps. The HT903 is housed in a wooden box, it receives signals from the CTs secondary with 1A or 5A ratio on its input terminals and transforms it, with linear relationship, in a 1V AC output signal to an analyzer inputs. The HT903 is supplied with a set of cables for connection to CTs and meters/analyzers according to EN61010-1 standard on CAT II 300V.     INSTRUMENT DESCRIPTION   LEGEND: Transducer inputs: Full Scale 1A Transducer inputs: Full Scale 5A Transducer Output: Full scale 1V

Manufacturer: Fluke Brand: Fluke Model: 5615-6-S

Fluke 5615-6-S Probe, Secondary PRT, 100 OHM (3/16 X 6 INCH). The 5615-12 is a Platinum Resistance Thermometer (PRT) with an InconelTM 600 sheath that's 305 mm (12 in) long and 6.35 mm (0.250 in) in diameter. It is a secondary reference temperature standard designed to bridge the gap between the highest laboratory standards and industrial or second-tier lab locations. It has accuracy of ± 0.012 °C at 0.01 °C. The element is constructed of reference-grade platinum wire (99.999 % pure) for excellent stability. The wire is wound in a coil and placed in a mandrel where it's uniformly supported in a manner that virtually eliminates hysteresis. The electrical configuration is a four-wire current-potential hookup that eliminate the effects of lead-wire resistance. These InconelTM-sheathed probes have a fully supported sensing element, making them more durable than SPRTs. The element is protected in an ultrahigh-purity ceramic case with a hermetic glass seal to improve output stability by locking out moisture and contaminants. This probe comes calibrated with ITS-90 coefficients, making it compatible with many excellent readout devices, including Fluke Calibration's 1529 Chub-E4, 1560 Black Stack, and 1502A Tweener. It bridges the gap between a 100-ohm industrial RTD and an SPRT. For those needing faster thermal response, or where diameter and immersion depth are problems, order the 5615-9 or 5615-6. These probes are excellent reference probes for comparison calibrations in a Fluke Calibration dry-well. The sheaths of the 5615-6 and 5615-9 are 4.76 mm (0.188 in) in diameter. A printout of sensor resistance is provided in 1 °C increments for each probe. The 5615-9 and 5615-12 are calibrated from -196 °C to 420 °C. The 5615-6 is calibrated to 300 °C. We've tested many of the probes on the market. We've used them in our manufacturing facility and tested them in the lab, and this is an excellent secondary standards PRT

Manufacturer: Fluke Brand: Fluke Model: 5618B-9-G

With each probe you will receive a full NVLAP-accredited calibration report. On the report you'll get the test data and the ITS-90 calibration coefficients that you can easily input into your Fluke Calibration thermometer. The 5618B is also a great probe to use for calibrating your Fluke Calibration 9132 or 9133 infrared calibrators. In fact, these IR black body heat sources were designed to be calibrated with this type of probe. Now you can calibrate these targets in your own lab! For use from -200 °C to 500 °C (the six-inch model goes to 300 °C), you won't find a better industrial standard in this configuration than our 5618B. We recommend using the 5618B PRTs with the 1523, 1524, 1502A, 1529, or 1560 thermometer readouts.

Manufacturer: DALI Brand: DALI

shipping:DHL etc Resolution：uncooled 160×120 FOV/Min focuse range:25°×19°/0.1m Thermal Sensitivity：≤0.06℃@30℃ Temperature Range:-20℃-+350℃ Screen：3.5" TFT colorful LCD 640*480 Drop test：2 meters

Manufacturer: FLIR Systems Brand: FLIR Model: FLIR i7 Color: Black and Gray

Use the FLIR i7 Compact Infrared Thermal Imaging Camera to detect problems before they become crises. The FLIR i7 is one of the smallest, lightest, and most powerful thermal cameras on the market. This powerful, non-invasii7 Compact IR Camera" Detect hidden problems and make quick damage assessments ve monitoring and diagnostic tool features intuitive one-handed operation, a 2.8-inch LCD color screen, precise thermal sensitivity, a rechargeable lithium-ion battery, and a storage capacity of up to 5,000 images. The included QuickReport software makes sharing and analysis of radiometric images a quick and easy. Flir i7 finds Problems, Evaluate Work, and Schedule Repairs Improperly functioning equipment can be dangerous or lead to lost productivity if not detected soon enough. Infrared inspection with the FLIR i7 will reveal minor variations in temperature that can signal electrical and mechanical failures, leaky air ducts, missing insulation, and moisture problems. Inspect motors, transformers, circuit breakers, pumps, heating and cooling systems, new equipment installations, and repairs by contractors. Roof and house inspectors, energy auditors, and asphalt-paving companies can rely on thermal cameras to ensure and report on quality jobs. With RESNET approved thermal resolution of 140 by 140 pixels, the FLIR i7 makes it easy to detect hidden problems in your home and work environment, allowing you to make quick damage assessments and be proactive rather than reactive. 5,000 Image Capacity and Lithium-Ion Battery for All-Day Use Warranty Information The FLIR i7 is backed by a manufacturer's two-year limited warranty on parts and labor. What's in the Box Camera, microSD card, miniSD adapter, battery, AC adapter with EU, UK, US, and Australian plugs, QuickReport software, USB cable, hand strap, carrying case, and CD of Manual and Documentation included. Find problems faster and more accurately with the rugged, high-resolution FLIR i7 point-and-shoot thermal imaging camera. Durable and easy to use, FLIR i-Series inf...

Manufacturer: Iris Brand: IRIS USA, Inc.

.da-ilf-gsep{ background-color: #000000; } .da-ilf-gsep h3{ color: #5798c9 !important; }

Manufacturer: Fluke Brand: Fluke

Fluke TiS Thermal Imaging Scanner Fluke proudly introduces an entry level thermal imager for quick, easy, and accurate problem identification and troubleshooting designed specifically for the building inspection professional. Whether you are a building inspector, home inspector, electrician, energy auditor, HVAC, insulator, or windows installer the Fluke Thermal Imaging Scanner is the perfect tool to help you identify hidden building construction issues, find moisture intrusion, detect energy loss/missing insulation, and many basic electrical connection and load problems. Now Fluke quality, durability, and performance are available in a thermal imager engineered for the value-conscious building professional. The Fluke TiS Thermal Imaging Scanner is the top-performing imager in its price class.

Manufacturer: Testo USA, Inc. Brand: Testo Model: 0563 0875 71

Quality right out of the box, with class-leading sensitivity and Testo SuperResolution option (320 x 240), this series of imagers provides the right amount of power and ?exibility to provide quality thermal imaging at an affordable value. Available in 4 variations to ?t the needs of Building Science and Preventive Maintenance Professionals, the 875i Series supplies the right amount of features for any job site.

Manufacturer: NETCNA Brand: NETCNA

The NTSC configuration of PS24 Scout Thermal Monocular from FLIR is a handheld thermal monocular useful for daylight and night vision applications. The 240x180 VOx thermal sensor measures the heat signature within the field of view and enables the operator to see beyond smoke, dust, and fog obscuring the visual scene. Thermal imaging creates an image by discriminating between differences in temperature, allowing the PS24 to consistently operate in daylight, pitch dark, and dynamic lighting conditions. To optimize the transmitted image for specific applications, this monocular features two selectable polarity modes and InstAlert mode for quicker identification of people and wildlife by highlighting body heat in red.