Temperature & Humidity - Page 277

Manufacturer: COLE-PARMER Brand: Digi-Sense

Easily monitor temperature in liquids, baths, air/gas, incubators, refrigerators, or freezers. Keep track of temperature conditions overnight or for any time period-minimum and maximum temperatures are stored until the memory is cleared. Models feature a triple display that simultaneously shows current, minimum, and maximum temperatures. . Set high and low alarms in 1° increments; alarm sounds when temperature rises above or falls below set points, and continues to sound even if temperature returns to nonalarm range. Thermometer reads ambient temperature or probe temperature. Probe is attached to a 10-ft (3 m) micro-cable that permits a doors to close on it; probe and cable are both submersible. Mount meter with included VelcroTM strips, wall-mount slots, or use flip-open stand on benchtop. Models 94460-70 has a wire probe and designed for general-purpose applications. What's Included: NIST-traceable calibration report supplied by the manufacture, plastic stand, double back tape and Velcro® for attaching holder to any surface, probe(s), and two AA batteries Monitor minimum and maximum temperatures- all at a single glance! Triple-display-shows high, low, and current temperature simultaneously

Manufacturer: Texas Instruments Brand: Texas Instruments

Air Quality Sensors Configurable AFE Potentiostat

Manufacturer: Reed Brand: Reed Instruments Model: LS-103

Specially designed to measure air or gases in heating and cooling units, ovens and engine exhausts. The LS-103 is color coded according to ANSI thermocouple identification standards.

Manufacturer: FLIR Brand: FLIR Model: T198484

The FLIR Pouch Case T198484 offers the convienence of a lightweight, portable case while still protecting your Exx-Series thermal camera investment. It's a padded black soft case that includes a shoulder strap and belt loop for easy field use.

Manufacturer: The Sensor Connection Brand: The Sensor Connection

These high temperature sensors are the choice for professional racing teams, R&D test labs, and enthusiasts. The EGT probes can be used for many different applications, including... but not limited to... Karts, Drag Racing, Formula 1, NASCAR, Off Road, Snowmobiles, Aviation, and Marine Racing.The Exhaust Gas Temperature Probe is capable of surviving extreme vibration and heat up to 2300 degrees F (1300 degrees C). The EGT probe will fit most internal combustion engine exhaust systems from approximately .750 inch diameter up to about 4 inch diameter with nominal installation modifications. The EGT probe is 0.187 diameter (4.75 mm) with a 90-degree bend to accommodate tight mounting locations. An adjustable (316 Stainless Steel) 1/8 NPT compression fitting adapter is included. All of our EGT probes are handmade in the USA.

Manufacturer: RPI, Corp. Brand: RPI

Ideal Digital Thermometer for monitoring temperatures in refrigerators, freezers, incubators, and water baths. Available with glass enclosed temperature buffered sensor that provides a stable reading when refrigerator or freezer door is opened. Also offered with a 3/16'' diameter x 3/4'' probe for immersion in tubes, heating blocks and water baths. Displays minimum, maximum, current probe temperature plus room temperature. Temperature range: -58°: to 158°:F (-50 to 70°:C) with accuracy of +1°:C. Additonal features include: built-in alarm and sealed probe. Supplied with battery, ceritificate of calibration and 10ft. cable.

Manufacturer: NOSHOK, Inc. Brand: NOSHOK Model: 75-060-BRASS

Allows a temperature instrument to be removed and replaced without shutting down and possibly draining the process. Reduces the possibility of damage to the temperature instrument. Provides protection to the operator. Made of brass. 6" thread length. 4-1/2" insertion.

Manufacturer: Oakton Instruments Brand: Oakton Instruments

This large dial thermohygrometer features an attractive plastic case and blue and white dial design to make it a decorative and functional addition to the lab or office.

Manufacturer: TRAULSEN Brand: Traulsen Model: 138-1040

SPECIFICATIONS LENGTH: 48" CAPILLARY, 1219 mm CAPILLARY OUTER DIAMETER: 2" DIAL, 3" FLANGE, 51 mm DIAL, 76 mm FLANGE MATERIAL: STAINLESS STEEL HOUSING WEIGHT: .5 lb TEMPERATURE RANGE: -40 TO 60 F, -40 TO 15 C NSF CERTIFIED: Y TYPE: FIELD CALIBRATABLE, RECESSED MOUNTED PART REFERENCE INFO DELFIELD: 3516038 KOLPAK: 29076-1075, 290761075 TRAULSEN: 27870, 344-27870-00 MODEL REFERENCE INFO DELFIELD MODELS: 549-CR, 549-OR DELFIELD DRAWERS AND/OR REACH-IN MODELS: RT000004, RT000060, V186114-32, V18664-32, V18672-32, V18684-P32, V18684-32, V18686-P32T, V18784-P32B TRAULSEN REACH-IN REFRIGERATOR/FREEZER-2 DOOR MODELS: ADT-1-32WUT, ADT-2-32WUT

Manufacturer: Texas Instruments Brand: Texas Instruments

Board Mount Temperature Sensors Auto Grade Low-Power Micro SOT-563