Temperature & Humidity - Page 315

Manufacturer: Thermco Brand: THERMCO

Thermco's Triple Display Digital Thermometer simultaneously shows the current, minimum, and maximum temperatures and updates continuously. An audible & visual alarm will trigger when the temperatures goes above or below the set temperatures. The minimum/maximum feature monitors critical temperature for any period of time, such as overnight or weekends. To comply with regulatory agencies requirements Thermco's Time-Stamp thermometer provides the date and time when the temperature being monitored exceeds the minimum and maximum settings and in real-time. Also an audible alarm will sound and flashing LED will be visible. Each thermometer is certified, serialized and traceable to NIST in Thermco's ISO17025, (Accreditation No. 69071) Calibration Laboratory and accredited by Ilac-MRA to assure accuracy and compliance with regulatory agencies. The thermometer probe is housed in an unbreakable plastic vial filled with a Bio-Safe buffering media which maintains the thermometer reading while the refrigerator or freezer door is open. Thermometers are supplied with dual magnets and velcro sets to allow attachment to walls or doors. Other features include flip out desk stand and wall mounting key hole in back of unit, and supplied with AAA alkaline batteries.

Manufacturer: Winters Brand: Winters Instruments Model: TIW03-2

Designed for use with al. industrial thermometers to creat. sealed system. Allows the easy replacement of thermometers without the need to shut down or drain the system. CAN/CGSB-14.4-M88 Compliant. CRN registered. 1 Year warranty. Applications: HVAC, pipes, chill water and hot water lines. Material: AISI stainless steel 316. Bore diameter: 7/16" tapered. Thermometer connection: 1-1/4" UNF. Process connection: 3/4" NPT male standard. Stem length: 3-1/2". Overall length: 4-1/4". Insertion length: 1-3/4". Lagging extension: 1". Connection: 3/4" NPT male. RoHS compliant.

Manufacturer: The Sensor Connection Brand: The Sensor Connection

These high temperature sensors are the choice for professional racing teams, R&D test labs, and enthusiasts. The EGT probes can be used for many different applications, including... but not limited to... Karts, Drag Racing, Formula 1, NASCAR, Off Road, Snowmobiles, Aviation, and Marine Racing.The Exhaust Gas Temperature Probe is capable of surviving extreme vibration and heat up to 2300 degrees F (1300 degrees C). The EGT probe will fit most internal combustion engine exhaust systems from approximately .750 inch diameter up to about 4 inch diameter with nominal installation modifications. An adjustable (316 Stainless Steel) 1/8 NPT compression fitting adapter is included. All of our EGT probes are handmade in the USA.

Manufacturer: SILICON LABS Brand: Silicon Labs

SILICON LABS SI7013-A10-IM TEMP/HUM SENSOR, 0.4DEG CEL, DFN-10

Manufacturer: The Sensor Connection Brand: The Sensor Connection

These high temperature sensors are the choice for professional racing teams, R&D test labs, and enthusiasts. The EGT probes can be used for many different applications, including... but not limited to... Karts, Drag Racing, Formula 1, NASCAR, Off Road, Snowmobiles, Aviation, and Marine Racing.The Exhaust Gas Temperature Probe is capable of surviving extreme vibration and heat up to 2300 degrees F (1300 degrees C). The EGT probe will fit most internal combustion engine exhaust systems from approximately .750 inch diameter up to about 4 inch diameter with nominal installation modifications. The EGT probe is 0.125 diameter with a 90-degree bend to accommodate tight mounting locations. An adjustable (316 Stainless Steel) 1/8 NPT compression fitting adapter is included. All of our EGT probes are handmade in the USA.

Manufacturer: Brand New

Acu Wrls Therm Forecast

Manufacturer: Palmer Instruments Brand: Palmer Model: 5BCP450/300F

Palmer All Pro Bimetal thermometers are an economical temperature solution for a variety of applications. Balancing economy and performance, this All Pro model is made of all welded 304SS to resist corrosive working environments. Case is hermetically sealed. Easy reading, 5" (127 mm) dial face is specially fabricated from low-glare finish metal, using a deep draw design for anti-parallax alignment of high visibility tapered black pointer with the scale graduation marks. 50 to 300°F Scale has 2° divisions. 4" (102 mm) stem. Accuracy: 1% of Full Range. One year limited warranty covers defects in materials and workmanship.

Manufacturer: The Sensor Connection Brand: The Sensor Connection

These high temperature sensors are the choice for professional racing teams, R&D test labs, and enthusiasts. The EGT probes can be used for many different applications, including... but not limited to... Karts, Drag Racing, Formula 1, NASCAR, Off Road, Snowmobiles, Aviation, and Marine Racing.The Exhaust Gas Temperature Probe is capable of surviving extreme vibration and heat up to 2300 degrees F (1300 degrees C). The EGT probe will fit most internal combustion engine exhaust systems from approximately .750 inch diameter up to about 4 inch diameter with nominal installation modifications. The EGT probe is 0.125 diameter with a 90-degree bend to accommodate tight mounting locations. An adjustable (316 Stainless Steel) 1/8 NPT compression fitting adapter is included. All of our EGT probes are handmade in the USA.

Manufacturer: UEI Test Equipment (UEITB) Brand: UEi Test Instruments Model: INF165C Color: Multicolored

The Scout series has a solution best suited for any application, whether it's quick spot checks at close range or sampling extreme temperature ranges in environments too hazardous or too remote to approach. All three are a reliable way to check, locate, and monitor temperature variances and are perfect for HVAC/R, electrical, industrial, facility, residential, marine, or automotive diagnostics and maintenance.

Manufacturer: UEI Test Equipment (UEITB) Brand: UEi Test Instruments Model: INF165C Color: Multicolored

The Scout series has a solution best suited for any application, whether it's quick spot checks at close range or sampling extreme temperature ranges in environments too hazardous or too remote to approach. All three are a reliable way to check, locate, and monitor temperature variances and are perfect for HVAC/R, electrical, industrial, facility, residential, marine, or automotive diagnostics and maintenance.