Temperature & Humidity - Page 345

Manufacturer: Qianson Brand: Qianson Model: TH20 Color: Black

Technical Specifications: Display: 0.36-inch high-brightness red LED The measurement resolution: 0.1 Temperature, humidity 0.1%RH Accuracy: Temperature±0.5℃, humidity±3%RH (5~95% RH) Measurement and control cycle: 0.5 seconds Range: Temperature -19.9~80.0℃; Humidity 0.0~99.9% RH The control output: two-way relay output, contact capacity 10A/250V AC, 10A/28V DC. Temperature control output AL1，AL2 output of humidity control. Two control values can be set independently and return difference. Power: AC 85~265V / DC 100~260V power consumption less than 4VA The working environment: Controller:-10~70℃，humidity below 90% RH ; Sensor:-40~80℃，humidity 0~99.9% RH Dimensions: 48 x 48 x 85mm; Hole size: 45 x 45 mm; Package Included: 1 x Digital temperature and humidity controller 1 x 2m 4-core Signal cable Integrated sensor (color random) 1 x English manual (if not in the package, contact me , i can send it to your email)

Manufacturer: Wahl Instruments, Inc. Brand: Wahl Instruments Model: 414-410F-210C

When the recorded temperature reached is a question of one point only or space is at a minimum, Wahl Single-Position Temp-Plates provide history at a glance. Easy-to-read recording positions at 410°F (210°C) is simply either "off" (light gray) or "on" (black) at one temperature point only. Perfect for warranties and critical process points.

Manufacturer: Thermco Brand: THERMCO

"ACCUSAFE" BIODEGRADABLE BLUE-SPIRIT FLUORPOLYMER-COATED - PARTIAL IMMERSION +20/500F x 2.0F

Manufacturer: Cooper-Atkins Corporation Brand: Cooper Model: SP160-01-8

Cooper-Atkins' panel meters allow you to obtain accurate interior temperature readings remotely from outside the cabinet. They reduce the frequency of opening your cooler / freezer door and keep the cold air in and the hot air out. All are designed for retro-fit applications.

Manufacturer: Winters Brand: Winters Instruments Model: TAS141

An all-purpose, economical and case. Separable thermowell. Impact resistant polypropylene. Red liquid-in glass. Dual scale (degree F and degree C). Back connected. 1/2" NPT process connection. 5 year warranty. Applications: Hot water lines, boilers, heating, ventilation and air conditioning. Scale: aluminum, painted white with black markings. Case: 5" black polypropylene. Lens: glass. Tube: glass, cushioned. Sensing liquid: kerosene, tinted red. Stem: brass. Swivel nut: brass. Thermowell: brass 1/2" NPT standard. Operating pressure: maximum 710 psi (50 kg/square centimeters). Ambient temperature: -40 degree F to 122 degree F. Process temperature: -40 degree F to 400 degree F. Accuracy: +/-2 percent of full Scale. Enclosure rating: IP54.

Manufacturer: REOTEMP Brand: REOTEMP Model: MM17

The REOTEMP Moisture Meter (MM17) measures the moisture content of your soil or compost pile by means of a sensor at the bottom of the probe. While composting or gardening you often may wonder: How wet's your soil?TM Now you will know and be able to more efficiently compost, garden or simply know if your plants need more water. The 0 to 10 scale of the MM17 indicates a relative "wetter" or "dryer". Note: the probe will not display a percent moisture. The probe is sensitive only at the tip. Calibration instructions are conveniently printed on the side of the meter head and included on the back of the box. The MM17 has a 1-year limited warranty. CALIBRATION The meter must first be calibrated by taking a sample of your compost or soil and adding water to the sample until it's at your "ideal" moisture level. Then you must adjust the calibration screw on the back of the dial until it reaches "5" on the 0-10 scale. Now that your meter is calibrated, when you come back again to check your compost or soil you'll know if it's too dry or too wet. If the reading is above "5" it's too wet, if it's below "5" it's too dry. A NOTE ON SALT CONTENT The meter reads "wetness" by measuring electrical conductivity, which is sensitive to salt content. If the salt content of your compost varies between testing locations, it could result in inconsistent readings. The meter is intended to give you a good idea of whether or not the center of your pile is too dry or too wet without having to dig deep into the pile for a "squeeze test".

Manufacturer: Dwyer Brand: Dwyer

Spring Pipe Mount Dial Thermometer, Bimetal, Dial Size 2 In.Connection Location BackTemp. Range (C) -40 Degrees to 120 Degrees , Accuracy +/-2 PercentCase Material Steel, Stem Material Copper, Window Material GlassFits Pipe Size 3/4 to 6 In., Manufacturers Warranty Length 1 yr. Pipe-Mount Bimetal ThermometersProvide nonintrusive surface temperature measurement on 3/4" to 6" pipes. Excellent for temporary installation. Durable, long-lasting steel housing.Accuracy: 2% Copper stem 2" dial with glass window

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

The Series BTP Pipe-Mount Bimetal Surface Thermometers are designed to accurately measure the surface temperature of 3/4" to 6" pipe sizes. The BTP series includes three spring sizes to securely mount to the pipe's surface. Pipe-mount thermometers are perfect for temporary installation and applications that require non-intrusive temperature measurement.

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

Series BT Bimetal Thermometers offer accurate, reliable service even in the toughest environments. These corrosion resistant units are constructed from stainless steel and are hermetically sealed to prevent crystal fogging. The bimetal element directly drives pointer, eliminating gears and linkage. An external reset screw allows field calibration and easy-to-read aluminum dial minimizes parallax error. Choose back connection, lower connection, or adjustable angle for easy viewing and installation. Adjustable models can be rotated a full 360° and tilted over a 180° arc. NOTE: When using in pressurized applications, use a suitable thermowell.

Manufacturer: OPTEK TECHNOLOGY Brand: OPTEK TECHNOLOGY

OPTEK TECHNOLOGY OPB390P51Z OPTO SWITCH, ANALOG OUTPUT