Temperature & Humidity - Page 376

Manufacturer: Phantom YoYo Brand: Phantom YoYo

The DS18B20 is a very small thermometer which can be easily hooked into the Arduino MCU through any digital input! It requires very little in the way of additional support, a couple of resistors and some hookup cables and you're set to go. DS18B20 is a digital temperature sensor which is from DALLAS U.S. It can be used to quantify the environmental temperature testing. is manufactured DALLAS U.S. The temperature range -55 ~ +125 ℃, the inherent temperature resolution of 0.5 ℃, support multi-point networking mesh. Three DS18B20 can deloyed on three lines, to achieve multi-point temperature measurement. It has a 9-12 bit serial output.

Manufacturer: SHXZ Brand: Funny DIY Expert

100% brand new and high quality. Unique 1-Wire Interface Requires Only One Port Pin for Communication. Each Device Has A Unique 64-Bit Serial Code Stored In An On-Board Rom. Requires No External Components. Thermometer Resolution is User Selectable from 9 to 12 Bits. Software Compatible with the DS1822. Applications: Thermostatic Controls, Industrial Systems, Consumer Products, Thermometers, or Any Thermally Sensitive System. Specifications: Model:DS18B20 Package: TO-92 Number of Pins :3 Voltage Supply: 3V~5.5V Sensing Temperature: -55°C ~ +125°C Accuracy :±0.5 °C Package Included: 10 x DALLAS DS18B20 18B20 TO-92 Thermometer Temperature Sensor

Manufacturer: uxcell Brand: uxcell

Functions: Digital Temperature Display, Outdoor Temperature Display, Min./Max. Record of Temperature. Suitable for measuring the temperature of refrigerator, freezer, etc. Great accessory in daily life. 

Manufacturer: Wahl Instruments, Inc. Brand: Wahl Instruments Model: 101-4-161F

Wahl's versatile Four-Position Temp-Plates are the most popular configuration for general purpose maintenance. This mini size has indicators is convenient for smaller spaces. Careful selection of temperature points will allow detection and recording of most overheat occurrences.

Manufacturer: R&L Brand: R&L

Monitor your boil or mash temperature with this Clip-On Dial Thermometer. Measures temperatures in both F and C, and attaches easily to the side of any brew kettle. Temperature range from -10~100C/ 0 to 220 F. Probe Length: 12" Gauge Face: 2" Diameter

Manufacturer: Cooper-Atkins Corporation Brand: Cooper Model: 1051-04-1

The Glass Stick thermometer features a large bore tempered-glass tube which is filled with a non-toxic liquid. It includes a plastic case with clip.

Manufacturer: Zhuhai Jida Huapu Instrument Co.,Ltd Brand: HoldPeak Color: infrared thermometer yellow

Intelligent Mode Auto Shut-off & Backlight Display Selection. Non-contact Dual Laser Technology Assures Your Safety Applying the dual laser technology, this product easily measures temperature without contacting the surfaces. Therefore, not only is the physical property of the measured item not compromised, but also the potential of injury caused by extreme high or low temperatures can be avoided. Various Functions Accessed by the Powerful MODE Button Through operation of MODE button, the emissivity value, maximum reading, minimum reading, average reading, temperature units (°F/°C), the LOCK mode, LOG function, high alarm and low alarm settings of the instrument can be accessed. Intelligent Temperature Alarm Function This product features an intelligent temperature alarm function. When readings exceed pre-determined measurement ranges, the thermometer issues an alarm beep and shows blinking icons on the LCD display. Thus, you will instantly know if the temperature of your measured item is out of the preset ranges. Lock Function for Long Term Temperature Monitoring and Hands Free Use The meter will automatically shut off after 7 seconds of non-operation to save power. However, you can use LOCK mode to monitor temperature over time without pressing and holding the trigger. This function makes it convenient to use when cooking, checking for a draft, or maintaining a car. Easy to Use The compact design and the ergonomic handle make this product easy to store and use on-the-go. It is so simple and convenient to use. Just point, aim, then measure. Notice: This item is NOT designed for body temperature measurement.

Manufacturer: Geatex Brand: Geatex Model: GXMT55

GXMT55 infrared thermometer provides accurate readings over a broad range of temperatures, from -58 to 1022 degrees Fahrenheit (-50 to 550 degrees Celsius). It displays both the current temperature and maximum temperature on the bright backlit LCD display. Advanced ergonomic design and rugged construction for industrial environments. This non-contact infrared thermometer has been designed for a broad range of uses including automotive diagnostics, HVAC service, electrical troubleshooting, cooking and food preparation, and hobbies. Advantages of Using Geatex Thermometers - Ability to measure hazardous or inaccessible objects. - Ability to measure high temperatures. - Ability to measure a moving target. - Eliminates contamination and mechanical effect on the target. - Speed. Typical infrared thermometer measurements takes less than one second. - Max temperature function: it can take the highest temperature of the area tested by scanning and save the data at the bottom of the screen. - EMS adjustable function: each article has its suitable emissivity, the adjustable emissivity function can make the test more accurate by adjust suitable emissivity for different articles. - Infrared Lens: The Infrared lens inside that provides temperature readings without touching or coming close to anything dangerously hot or cold.

Manufacturer: Wahl Instruments, Inc. Brand: Wahl Instruments Model: 101-4-121C

Wahl's versatile Four-Position Temp-Plates are the most popular configuration for general purpose maintenance. This mini size has indicators is convenient for smaller spaces. Careful selection of temperature points will allow detection and recording of most overheat occurrences.

Manufacturer: Wahl Instruments, Inc. Brand: Wahl Instruments Model: 240-350F

Wahl's versatile Four-Position Temp-Plates are the most popular configuration for general purpose maintenance. Careful selection of temperature points allows detection and recording of most overheat occurrences. This Fahrenheit label has temperature positions at 350°, 360°, 370° and 380°F.