|
|
-
4.1 of 5.0 with 50 Reviews
SALE PRICE: $89.00 1% OFF
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: TSF-4031
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: TSF-4031
The Series TSF Thermocouple FM Approved Limit Control provides audible alarm status along with a robust 16 amp relay output. Unit allows the user to easily select automatic or manual reset along with 10 other parameters. The TSF series has a built in reset button on the front panel or can accept an external reset.
-
4.1 of 5.0 with 17 Reviews
SALE PRICE: $89.99 42% OFF
Manufacturer: Extech Instruments
Brand: Extech
Model: 45158
Color: Green and yellow
Manufacturer: Extech Instruments
Brand: Extech
Model: 45158
Color: Green and yellow
Pocket-size meter measures air velocity, temperature, relative humidity, dew point and windchill. Includes tripod mount, 43in. lanyard and CR2032 lithium battery. Selectable averaging function of 5-, 10- or 13-second intervals Fold-up protective housing extends to 9in. Water-resistant housing that floats Data hold with auto power off Includes tripod mount, 43in. lanyard and CR2032 lithium battery Model 45158
-
4.1 of 5.0 with 46 Reviews
SALE PRICE: $89.99
Manufacturer: Lignomat
Model: MD-0
Manufacturer: Lignomat
Model: MD-0
Mini-Ligno moisture meters are made easy to use and sturdy. They give accurate and reliable measurements due to Lignomat's advanced measuring technology. The unique LED display is virtually unbreakable and bright enough to read even in poorly lit areas. The measuring range of 6-25% is still wide enough to cover all applications from woodworking to home construction, and water damage repair, lumber drying even measuring firewood. Integral pins can measure up to 7/16″ deep. This is the listing for the Mini-Ligno MD, price posted is for 1 Lignomat moisture meter.
-
4.1 of 5.0 with 85 Reviews
SALE PRICE: $90.57
Manufacturer: GEATEX
Brand: GEATEX
Model: GXMT38
Manufacturer: GEATEX
Brand: GEATEX
Model: GXMT38
|
GXMT38 infrared thermometer provides accurate readings over a broad range of temperatures, from -58 to 716 degrees Fahrenheit (-50 to 380 degrees Celsius). It displays both the current temperature and maximum temperature on the bright backlit LCD display. Advanced ergonomic design and rugged construction for industrial environments. This non-contact infrared thermometer has been designed for a broad range of uses including automotive diagnostics, HVAC service, electrical troubleshooting, cooking and food preparation, and hobbies.
Advantages of Using Geatex Thermometers
- Ability to measure hazardous or inaccessible objects.
- Ability to measure high temperatures.
- Ability to measure a moving target.
- Eliminates contamination and mechanical effect on the target.
- Speed. Typical infrared thermometer measurements takes less than one second.
- Max temperature function: it can take the highest temperature of the area tested by scanning and save the data at the bottom of the screen.
- EMS adjustable function: each article has its suitable emissivity, the adjustable emissivity function can make the test more accurate by adjust suitable emissivity for different articles.
Package Includes:
1 x Geatex GXMT38 Non-contact Infrared Thermometer1 x Geatex GXMT38 Temperature Gun User's manual1 x 9V DC battery
-
4.1 of 5.0 with 46 Reviews
SALE PRICE: $92.16 1% OFF
Manufacturer: CARLO GAVAZZI
Brand: CARLO GAVAZZI
Manufacturer: CARLO GAVAZZI
Brand: CARLO GAVAZZI
CARLO GAVAZZI IA08BLN25POM5 IND PROX SL M8 DC PNP NO PLUG
-
4.1 of 5.0 with 25 Reviews
SALE PRICE: $96.00 1% OFF
Manufacturer: Dwyer Instruments, Inc.
Brand: love
Manufacturer: Dwyer Instruments, Inc.
Brand: love
The TS Digital Temperature Switch is designed to regulate many heating and cooling applications. Easy programming via the tactile front keypad enables quick setup of the 12 parameters for simple, reliable operation. The user can define set point, heating/cooling regulation, hysteresis, cycle time, ambient probe adjustment and defrosting time. The unit features error or alarm messaging and password protection. View probe temperature on the bright red, 3-digit LED display. Select between temperature display in °F or °C, and 110 VAC, 230 VAC, or 12 VDC power supplies. The Series TS includes a thermistor with 5 ft (1.5 m) cable, fitting clips for panel mounting, gasket, rear terminal cover, and instruction manual.
-
4.1 of 5.0 with 18 Reviews
SALE PRICE: $98.00 1% OFF
Manufacturer: Oakton
Brand: Oakton
Model: WD-35808-71
Manufacturer: Oakton
Brand: Oakton
Model: WD-35808-71
|
The Oakton WD-35808-71 replacement probe is a single-junction, 12 mm, all-in-one, waterproof, pH/temperature electrode, with an epoxy body, and 0-12 pH range. The electrode, also known as a probe, measures the pH of a solution. It is commonly used for testing clean water and general-purpose applications. This electrode is an all-in-one type with a built-in combination pH electrode/temperature sensor, waterproof-type (6-pin) connector, and 30-inch cable for ease of use. It houses a gel-filled electrolyte, inside of its reference chamber to enhance performance, and has a close-knit, ceramic junction to prevent back diffusion problems, and resist clogging. It features a single-junction electrode for general-purpose applications, and an epoxy body for impact resistance and durability. It has a pin-type junction for low electrolyte flow and longer life, and has a BNC-connected combination reference and measuring cell, for ease of use and to provide tight coaxial cable connections.
-
4.1 of 5.0 with 3 Reviews
SALE PRICE: $98.60 1% OFF
Manufacturer: MeMeDa
Brand: Dame Products
Manufacturer: MeMeDa
Brand: Dame Products
|
You are welcome to use our product. Before using it, read the description carefully. It will tell you how to operate it correctly and inspect it in a simple way so that the durability of the instrument can be brought into play. This is a precision instrument adopting HF electromagnetic waves to measure the moisture content ratio without damaging the object under test. It can be set depending on different building material to raise its measurement accuracy.Characteristics Measurement through HF electromagnetic sensing 10 different at option * Automatic temperature compensation Setting of upper limit of moisture content ratio, prompting of overrunning Ultra-large LCD ensuring clear readings Automatic prompting of low voltageTechnical specifications Range of measurement:0~40% Error:±(1%±1) Resolution:0.5% Environment temperature: -5℃~40℃ Humidity: 0~80%Rh Power supply:3×1.5V AAA battery (not including battery) Weight:95 g Size:132×67×26mm ImportantPacket Content: 1 x Moisture meter
-
4.1 of 5.0 with 7 Reviews
SALE PRICE: $98.70 1% OFF
Manufacturer: Process Technology
Brand: NALTIC
Manufacturer: Process Technology
Brand: NALTIC
Resettable Metal over the side Fuse/Protector 230 to 300°F (110 - 150°C) RedP7 2805-18-R
-
4.1 of 5.0 with 24 Reviews
SALE PRICE: $99.00 24% OFF
Manufacturer: Martel Electronics
Brand: Martel Electronics
Model: 80029
Manufacturer: Martel Electronics
Brand: Martel Electronics
Model: 80029
The Martel thermocouple lead kit includes J-type, K-type, T-type, and E-type thermocouple sensors for use with a temperature calibrator (sold separately). The cables are each terminated with a standard mini-connector on one end and bare leads on the opposite end. Both the connectors and wire are color coded according to ANSI standards for identification.Martel Electronics manufactures test and measurement equipment such as calibrators, pressure pumps, and meters. The company, founded in 1987 and headquartered in Derry, NH, meets International Organization for Standardization (ISO) standard 9001.
|
|