Temperature & Humidity - Page 46

Manufacturer: KKmoon Brand: KKmoon

The meter for PPM HTV directly measures airborne formaldehyde concentrations as well as ambient temperature. It's widely used in the following application scenarios:   ●Building materials and indoor air quality detection.    ●Environment and Public Health inspection.   ●Estate and property management.   ●Industrial production process of formaldehyde detection, such as paint and paper manufacture.    ●Hospitals, pharmaceutical and clinic formaldehyde detection.    ●Tracing the formaldehyde release source in the environment.    ●To assess the efficiency of hvac system.    ●To assess the efficiency of formaldehyde scavenger.  With further importance being put on air quality in public buildings, the workplace and in homes, the formaldehyde tester is aimed towards being the most accurate meter while still providing quick and simple operation  from a hand-held device.Specification: Measurement range: 0～5PPM Sampling Frequency: 1s Response Time(T90): T90＜60s Formaldehyde Sensor： Range: 0～5ppm as standard (0～6.7 mg/m3 at 25℃) Resolution: 0.001ppm Accuracy: ≤0.1ppm：±20%       ＞0.1ppm: ±10% Resolution: 0.1℃ Accuracy: ±1.5℃             Alarm Mode: sound alarm, light alarm, vibration alarm                 Alarm: Low concentration 0.1PPM alarm yellow light flashing    High concentration 0.3PPM alarm red light flashing(alarm concentration can also be set up)                   Battery Type: 3 * AAA 1.5V Alkaline Batteries (NOT Included)

Manufacturer: Thermco Brand: THERMCO

This wireless thermometer from Thermco simultaneously shows the temperature of Main Unit and up to 3 Wireless Sensors (ACCD303163). excelent for monitoring Freezers, Refrigerators and Incubators. The Display also has the option of toggling between the Day or Minimum/Maximum recored temperatures.

Manufacturer: Winters Brand: Winters Instruments Model: TSD9ITSD

The Winters TSD series industrial 9IT digital thermometer with solar-powered display and 3-1/2" probe is for monitoring temperature in industrial applications such as plumbing and facility maintenance. It measures temperature from -45 to 260 degrees C (-50 to 320 degrees F), with an accuracy of + or - 1% of the reading. The LCD screen is powered by solar energy in light levels greater than 16 lux and switches to battery power when light levels drop below 16 lux. The operator can choose to display readings in degrees Fahrenheit or Celsius. The stem-style probe is 3-1/2" long. It has a removable brass thermowell with a 3/4" NPT connection that helps protect the sensor from damage due to impacts and abrasion. Without the thermowell, it has a 1-1/4" UNEG swivel nut connection. The angle of the stem can be adjusted. The display body is made from ABS plastic, which resists impact and wear.SpecificationsTemperature measurement range-45 to 260 degrees C (-50 to 320 degrees F)Accuracy+ or - 1% of the readingUpdate rate6 secondsOperating temperature measurement range-10 to 65 degrees C (-14 to 150 degrees F)Enclosure ingress protection ratingNEMA 5/IP54Display dimensions*63.7 x 116.7 mm/2.55 x 4.67 in. (H x W)*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right Digital thermometers are instruments used to measure the temperature of air, liquids, or surfaces electronically. They may measure temperature in Celsius, Fahrenheit, or both. Most digital thermometers use thermistors, which are small electronic resistors. Thermistors are made out of metals that conduct electricity within a certain range and become more conductive the warmer they get. A microcontroller inside the thermometer measures this electrical conductivity and converts it to a temperature, which is displayed on an LCD. Digital thermometers are used in a wide range of applications, including in laboratory settings, food service and storage, and in doctors' offices and hospitals.Winters Inst...

Manufacturer: iPower Distributor L&G Brand: Titan Controls Model: 702845

40DegreeF to 100DegreeF gives the grower a great range of temperature settings for their garden. Precise temperature control of your grow room heating and cooling equipment. Built-in 4DegreeF split differential maintains garden in the proper temperature zone. Durable powder coated steel chassis will stand up to the toughest conditions. Change from 'Heating' to 'Cooling' mode with a flip of the switch. Discrete green light indicates that equipment is operating. ETL listed for use in commercial applications. 15 Amps/120 Volts/60 Hz. Made in the USA. 5 year warranty.

Manufacturer: BENETECH Brand: Benetech

Features - Memory storage function (up to 12 data) - Wide Temperature range with -18 ~ 1150 °C (0 ~ 2102 °F) - With D:S = 20:1, maximum distance from the target object - Highly accurate and reliable - Adjustable Emissivity from 0.10 to 1.00 (Preset at 0.95) - Spectral Response from 8 to 14 µm - Large clear LCD display with Backlight - 3 levels Battery Life Indication - Auto Power Off - Data Hold Function - Access surface temperature in 1 second - Selectable between °C and °F - Maximum, Minimum, Average and Difference temperature functions - Adjustable High / Low Temperature Alarm - Fast response time (0.5 seconds) - Measure hazardous or inaccessible objects (high-voltage parts) - Pre-Calibrated in Factory - Targeting guide or laser pointer with on/off switch for accuracy are provided - Laser Pointer on/off feature One Set Included - 1 x Professional Infrared Thermometer - 1 x Instruction Manual - Standard Factory Package

Manufacturer: DX Brand: Unknown

Temperature range：-50 ~ 1150℃ ( -58~2102℉) *Accuracy：±1.5% or ±1.5℃ *Repeatability：±1% or ±1℃ *Distance Spot Ratio：20:1 *Emissivity：0.1~1.00 adjustable *Resolution：0.1℃/0.1℉ *Response Time：500ms *Wavelength：8-14μm *MAX/MIN/AVG/DIF reading *High/Low Temperature alarm setup *Data Store/Recall Function *℃/℉ Selection *Data Hold function *Laser Target Pointer ON/OFF selection *Backlight ON/OFF selection *Auto Power Shut Off in 7 seconds without any operation *Power supply：9V battery *Weight：312g（Including battery） *Dimension：200*155*59mm *Ganranttee: 12months

Manufacturer: Etekcity Brand: Etekcity Color: Black / Gray

Note：1. The measuring surface is about 2cm below the infrared aiming point.2. The laser targeting system is most accurate at the point where the laser pointers overlap (approx. 14 inches).Dual point lasers for ideal distance! Keep a suitable distance to the target, where the two lasers overlap, then you will get the most accurate measurement. 16:1 High distance spot ratio! This means you may measure the temp of a smaller area at the same distance compared to other 12:1 thermometers; thus the readings are much more accurate! 0.1 - 1.0 Adjustable emissivity! Most organic materials and painted or oxdized surface have an emssivity of 0.95. Other materials, such as polished metal surface, have a different emissivity level, which should be taken into account for accurate temperature measurement. With adjustable emissivity, this thermometer can give you a more reliable result. Infrared Lens Infrared lens help you measure high temperatures, hazardous and inaccessible objects, and even moving targets Specifications Temperature Range: -58 to 1076°F (-50 to 580 ℃) Accruracy：±2% Distance Spot Ratio: 16:1 Emissivity Adjustable: adjustable from 0.1 to 1.0 Response Time and Wavelength: ≤ 500ms Repeatability: ±1% or ±1℃ Resolution: 0.1 ℃ or 0.1°F Package Included 2 x Etekcity Lasergrip 630 IR thermometer 2 x 9V DC battery 2 x User's manual 2 Year Warranty by Etekcity

Manufacturer: Dwyer Instruments, Inc. Brand: love

The compact Series 16C Temperature Controller offers accurate temperature measurement and control in a 1/16 DIN package. Designed for direct or reverse acting (cooling or heating) control, the Series 16C can be programmed for simple ON/OFF or more complex PID control functions. PID control is supported with manual or auto-tuning. Select relay, voltage or current output for control methods. The Series 16C accepts a variety of thermocouple and RTD inputs. Process value and setpoint value are displayed simultaneously on the large dual LED. Auto-tuning, engineering units (°F or °C), and alarm status is also indicated on the faceplate. Two alarm outputs are included on the unit with 12 preprogrammed alarm functions.

Manufacturer: Onset Computer Corp Brand: Onset HOBO Model: UX100-001-KIT Color: White

The UX100-001 is a data logger with an internal sensor for measuring and recording ambient temperature readings. The data logger has a -20C to 70C temperature measurement range with 0.21C accuracy. The LCD display shows current measured temperature, recording mode, battery level and alarm status. The UX100 Series of data loggers has a user-replaceable battery, software-selectable sampling rate of 1 second to 18 hours and stores up to 84,650 measured readings before download to computer is necessary. Simply connect the USB cable (included) to the USB Port on your PC Computer (Windows 8, 7, Vista or XP) or Mac (OS X 10.6, 10.7 or 10.8) and the HOBOware software will configure your data logger and download the data for analysis. HOBOware software is needed for setup of data logger and download of recorded data. Data can be exported and graphed within the software. This Kit includes UX100-001 Data Logger, USB Cable and HOBOware Software Download Link.

Manufacturer: Etekcity Brand: Etekcity Color: Black / Gray

Note：1. The measuring surface is about 2cm below the infrared aiming point.2. The laser targeting system is most accurate at the point where the laser pointers overlap (approx. 14 inches).Dual point lasers for ideal distance! Keep a suitable distance to the target, where the two lasers overlap, then you will get the most accurate measurement. 16:1 High distance spot ratio! This means you may measure the temp of a smaller area at the same distance compared to other 12:1 thermometers; thus the readings are much more accurate! 0.1 - 1.0 Adjustable emissivity! Most organic materials and painted or oxdized surface have an emssivity of 0.95. Other materials, such as polished metal surface, have a different emissivity level, which should be taken into account for accurate temperature measurement. With adjustable emissivity, this thermometer can give you a more reliable result. Infrared Lens Infrared lens help you measure high temperatures, hazardous and inaccessible objects, and even moving targets Specifications Temperature Range: -58 to 1076°F (-50 to 580 ℃) Accruracy：±2% Distance Spot Ratio: 16:1 Emissivity Adjustable: adjustable from 0.1 to 1.0 Response Time and Wavelength: ≤ 500ms Repeatability: ±1% or ±1℃ Resolution: 0.1 ℃ or 0.1°F Package Included 2 x Etekcity Lasergrip 630 IR thermometer 2 x 9V DC battery 2 x User's manual 2 Year Warranty by Etekcity