Temperature & Humidity - Page 467

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

The Series STC Pipe-Mount Bimetal Surface Thermometers are designed to accurately measure the surface temperature of 3/4" to 2-3/8" pipe sizes. The STC series is available in three different clip sizes and feature a bimetal spiral spring sensing element that provides quick temperature readings. Pipe mount thermometers are perfect for temporary installations and applications that require non-intrusive temperature measurements.

Manufacturer: Testo AG Brand: Testo Model: 0516 0222

Testo TopSafe with 2 attachment magnets. For 922 Temperature measuring instrument. Protects from impact and dirt.

Manufacturer: Wilmad-LabGlass Brand: SP Scienceware Model: ML-290-706

When used with a thermometer calibrated for 75mm immersion, the bulb of the thermometer will extend 40mm below the bottom of these borosilicate glass adapters. Adapters feature Standard Taper inner joint at the bottom and Standard Taper outer joint at the top.

Manufacturer: BANNER ENGINEERING Brand: BANNER ENGINEERING

BANNER ENGINEERING BRT-32X20AM REFLECTOR

Manufacturer: Hotset America Brand: Hotset America

This Hotset 4010822 Hotrod 230V, 315W cartridge heater has a 6.5 mm diameter, is 80 mm long, and is suitable for use with packaging machines, extruders, casting machines, cutting knives, and other industrial tool-heating applications that require a heat source. It has a maximum watt density of 65W/sq. cm (419W/sq. inch) and a maximum Underwriters Laboratories (UL)-rated watt density of 57W/sq. cm. Its leads are mounted internally and sealed with ceramic. The heater has a European standard 1.4541 stainless steel sheath for resistance to corrosion and is filled with an NiCr (nichrome) 8020 heating conductor for high-temperature stability. The sheath has a maximum temperature rating of 750 degrees C (1,380 degrees F). The heater is rated for a maximum of 480V and has a maximum UL-rated voltage of 250V. It has an Ingress Protection (IP) rating of IP67 for protection from dust and from water when immersed to a depth of 1 m for up to 30 minutes. It is Verband der Elektrotechnik (VDE) certified for electrical safety and is Underwriters Laboratories (UL) and Underwriters Laboratories of Canada (cUL) Recognized for quality assurance. A press fit is recommended for this heater. This cartridge heater is suitable for a wide range of tool heating applications in the packaging, textile, and paper industries, among others.SpecificationsHeater diameter6.5 mmHeater length80 mmPower rating315WSheath materialEuropean standard 1.4541 stainless steelHeating conductor materialNiCr 8020Maximum sheath temperature750 degrees C (1,380 degrees F)Maximum voltage480V, UL rated to 250VDiameter tolerance-0.02 to -0.06 mmMaximum watt density65W/sq. cm (419W/sq. inch), UL rated to 57W/sq. cmIP ratingIP67Wattage tolerance-10 to +10%High voltage test1,500 VAC at an operating voltage of more than 24V; 500V at operating voltages less than or equal to 24VInsulation resistanceGreater than or equal to 5 megohms at 500 VDCLeakage currentLess than or equal to 0.5 mA at 253 VACLength tolerance-1.5 to +1.5% maximum, -1 to +1 mm minimumStandards metVDE cert...

Manufacturer: Wahl Instruments, Inc. Brand: Wahl Instruments Model: 414-450F-232C

When the recorded temperature reached is a question of one point only or space is at a minimum, Wahl Single-Position Temp-Plates provide history at a glance. Easy-to-read recording positions at 450°F (232°C) is simply either "off" (light gray) or "on" (black) at one temperature point only.  Perfect for warranties and critical process points.

Manufacturer: Wahl Instruments, Inc. Brand: Wahl Instruments Model: 443-082C

This specialized Four-Position Temp-Plate is for monitoring overheat conditions directly on the surface of integrated circuits during wafer fabrication. Designed to withstand exposure to high heat, vacuums and corrosive gases when used in the demanding semiconductor industry.

Manufacturer: China Brand: Human Body Non-Contact Infrared Thermometer - Whot Model: Human Body Non-Contact Infrared

This product is a major measure the body temperature of non-contact infrared thermometer, according to the differences in human skin and to test the different parts of the human body, the measured temperature will be different, this is normal, the reason is that the more the more exposed body parts are influenced by environmental temperature. When the indoor and outdoor temperature changes a lot, should put the human body infrared thermometer for indoor use again after 15 to 20 minutes

Manufacturer: Arco Electronics Limited Brand: Smart Sensor Model: AR820 Color: Ivory

• Detection of gas: Formaldehyde Gas(CH²O)• Measuring range: 0~3.00mg/m3• The principle of sensor: Electrochemical principle, life for two year• Resolution: 0.01mg/m3• Accuracy:

Manufacturer: CNJW Brand: CNJW

This thermometer is for use in ships, pipelines and some heating or cooling facilities. It remains direct and accurate, and reliable and resistant to vibration. Our company combines traditional craft and advanced computer painting techniques, as well as permanent amble screen painting, making scale inerasable. Our V-shape thermometer has protective tubes enhance safety at the point where the thermometer is fixed to the facility, making it operate with at high pressures while being easily repairable.