Temperature & Humidity - Page 479

Manufacturer: The Sensor Connection Brand: The Sensor Connection

Applications: Motor Sports, Marine, Aviation, Power Gen, Research & Development, Alternative Energy, Military The Exhaust Gas Temperature Sensor is specifically designed for use in racing, tuning, and testing applications. Made in the USA from superior materials. The Exposed Tip sensing junction provides immediate response to dynamic temperature changes.The Exhaust Gas Temperature Probe is capable of surviving extreme vibration and heat up to 2300 degrees F (1300 degrees C). The EGT probe will fit most internal combustion engine exhaust systems from approximately .750 inch diameter up to about 4 inch diameter with nominal installation modifications. The EGT probe is 0.187 diameter (4.75 mm) with a 90-degree bend to accommodate tight mounting locations. An adjustable (316 Stainless Steel) 1/8 NPT compression fitting adapter is included. All of our EGT probes are handmade in the USA

Manufacturer: KKmoon Brand: KKmoon

Features: Moisture Measurement from 0% to 90% Ambient Temperature and Relative Humidity Measurement Data Hold and Display Back Light Maximun and minimun values inquiry function LCD Display, moisture bar display Units switch Auto power off after 10 minutes without no key pressed Sturdy construction,easy to carry Specifications: Batteries: 2 * 1.5V AAA(not included) Product Size: 130 * 55 * 29mm Product Weight:140g Electric Conductivity (Resistance Sensor) Range: 0.0~60.0%; Temperature (Temperature Sensor) Range: -10.0~50.0°C (14.0~122.0°F) Sampling Rate: water 0.5 S/time, temperature and humidity: 1.5 S Units: Material Moisture: % Environment Humidity: %,WB,TD Environment Temperature: C, F Materials Moisture Range: Material 1: Beech, Spruce, Larch, Birch, Cherry, Walnut 8.5~60.0% Material 2: Oak, Cedar, Maple, Ash Tree, Citigroup, Tamarisk 6.8~53.4% Material 3: Smoothing Cement, Concrete 0.9~24.5% Material 4: Anhydrite Screed 0.0~12.2% Material 5: Cement Mortar 0.7~9.2% Material 6: Lime Mortar, Plaster 0.5~11.1% Material 7: Brick 0.0~17.8% Resolution: Material Moisture:0.1% Temperature : 0.1C,0.1F Humidity: 0.1% Accuracy (perform under temperature of 25C): Conductivity: ±2% Temperature: ±2C(-10C~+50C) Humidity: ±5%(10...90%) Package Size: 15.5 * 7.5 * 5.5cm / 6 * 3 * 2.1in Package Weight: 196g/6.9oz Package List: 1 * Mastech MS6900 Professional Mini Digital Moisture Meter 1 * Caryring Bag 1 * User Manual

Manufacturer: Miljoco Brand: Miljoco Model: B3099A65-4

3" Bimetal thermometer, glass lens, 1/2 NPT CBM, adjustable-angle 4" stem, 150 to 750°F/C, 300 series stainless steel case, ring and stem.

Manufacturer: Miljoco Brand: Miljoco Model: B3098A39-6

3" Bimetal thermometer, polycarbonate lens, 1/2 NPT CBM, adjustable-angle 6" stem, -40 to 160°F/C, 300 series stainless steel case, ring and stem.

Manufacturer: 5COU Brand: 5COU Color: white

**No more tantrums with a convenient thermometer that can take a child's temperature without contact. Also handy in detecting the temperature of an object. Professional accuracy means the readout is correct every time. Fast, one-second readout. Nite-Glo® display is easy to read, even in the dark. Automatic shut-off. °F / °C switchable, for your convenience. Read-Out Type: Digital; Quantity: 1 each.

Manufacturer: Miljoco Brand: Miljoco Model: B3099A54-2

3" Bimetal thermometer, glass lens, 1/2 NPT CBM, adjustable-angle 2.5" stem, 0 to 250°F/C, 300 series stainless steel case, ring and stem.

Manufacturer: Trerice Brand: Trerice Model: PTC14401

Trerice Tridicators are designed specifically for use with hot water boilers. Because Tridicators provide both temperature and pressure measurement, only one access point to the boiler is required. Available in 21/2” and 3” dial sizes with rear and bottom connections, there is a Trerice Tridicator to suit your needs.

Manufacturer: KEMET NEC-Tokin Brand: KEMET NEC TOKIN

Board Mount Temperature Sensors SensThermOHD3 100C 6W Make

Manufacturer: Sper Scientific Brand: Sper Scientific

Accurate IR at a reasonable price. A great feature of infrared thermometers is that they do not require physical contact to measure the temperature of an item. Simply hold the IR thermometer gun, press the trigger and aim the laser guide at the target. Results immediately appear in °C or °F on the backlit LCD and are automatically held for 6 seconds after the trigger is released. Has auto power off and an 8:1 distance to spot ratio (D:S). Rugged and ergonomically designed this infrared thermometer gun comes complete with batteries and measures up to 930°F (500°C) in 0.2° resolution. IR thermometers are used to safely measure the temperature in: • Inaccessible, hot or hazardous objects in electrical, hazmat, HVAC, and other fields. • Moving machinery in factories, automobiles and elsewhere. • Electrical troubleshooting HVAC energy audits. • Avoiding contamination in the food, beverage and pharmaceutical industries.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: TSF-4010

The Series TSF Thermocouple FM Approved Limit Control provides audible alarm status along with a robust 16 amp relay output. Unit allows the user to easily select automatic or manual reset along with 10 other parameters. The TSF series has a built in reset button on the front panel or can accept an external reset.