Temperature & Humidity - Page 515

Manufacturer: The Sensor Connection Brand: The Sensor Connection

These high temperature sensors are the choice for professional racing teams, R&D test labs, and enthusiasts. The EGT probes can be used for many different applications, including... but not limited to... Karts, Drag Racing, Formula 1, NASCAR, Off Road, Snowmobiles, Aviation, and Marine Racing.The Exhaust Gas Temperature Probe is capable of surviving extreme vibration and heat up to 2300 degrees F (1300 degrees C). The EGT probe will fit most internal combustion engine exhaust systems from approximately .750 inch diameter up to about 4 inch diameter with nominal installation modifications. The EGT probe is 0.125 diameter with a 90-degree bend to accommodate tight mounting locations. An adjustable (316 Stainless Steel) 1/8 NPT compression fitting adapter is included. All of our EGT probes are handmade in the USA.

Manufacturer: NXP Brand: NXP

NXP PCT2075D,118 TEMPERATURE SENSOR, 2DEG CEL, SOIC-8

Manufacturer: Reed Brand: REED Instruments Model: IR-98

2-in-1 infrared thermometer with integral thermistor probe. Maximum/Minimum record function. Data hold function. Lock feature for continuous monitoring. Overrange indication. Degree F/degree C switchable. Auto power-off. Includes button battery. IR Temperature range: -35 to 260 degree C. 0.1 degree C resolution. +/-2 percent reading. 2 degree C. Response time: less than 500 ms. Emissivity: digitally adjustable from 0.10 to 1.00. Optical resolution: 1:1 (Distance: Spot size). Thermistor temperature range: -40 to 260 degree C. 0.1 degree C resolution. Accuracy: -40 to -10 degree C: 5 degree C; -10 to 180 degree C: +/- 2 percent, 2 degree C; 180 to 260 degree C: +/- 3 percent, 2 degree C. Measures 140mm height by 42mm width by 25mm depth.

Manufacturer: J&D Manufacturing Brand: J&D Manufacturing Model: VFT130144 Color: Gray

This J&D Manufacturing Variable Speed Control, model VFT130144, is a 8 Fan, 120 Volts, 10.0 Amps operation. This economical manual variable speed control utilizes full-wave phase control circuitry to minimize power loss reducing energy requirements while you control your variable speed fan. Features include: Use for Shaded Pole, Permanent Split Capacitor (PSC), and Universal AC/DC motors; Built in on/off AC line switch; Minimum speed trim pot; RFI noise suppression filter (provides RFI and EMI suppression); Flame retardant ABS enclosure; All models mount in a standard 2” x 4” electrical wall box; UL/CUL listed (file# E51028); CSA certified (file# 030837_0_000).

Manufacturer: Thomas Scientific Brand: Thomas

Ideal for routine measurements and round-the-clock monitoring of all quality-control needs and critical experimental requirements. Wall-mountable unit is for use in hoods, cleanrooms, coolers, stockrooms, incubators, environmental chambers, desiccators, and chemical storage areas. Unit features a remote temperature/humidity sensor with a 2.1m (7') cable. The triple display simultaneously shows high, low, and current humidity or high, low, and current temperature. The minimum/maximum memory feature for both temperature and humidity permits monitoring conditions overnight, on weekends, or over any time period. The alarm may be set in 1% RH and 1° increments. Alarm sounds when reading rises above or falls below set points. Unit also features a digital display with easy-to-view 1.3cm (1/2") high digits that can be read from 3.1m (10') away.

Manufacturer: KEMET NEC-Tokin Brand: KEMET NEC TOKIN

Board Mount Temperature Sensors SensThermOHD3 80C 6W Make

Manufacturer: KEMET NEC-Tokin Brand: KEMET NEC TOKIN

Board Mount Temperature Sensors SensThermOHD3 90C 6W Make

Manufacturer: Highside Chemicals Brand: HIGHSIDE

The Highside® THAWZONE® quick service kit is the original liquid dehydrate for control of moisture in refrigeration systems. Completely safe-frees a frozen system in minutes with no methanol. All new formulation is safe, nonpoisonous, biodegradable, and compatible with all refrigerants and refrigeration lubricants, including but not limited to all CFCs, HFCs, and HCFCs. Kit comes ready to use with a 2-oz. injector pre filled with THAWZONE, along with a 12" charging hose with control valve and caps. Note: For professional use only.

Manufacturer: The Sensor Connection Brand: The Sensor Connection

These high temperature sensors are the choice for professional racing teams, R&D test labs, and enthusiasts. The EGT probes can be used for many different applications, including... but not limited to... Karts, Drag Racing, Formula 1, NASCAR, Off Road, Snowmobiles, Aviation, and Marine Racing.The Exhaust Gas Temperature Probe is capable of surviving extreme vibration and heat up to 2300 degrees F (1300 degrees C). The EGT probe will fit most internal combustion engine exhaust systems from approximately .750 inch diameter up to about 4 inch diameter with nominal installation modifications. The EGT probe is 0.187 diameter (4.75 mm) with a 90-degree bend to accommodate tight mounting locations. An adjustable (316 Stainless Steel) 1/8 NPT compression fitting adapter is included. All of our EGT probes are handmade in the USA.

Manufacturer: Cooper-Atkins Brand: Cooper Model: CT180-51-6

Pack of 12 Bi-Metal thermometers.