Temperature & Humidity - Page 553

Manufacturer: Ashcroft Inc. Brand: Ashcroft Model: 30EI60R06050/550F

Manufacturer: KEMET NEC-Tokin Brand: KEMET NEC TOKIN

Board Mount Temperature Sensors SensThermOHD5R 65C 1W Break

Manufacturer: LABFACILITY Brand: LABFACILITY Model: RTF4-2/NAH-LABFACILITY

LABFACILITY RTF4-2/NAH SENSOR, PT100, PATCH

Manufacturer: Embedded Data Systems Brand: Embedded Data Systems

The MeshNet Wireless Temperature and Light Sensor, MN-ENV-TL, provides an intuitive way to reliably monitor temperature & pressure in indoor environments. The MeshNet System utilizes the 2.4GHz frequency range allowing for global usage. Each MeshNet sensor can be tailored through the user defined parameters to provide the appropriate responsiveness & battery life. The wireless sensors provide highly accurate temperature and barometric pressure readings; as well as a pulse counter and a discrete input. Transmission reliability is provided by each sensor having the capability to both transmit and receive data. The receiving capability enables sensors to confirm the reception of data transmissions. Missed confirmations trigger additional transmissions throughout the available channels. All MeshNet devices report the strength of the transmissions they receive, allowing areas that may be susceptible to interference to be identified and addressed proactively (e.g. adding repeaters). A simplistic setup process was achieved in the MeshNet System. Merely, connect the sensor to the controller using the linking cable and apply power to the units. Once the sensor's LED starts blinking the linking is completed. You can now disconnect the linking cable deploy the sensor. The MeshNet sensors achieve battery efficiency by spending the majority of their time in sleep mode. They awake at a user defined rate and calculate the sensor values. Next they transmit the data if an alarm became active or when a transmission was scheduled. The sensors listen momentarily to receive a confirmation then return to sleep mode. This provides an ideal balance between energy efficiency and transmission reliability.

Manufacturer: Honeywell Brand: Honeywell Model: HEL-716-U-0-12-00

Industrial Temperature Sensors 1000Ohm, 24 Gauge .1%Linearity,Ceramic

Manufacturer: Honeywell Brand: Honeywell

Industrial Temperature Sensors Surface 100,000 Ohm +/-1.0

Manufacturer: 3M Brand: 3M

3M replacement wick for QUESTemp and WIBGET area heat stress monitors.

Manufacturer: Maxim Integrated Brand: Maxim Integrated

Board Mount Temperature Sensors 12-Bit + Sign Temperature Sensor

Manufacturer: Santacary Technology Brand: Santacary

Santacary i2 is a precise indoor air quality detector suitable for monitoring low level concentrations of hazardous formaldehyde vapors in mg/m3. It cans measures formaldehyde (HCHO) concentration in a range of 0-5 mg/m3 and a resolution of 0.01 mg/m3. i2 can be widely used in the new office, new home, super market, gardening, furniture, wooden floor, indoor decoration, medical, food, wall papers, construction materials construction, paper manufacture, industrial safety, labor-working place, etc. for indoor formaldehyde gas detection, test and verify the efficiency of the air purifier and formaldehyde removing detersive.

Manufacturer: Thermo Scientific Brand: Oakton Model: WD-08500-61

This probe is designed for monitoring a wide range of flat surfaces, especially hard to reach areas.