Temperature & Humidity - Page 56

Manufacturer: FLIR Systems, Inc. Brand: FLIR Model: T198583

FLIR Tools/Tools+ is a software suite specifically designed to provide an easy way to update your camera and create inspection reports. This software can also help make advanced reports with the data recorded with your thermal imager. Software imports and manipulates imagers photos.

Manufacturer: Agratronix Brand: AgraTronix Model: 08150

AgraTronix 08150 is a reliable easy-to-operate handheld coffee moisture meter which is able to measure parchment as well as green beans of coffee. The unit s accuracy and portability make a significant advantage over other similar testers. Capacitive circuit with higher frequency insures better accuracy than in scoop-type meters. It s another distinguishing feature is a mode of calibration with advanced precision besides the simple general mode. Its calibration accuracy matches some elevator bench moisture meters. The running tests average is displayed by averaging capabilities. Also for the offsets customization there are many sets of grain scales registered. Testing results are shown on a wide clear multilingual digital display with bright backlight. Includes: Replacement cap (06061); Carrying hand case (06053). AgraTronix 08150 Features: Easy to operate; Measures both green and parchment coffee beans; More accurate than scoop type testers; Easy basic mode or advanced precision calibration mode to match local elevator table top moisture testers; Averaging capabilities displays running average of tests; Back light display; Higher-frequency, capacitive circuit insures accuracy; 2 year warranty. Benefits of Agratronix Coffee Tester : Accuracy; Portability; Ease of use; Multiple sets of grain scales listed for customization of offsets by the operator; Multilingual display.

Manufacturer: Agratronix Brand: AgraTronix Model: BHT-1

AgraTronix 07150 BHT-1 Baler-Mounted Hay Moisture Tester measures hay in square or round balers on the go. The backlit display is updated every 3-5 seconds so you have up-to-date moisture levels of the hay in your baler. Tests hay from 8 to 44 percent moisture and has a built-in self-calibration button. Indicator warns of moisture levels above or below the limit. Kit comes complete with display, sensor 25-ft sensor cable, water-resistant connectors and stainless steel hardware.

Manufacturer: AZ INSTRUMENTATION Brand: Reed Instruments Model: 8706-NIST

This Digital Psychrometer provides simultaneous relative humidity and air temperature readings, as well as automatically calculating wet bulb and dew point temperatures without needing to consult charts. This product includes a calibration certficate traceable to NIST (National Institute of Standards and Technology).

Manufacturer: FLIR Systems, Inc. Brand: FLIR Model: 19252-100

The IRW-4C: 4" Infrared Inspection Window is an indoor/outdoor Rugged Aluminum IR Window for safe and easy inspections. FLIR IR Windows now offer a solution to help reduce exposure so you can perform scans safely, more efficiently, and confidently while complying with NFPA 70E requirements. With PIRma-Lock tried and true locknut technology makes FLIR's IR Windows' self-grounding locking ring an IR windows first, with teeth that bite tight to the inside of the panel.

Manufacturer: FLIR Systems, Inc. Brand: FLIR Model: IRW-4S

The IRW-4S: 4" Infrared Inspection Window is an indoor/outdoor Rugged Steel IR Window for safe and easy inspections. FLIR IR Windows now offer a solution to help reduce exposure so you can perform scans safely, more efficiently, and confidently while complying with NFPA 70E requirements. With PIRma-Lock tried and true locknut technology makes FLIR's IR Windows' self-grounding locking ring an IR windows first, with teeth that bite tight to the inside of the panel.

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-CV400

The ClirVu coating - exclusive to Fluke infrared windows - seals the optic prior to assembly to protect against moisture degradation making it perfect for very hot and very cold environments.

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-1503

The Fluke high-voltage digital megohmmeter is an insulation tester with preset and adjustable test voltages for measuring insulation resistance to 1TΩ (2TΩ for 10kV models) to indicate the condition of windings or cables in motors, switchgears, electrical installations, and other insulated equipment, and it also measures leakage current to 2 milliamperes (mA), capacitance to 20μF, and AC and DC voltage to 600V, signaling when a voltage greater than 30V is detected. In addition to the preset test voltages of 250V, 500V, 1,000V, 2,500V, 5,000V, plus 10,000V for the 10kV models, test voltages can be adjusted in 50V increments to 1,000V and 100V increments above 1,000V. Its PI/DAR (polarization index/dielectric absorption rate) function automatically calculates PI and DAR, which are measurements over time that give a truer indication of insulation condition than single-point measurements. The meter can perform timed tests up to 99 minutes, adjustable in 1-minute increments, and has storage for up to 99 test results. Stored results can be uploaded to a PC with the included FlukeView Forms Basic software. The software is compatible with Microsoft Windows 2000, XP, and Vista. For improved accuracy during high-resistance testing, the guard terminal eliminates interference from leakage current. The meter has an LCD that shows the reading numerically and in a bar graph. Megohmmeters are commonly used for electrical maintenance and testing in industries such as HVAC, transportation, manufacturing, mining, and utilities, among others. The meter is rated for category (CAT) IV installations to 600V, which covers equipment at the origin of the installation, such as electricity meters and primary over-current protection equipment, and CAT III installations to 1,000V, which covers equipment in fixed installations, such as switches in the fixed installation and some industrial equipment that is permanently connected to the fixed installation. The unit has a low-battery indicator that signals when the battery needs to be r...

Manufacturer: Extech Brand: Extech Model: MO295

View larger Pinless Moisture Psychrometer + IR Thermometer The Extech MO295 is an 8-in-1 meter that combines a pin/pinless Moisture Psychrometer with a built-in infrared (IR) thermometer. This pinless moisture sensor allows users to measure moisture in various types of wood and building materials with virtually no surface damage, and the remote pin-type probe can be used for contact moisture readings in hard-to-reach areas. Comes with a pin moisture probe (MO-P1), one 9-volt battery, carrying case, and user manual. Optional specialty moisture probes are available. Features Overview The meter has an easy to read, large dual display screen with a back light feature that can be used in dimly lit areas. It simultaneously displays percentage of moisture in wood or material being tested and air temperature, IR temperature, or humidity. Pinless moisture measurements can read to a depth of 0.75-inch below the surface. The non-contact IR thermometer has an 8:1 distance to spot ratio and a 0.95 fixed emissivity. The built-in humidity and temperature probe measures relative humidity, air temperature plus grains per pound (GPP), dew point (DP), and vapor pressure. Additional Features The MO295 can store/recall 20 readings in memory, and the meter features a fast analog bargraph for viewing moisture trends, programmable high/low moisture and humidity alarms, automatic calculation of differential temperature to determine condensation point, minimum/maximum function, data hold, and an Auto Power Off function. More Extech Instruments & Accessories to Choose From MO290View larger Pinless Moisture Psychrometer + IR The Extech MO290 is an 8-in-1 meter that combines a pin/pinless Moisture Psychrometer with a built-in infrared (IR) thermometer. This pinless moisture sensor allows users to measure moisture in various types of wood and building materials with virtually no surface damage. The remote pin-type probe can be used for contact moisture readings in hard-to-reach areas. The meter has an easy to read, large d...

Manufacturer: Tramex Brand: Tramex Model: FZK5.1

A compact kit for instant and precise moisture testing of concrete and wood flooring. The Trammel CMEX II digital moisture meter allows the user to non-invasively test concrete per ASTM F2659, and the Hygro-i Relative Humidity probe for testing relative humidity, temperature and dew point in the environment, or performing ASTM F2170. The Trammel heavy-duty wood pin-probe measures the moisture content of wood. The Flooring Inspection EZ Kit comes in a Trammel Easy-travel case.