Temperature & Humidity - Page 577

Manufacturer: Thermco Brand: THERMCO

Partial and Total Immersion, Red Spirit-100 to 50C

Manufacturer: DoubleThreeus Brand: DoubleThree Color: As Shown

Name: needle type thermometerFunction: 1, the temperature range: -50 degrees C--+300 degrees C (-58 degrees F--+572 degrees F)2, resolution: 0.1 degrees C3, energy saving mode: 10 minutes automatic shutdown4, accuracy: (-20 degrees C--80 degrees C) plus or minus 1 degrees C5, the use of voltage: LR44-1.5V6, power saving: 10 minutes after the operation is not automatically shut downSize: 1, ABS shell: 80*20mm2, stainless steel tube: 106*4mmButton: 1, ON/OFF: switch function.2, C/F key: in the display temperature state, press this key can carry on the function transformation of the degree F.3, the hold button: in the temperature state, press this key can be the LCD display values remain in the hold state, in press return to detect temperature measurement, when performing the hold function, LCD display conform to hold.4, MAX/MIN key, view the maximum / minimum value.Note: show LL.L: when the sensor is in open circuit or measured value is lower than the measurement range, show HH.H: when the sensor is in a short circuit or measured value is higher than the measurement range, display LL.L.Package Includingpackage include 1*Thermometers

Manufacturer: NOSHOK, Inc. Brand: NOSHOK Model: 75-025-BRASS

Allows a temperature instrument to be removed and replaced without shutting down and possibly draining the process. Reduces the possibility of damage to the temperature instrument. Provides protection to the operator. Made of brass. 2-1/2" thread length. 1-5/8" insertion.

Manufacturer: Cole-Parmer Brand: Digi-Sense Model: AO-90433-89

To match your probe to a thermowell, first measure the distance from the probe’s tip to the top of the thread (typical thread length is 0.5" for 1/2" NPT fittings). Next, match this length to the probe depth of the thermowell (“A” dimension). Other thermowell sizes and materials are available—call our Application Specialists for more information. Limited-Space Thermowell when you need a shorter insertion depth. Standard Thermowell for general-purpose applications. Heavy-Duty Thermowell for higher fluid velocity ratings. Designed for easy replacement of your industrial probe without shutting the operation down.

Manufacturer: uvcetech Brand: uvcetech

The non-contact infrared thermometer is your best deal in a basic infrared gun. Infrared Thermometer is designed for broad general purpose use in research, industrial applications, HVAC, construction, repair or maintenance services, and even around the house if you're technically inclined. Specifications: IRT Temperature Range:-50°C~300°C / -58°F~572°F Ambient Temperature:-20~60°C(±0.5°C/1.0°F) / -4~140°F(±0.5°C/1.0°F) General Specifications: Color:Orange with black Item Size:160mmx48mmx97mm(6.3inx1.9inx3.82in) Item Net Weight:130G/0.29Ib Package Size:250mmx160mmx70mm(9.84inx6.3inx2.8in) Package Gross Weight:300G/0.66Ib Batteries:6F22 9V Batteries (batteries no inclue in this order  Features: Color Display:√ Laser Target Point(

Manufacturer: Thermco Brand: THERMCO

"ACCUSAFE" BIODEGRADABLE BLUE-SPIRIT FLUORPOLYMER-COATED - PARTIAL IMMERSION -10/50C X 0.5C

Manufacturer: Thermco Products Inc. Brand: THERMCO Model: ACC2457SSC

Thermometers are used to measure temperature for various applications such as education, general purpose QC labs and research lab testing, and for biological process monitoring.Thermco Products, Inc. manufactures test and measurement equipment such as thermometers, hydrometers, anemometers, and data loggers. The company, founded in 2007 and headquartered in Lafayette, NJ, meets International Organization for Standardization (ISO) and International Electrotechnical Commission standard ISO/IEC 17025:2005.

Manufacturer: JAMECO KITPRO Brand: JAMECO KITPRO

PID Temperature Controller KitThis is a PID (Proportional, Integral, Derivative) temperature controller. It has been designed around the ATmega328P microcontroller utilizing the Arduino Uno bootloader. NOTE: A separate Arduino board is NOT required, as this kit incorporates a basic Arduino clone. However, there are additional components required that are not included. Please preview the instructions to familiarize yourself with the project and requirements before purchasing. A PID controller works by measuring the error (difference between the "set point" (desired temp) and the "process value" (measured temp). It performs three separate calculations on that error value, the first is proportional to the size of the error, the second is the integral, which is the amount of time that the process has been in error. The third is the derivative, in which it measures the rate of change of the process value. It then calculates the sum of the previous three calculations and applies that sum as a percentage of a given window of time in the form of a pulse to a solid state relay (in the case of temperature control loops). The Arduino code for this project has been adapted with single boiler home espresso machines particularly in mind, such as the Rancilio Silvia and the Le Lit PL041QE and others, however it is easily adapted to any other heating control application, such as Sous Vide Controllers, Kiln Controllers, etc. The software for the Arduino PID controller itself consists of three main parts: the temperature reading code using the MAX31855 chip (sold separately), the PID control algorithm code, and the menu system code, which allows changing of the set point and other parameters, such as temperature offset from boiler to group head. Check out what others are saying about the PID Temperature Controller project build! Please note: Due to inventory packaging methods, you may receive

Manufacturer: Weber Brand: iDevices

This Pro Meat & Ambient Probe is specifically designed for precision temperature tracking with the iGrill 2 and iGrill mini. This heavy-duty meat probe, measures between -22 and 620 degrees Fahrenheit with a length of 48" and is designed for extreme grilling and smoking. Comes with a cord wrap that mounts perfectly on the back of your unit and snaps together with your additional probes.

Manufacturer: angel-LW-DZ-000135-2 Brand: FORWORD

100%Brand New and High Quality Here is a DS18B20 original chip,three wire temperature sensor High quality stainless steel tube encapsulation waterproof moistureproof prevent rust Stainless steel tube size:Approx.6*50mm(Diameter*Length) 9 ~ 12 adjustable resolution Power supply range:3.0V-5.5V Operating temperature range: -55°C - +125°C (-67°F - +257°F) Storage temperature range: -55°C to - 125°C (-67°F - +257°F) Accuracy over the range of -10°C to +85°C: ±0.5°C No other components, unique single bus interface Output lead:red (VCC), yellow(DATA) , black(GND) Cable length:Approx.100 cm