Temperature & Humidity - Page 586

Manufacturer: Pyle Meters Brand: Pyle Model: PIRT30 Color: pylpirt30

Get accurate temperature readings with this High-Temperature IR Thermometer with Type K Input from Pyle. Laser targeting lets you know you're getting a reading from the right object. Measure in Celsius from -50deg to 550deg or Fahrenheit from -58deg to 1,022deg degrees. In type-K mode, Celsius/Fahrenheit max is 1370deg /2498deg . Record max/min data as well as a display hold function. LCD with backlight accurately displays your reading day or night.

Manufacturer: Texas Instruments Brand: Texas Instruments

Board Mount Temperature Sensors ±1°C Remote Diode Temperature Sensor with PWM Fan Control and 5 GPIO's 24-WQFN 0 to 125

Manufacturer: Thermco Brand: THERMCO

Thermometer ASTM 59F non-mercury ASTM approved, total immersion, 303mm long Temperature range:0 to 180degree F, Divition:1.0degree F, Immersion:total, Lengh:305mm, Application: Tank, Blue Spirit This listing is for Each

Manufacturer: wef Brand: General Motors

Accuracy: ±1.5% / or ±1.5C. Resolution: 0.1C or 0.1F. Wavelength: 8-14um. Distance Spot Radio: 12:1. Response Time: 500ms (0.5 second). C/F unit selectable. Backlight ON/OFF selectable. Emissivity: 0.95Preset Laser Target Pointer ON/OFF selectable. Low battery indication. MAX, MIN, AVG, DIF Reading. Automatic data hold function. High/Low Tempterature alarm setup. Data Store/Recall Function. (12 Data Store/Recall) Auto Power Shut Off in 7 Seconds without any operation. Measurement Temperature range: -50°C-700°C ( -58°F-1292°F ). DC 9V battery operation (Battery not Included). Backlight selection, enable you see the temperature display at night.

Manufacturer: General Brand: General

General Heat-Seeker Infrared Thermometer

Manufacturer: Thermco Brand: THERMCO

Thermco's Triple Display Digital Thermometer simultaneously shows the current, minimum, and maximum temperatures and updates continuously. An audible & visual alarm will trigger when the temperatures goes above or below the set temperatures. The minimum/maximum feature monitors critical temperature for any period of time, such as overnight or weekends. To comply with regulatory agencies requirements Thermco's Time-Stamp thermometer provides the date and time when the temperature being monitored exceeds the minimum and maximum settings and in real-time. Also an audible alarm will sound and flashing LED will be visible. Each thermometer is certified, serialized and traceable to NIST in Thermco's ISO17025, (Accreditation No. 69071) Calibration Laboratory and accredited by Ilac-MRA to assure accuracy and compliance with regulatory agencies. The thermometer probe is housed in an unbreakable plastic vial filled with a Bio-Safe buffering media which maintains the thermometer reading while the refrigerator or freezer door is open. Thermometers are supplied with dual magnets and velcro sets to allow attachment to walls or doors. Other features include flip out desk stand and wall mounting key hole in back of unit, and supplied with AAA alkaline batteries.

Manufacturer: Ashcroft Inc. Brand: Ashcroft Model: 20EI60R02520/120F

Thermowells must be used on all pressure or velocity applications, to protect the stem of thermometer from corrosion and physical damage, and to facilitate removal of the thermometer without disturbing the process. Maximum ambient temperature is 200°F

Manufacturer: Ashcroft Inc. Brand: Ashcroft Model: 20EI60R02520/120F

Thermowells must be used on all pressure or velocity applications, to protect the stem of thermometer from corrosion and physical damage, and to facilitate removal of the thermometer without disturbing the process. Maximum ambient temperature is 200°F

Manufacturer: The Sensor Connection Brand: The Sensor Connection

Applications: Motor Sports, Marine, Aviation, Power Gen, Research & Development, Alternative Energy, Military The Exhaust Gas Temperature Sensor is specifically designed for use in racing, tuning, and testing applications. Made in the USA from superior materials. The Exposed Tip sensing junction provides immediate response to dynamic temperature changes.The Exhaust Gas Temperature Probe is capable of surviving extreme vibration and heat up to 2300 degrees F (1300 degrees C). The EGT probe will fit most internal combustion engine exhaust systems from approximately .750 inch diameter up to about 4 inch diameter with nominal installation modifications. The EGT probe is 0.187 diameter (4.75 mm) with a 90-degree bend to accommodate tight mounting locations. An adjustable (316 Stainless Steel) 1/8 NPT compression fitting adapter is included. All of our EGT probes are handmade in the USA

Manufacturer: Etekcity Brand: Etekcity

Laser Infrared ThermometerSimple Operation - Point and Click!This Etekcity non-contact IR temperature gun is easy to operate. It turns on and begins reading the temperature with one press of the trigger. Clear text displays the measured temperature in either Celsius or Fahrenheit. A laser light aids in aiming, and can be turned on or off. In addition, the readout display features a backlight which can be turned on if neededNOTE:1. The measuring surface is about 2cm below the infrared aiming point.2. For best accuracy, the distance between the thermometer and object of measurement shold approximately be 14.17inches (36cm)SpecificationsTemperature Range:-58℉～1022℉(-50℃～550℃)Accuracy:±2% or 2℃Distance Spot Ratio: 12:1Emissivity Adjustable: 0.95(fixed)Response Time and Wavelength: 500ms and (5-14)umRepeatability:±1% or±1℃Resolution: 0.1℃ or 0.1℉Package Contents1x Etekcity Lasergrip 1080 IR thermometer1x 9V DC battery1x User's manualLaser Distance MeasurerVersatile BuildWhether used for interior design, construction, real estate, landscaping, or sport, the Etekcity HLD40 is engineered to meet your measuring needs with six calculation functions: Area, Height (Pythagorean Theorem), Volume, Area Summation, Addition/Subtraction, and Stake Out FunctionNote: It may result "Measure Error" when background brightness is too high,which may always happen using outdoorsSpecificationsMeasuring Range:0.05-50mMeasuring Tolerance:±2.0mmMaximum Measuring Tolerance:±3.0mmLaser type: 620-690nm,