Temperature & Humidity - Page 588

Manufacturer: Thermo Scientific Brand: Oakton Model: WD-93812-04

This general purpose probe is coated in chemically resistant Teflon.

Manufacturer: The Sensor Connection Brand: The Sensor Connection

These high temperature sensors are the choice for professional racing teams, R&D test labs, and enthusiasts. The EGT probes can be used for many different applications, including... but not limited to... Karts, Drag Racing, Formula 1, NASCAR, Off Road, Snowmobiles, Aviation, and Marine Racing.The Exhaust Gas Temperature Probe is capable of surviving extreme vibration and heat up to 2300 degrees F (1300 degrees C). The EGT probe will fit most internal combustion engine exhaust systems from approximately .750 inch diameter up to about 4 inch diameter with nominal installation modifications. The EGT probe is 0.125 diameter with an adjustable (316 Stainless Steel) 1/8 NPT compression fitting adapter is included. All of our EGT probes are handmade in the USA.

Manufacturer: Cooper-Atkins Corporation Brand: Cooper Model: 52048-K

The Cooper-Atkins 52048-K Type K solid simulator probe measures temperature from -40 to +180 degrees F (-40 to +82 degrees C). This probe simulates temperature of products in a cold storage cabinet, refrigerator, freezer, or delivery truck. The probe measures 1.5" in length and 1.5" in diameter. Its temperature stabilizes within 2 hours for accurate simulation. It has a flexible 6" cable with FEP (fluorinated ethylene propylene) outer jacket. It comes with a 12" cable tie for mounting.Cooper-Atkins manufactures time, temperature, and humidity instruments for industrial, HVAC/R, health care, and food safety applications. The company, founded in 1884, is headquartered in Middlefield, CT.

Manufacturer: STMICROELECTRONICS Brand: STMicroelectronics

STMICROELECTRONICS LM335AZ TEMPERATURE SENSOR, 1C, TO-92-3

Manufacturer: Thomas Scientific Brand: Thomas Model: 4093

The Thomas Traceable Temperature/Humidity Pen measures air temperature and humidity in freezers, refrigerators, storage rooms, and laboratories. The thermometer measures temperature from 0 to 50 degrees C (32 to 122 degrees F), with an accuracy of + or - 1 degree C. The humidity gauge measures humidity from 20 to 95 percent relative humidity (RH), with an accuracy of + or - 3.5 percent. The thermometer has minimum/maximum temperature memory for monitoring the temperature consistency. The thermometer is traceable to National Institute of Standards and Technology standards, indicating that it is calibrated to International Organization for Standardization (ISO) 17025 levels. This Thomas thermometer is used to measure air temperature and humidity in restaurants, laboratories, and offices.SpecificationsPower source(1) AAA batteryTemperature range0 to 50 degrees C (32 to 122 degrees F)Temperature accuracy+ or - 1 degree CTemperature resolution0.1 degree CHumidity range20 to 95 percent RHHumidity accuracy+ or - 3.5 percent RHStandard metInternational Organization for Standardization (ISO) 17025Weight1.75 oz.Dimensions (H x W x D)6.63 x 1.25 x 0.5 inchesH is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Digital thermometers are instruments used to measure the temperature of air, liquids, or surfaces electronically. They may measure temperature in Celsius, Fahrenheit, or both. Most digital thermometers use thermistors, which are small electronic resistors. Thermistors are made out of metals that conduct electricity within a certain range and become more conductive the warmer they get. A microcontroller inside the thermometer measures this electrical conductivity and converts it to a temperature, which is displayed on an LCD. Digital thermometers are used in a wide range of applications, including in laboratory settings, food service and storage, and in doctors' offices and hospitals.Thomas Scientif...

Manufacturer: TEXAS INSTRUMENTS Brand: Texas Instruments

TEXAS INSTRUMENTS TMP302ADRLT IC, TEMP SWITCH, 6SOT

Manufacturer: FLIR Systems, Inc. Brand: Extech Model: MO290-P

Moisture Pin Probe. Dual sharp pins with 0.4"/1cm pin length. Compatible with MO290/MO295/MO297 Moisture Meters.

Manufacturer: The Sensor Connection Brand: The Sensor Connection

These high temperature sensors are the choice for professional racing teams, R&D test labs, and enthusiasts. The EGT probes can be used for many different applications, including... but not limited to... Karts, Drag Racing, Formula 1, NASCAR, Off Road, Snowmobiles, Aviation, and Marine Racing.The Exhaust Gas Temperature Probe is capable of surviving extreme vibration and heat up to 2300 degrees F (1300 degrees C). The EGT probe will fit most internal combustion engine exhaust systems from approximately .750 inch diameter up to about 4 inch diameter with nominal installation modifications. The EGT probe is 0.187 diameter (4.75 mm) with a 90-degree bend to accommodate tight mounting locations. An adjustable (316 Stainless Steel) 1/8 NPT compression fitting adapter is included. All of our EGT probes are handmade in the USA.

Manufacturer: PSG Controls, Inc. Brand: PSG Controls, Inc.

Thermometer, digital pocket, Kwik-Therm® pad, -50°F to 300°F A digital temperature indicator that has a swiveling head which makes it easy to read at any angle. It has 0.1° resolution and 1%. It updates every 15 seconds automatically and has a 1 second instant update button. Uses a standard #393 battery (included). Temperature range: -50°F to +300°F

Manufacturer: Microchip Technology Brand: Microchip Technology

Board Mount Temperature Sensors Digital Thermal