Anemometers - Page 3

Manufacturer: Fluke Corporation Brand: Fluke Model: VPS410-II-B

Fluke Corporation is the world leader in the manufacture, distribution and service of electronic test tools and software. From industrial electronic installation, maintenance and service, to calibration and quality control, Fluke tools help keep business and industry around the globe up and running.

Manufacturer: Fluke Corporation Brand: Fluke Model: BC7217

External Battery Charger, For Graphical Multimeter

Manufacturer: Amprobe Brand: Amprobe Model: TMA10A Color: Multicolored

The Amprobe TMA10A anemometer has conventional angled-arm vane with a low-friction ball bearing to measure air velocity, air flow, and air temperature, and is used by HVAC/R technicians to measure wind flow and temperature in air conditioning systems. The vane has a flexible cord for placing in hard to reach areas. Air velocity is measured in feet per minute (ft/min), and meters per second (m/s), air flow volume in cubic meters per second (CMS) and cubic feet per minute (CFM), and dual-scale thermistor temperature sensor measures temperature in F and C.The meter measures single-point air flow source for continuous moving average for up to two hours or up to eight readings for multi-point sources, and has minimum, maximum, average, and hold functions for recording data. An RS232 port exports data. The meter requires one 9V battery (included), and includes a hard-sided carrying case, and instructions.Specifications Air velocity range 125 to 4900 ft/min (0.40 to 25.00 m/s) Air velocity accuracy + or - 2 percent of full scale Air flow range 1 to 9,999 CFM (0.01 to 99.99 CMS) Air flow accuracy 0 to 9.999 CFM/CMS Air temperature range 32 to 122 degrees F (0 to 50 degrees C) Air temperature accuracy + or - 1.5 degrees F (0.8 degree C) Resolution 0.01 m/s and CMS, 1 ft/min and CFM, 0.1 degree F/C Operating environment 32 to 122 degrees F (0 to 50 degrees C) at less than 80 percent relative humidity Dimensions (main instrument) 7.1 x 2.8 x 1.4 inches (181 x 71 x 38 mm) (H x W x D) Sensor head diameter 70 mm Weight (including battery and sensor) Approximately 0.8 lb. (363g) H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Anemometers measure air speed, and in some cases airflow and air direction. They are used in field and lab applications. Amprobe manufactures electrical testing equipment for commercial, industrial, and home u...

Manufacturer: Test Products International, Inc Brand: TPI Model: 575C1

The TPI 575C1 anemometer with vane probe and telescoping hot-wire probe measures air velocity in m/s, fpm, knots, mph, and km/h and air temperature in degrees C and F, and has record, recall, and hold functions for analyzing air flow. The meter records and recalls minimum, maximum, and average readings and its data hold function freezes a reading on the display to aid documentation. For transferring and storing data directly to a PC, the meter has an output terminal for connecting to the RS-232 serial port of a compatible PC (interface cable sold separately). The LCD shows air velocity and temperature readings simultaneously. The meter has an auto power off mode that shuts it down after 10 minutes of non-use to conserve battery life and has a low-battery indicator. It complies with the Restriction of Hazardous Substances (RoHs) directive, is Underwriters Laboratories (UL) listed, and has European Conformity (CE) marking. This anemometer is used for monitoring air flow and temperature in ductwork, spray booths, and exhaust hoods, among other applications. SpecificationsAir velocity rangeVane probe: 0.4 to 25 m/s, 79 to 4,921 fpm, 0.77 to 48 knots, 0.89 to 56 mph, 1.4 to 90 km/h; Hot-wire probe: 0.2 to 20 m/s, 39 to 3,937 fpm, 0.38 to 38 knots, .44 to 44 mph, 0.72 to 72 km/hAir velocity resolution0.1 m/s; 1 fpm; 0.1 knots; 0.1 mph; 0.1 km/hAir velocity accuracyVane probe: + or - (2% of reading + 3 digits); hot-wire probe: + or - (5% of reading + 3 digits)Air temperature range-20 to 80 degrees C/ -5 to 175 degrees FOperating environment0 to 50 degrees C/32 to 122 degrees F at less than 80% relative humidityPower(6) 1.5V AAA batteries (included)Vane diameter2-3/4"Hot-wire probe lengthUp to 37"Main unit dimensions (H x W x D)144 x 74 x 29 mm/5.7 x 2.9 x 1.1 inchesWeight0.3 lb.H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Anemometers, also called wind meters, measure air veloc...

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-414D/62MAX+

FLUKE FLUKE-414D/62MAX+ FLUKE KIT WITH 414D LASER DISTANCE METER AND 62MAX+ IR THERMOMETER

Manufacturer: Fluke Corporation Brand: Fluke Model: FLK-CNX-a3000

The CNX a3000 AC Wireless Current Clamp Module is part of the Fluke team of wireless troubleshooting tools.Connect the CNX a3000 AC Wireless Current Clamp Module to your test point and view the results up to 20 meters away on the CNX Wireless Multimeter. You’ll save time with fewer run-arounds collecting multiple measurements. Use multiple modules for measurements on three-phase systems, use as a stand-alone measurement tool, or combine with other CNX modules as a system for multiple measurements. From short distances you can even view readings from modules through closed electrical panels. Plus, using the optional PC adapter, there will be no more writing down data as the CNX remote modules capture up to 65,000 sets of time stamped min/max/avg readings. CNX wireless test tools also offer increased safety by letting you view readings in a separate location from the test point. Now you can take readings on moving machinery with only the measurement module in harm’s way.Using the optional PC adapter, the CNX wireless troubleshooting system can track up to 10 measurement modules simultaneously, with results sent to a PC for further analysis.

Manufacturer: Fluke Corporation Brand: Fluke Model: BP7235

Fluke NIMH rechargeable battery pack. Provides typical 16-hour battery life when used in 700 or 740 calibrator. 6 1.2V DC Ni-MH cells in custom-molded ABS/PC-blend case. Measures 7.1-inches length by 2.2-inches width by 0.9-inches height. 1 year warranty.

Manufacturer: NK Kestrel Brand: Kestrel Model: 0850BLK Color: Black

Wind speed, humidity, barometric pressure and density altitude plus logging capabilities - the indispensable tool for portable environmental monitoring. Purchase the Kestrel 5100 Racing Weather Meter with LiNK and monitor conditions remotely and export data logs with the free Kestrel LiNK App.

Manufacturer: Kestrel Meters Brand: Kestrel Model: 0851RED

Make those last minute dial-in or turning decisions count with the Kestrel 5100. Measure weather where it really matters - at the track! Purchase the Kestrel 5100 Racing Weather Meter with LiNK and monitor conditions remotely and export data logs with the free Kestrel LiNK App.

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-FP PLUS Color: White

The Fluke FoodPro Plus dual infrared and RTD thermometer takes noncontact or contact temperature measurement and is used to monitor the temperatures of food products and foodservice equipment. This thermometer measures surface temperature from -35 to +275 degrees C (-31 to +527 degrees F) with an infrared sensor and measures internal temperatures from -40 to +200 degrees C (-40 to +392 degrees F) with a built-in fold-out resistance temperature detector (RTD) probe sensor. It has a 2.5:1 infrared distance-to-spot ratio with LED illumination for highlighting the measurement area. Go/No-Go lights indicate when food is in an unsafe temperature range (40 to 140 degrees F) to meet Hazard Analysis of Critical Control Points (HACCP) guidelines. This thermometer is used by foodservice professionals to measure food product and equipment temperatures and help detect potential food safety problems.The Fluke FoodPro Plus shows the maximum temperature for reference. The backlit display helps eliminate light reflections and improves contrast in low-light conditions. It has an integrated countdown timer and alarm to help monitor cooking and cooling intervals and food service line inspections. It is Ingress Protection certified IP54 for dust and splashing liquid and can be hand washed without submersion after use. The European Conformity (CE) marking indicates compliance with applicable European Union (EU) directives. It comes with one 9V battery, a soft case, a calibration certificate with National Institute of Standards and Technology (NIST) traceability and the German Calibration Service (Deutscher Kalibrierdienst, DKD) traceability, and instructions. SpecificationsInfrared temperature range-35 to +275 degrees C (-31 to +527 degrees F)Infrared sensor accuracy0 to 65 degrees C (32 to 150 degrees F): + or - 1 degree C (+ or - 2 degrees F); above 65 degrees C (150 degrees F): + or - 1.5% of the reading; below 0 degrees C (32 degrees F): + or - 1 degree C (+ or - 2 degrees F) + or - 0.1 degreeDistance-to-spot ratio2.5:1Infrared se...