|
|
-
3.7 of 5.0 with 30 Reviews
SALE PRICE: $140.00 1% OFF
Manufacturer: Particles Plus, Inc.
Brand: Particles Plus
Model: EE-80123A
Manufacturer: Particles Plus, Inc.
Brand: Particles Plus
Model: EE-80123A
The PID cleaning Kit and removal tool provides for customer capability to clean, service and replace their tvoc sensor in the field.
-
3.7 of 5.0 with 4 Reviews
SALE PRICE: $145.79 20% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLUKE-61
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLUKE-61
|
The Fluke 61 infrared thermometer takes noncontact temperature measurements and is used for monitoring electrical, HVAC, and automotive systems. It measures temperature from -18 to +275 degrees C (0 to 525 degrees F) with an accuracy of + or -2% of the reading or + or - 2 degrees C (+ or -3.5 degrees F), whichever is greater from -1 to +275 degrees C (30 to 525 degrees F) and + or - 3 degrees C (+ or -5 degrees F) outside this range. It has an 8:1 infrared distance-to-spot ratio with laser sighting for pinpointing the measurement area. The backlit display helps eliminate light reflections and improves contrast in low-light conditions. The thermometer enters sleep mode after seven seconds of inactivity to help preserve battery life. The European Conformity (CE) marking indicates compliance with applicable European Union (EU) directives. This thermometer is suitable for measuring the temperature of equipment, systems, and processes in electrical, HVAC (heating, ventilation, and air conditioning), mechanical, and automotive environments.SpecificationsTemperature range-18 to +275 degrees C (0 to 525 degrees F)Infrared sensor accuracyFrom -1 to +275 degrees C (30 to 525 degrees F): + or - 2% of the reading or + or - 2 degrees C (+ or - 3.5 degrees F), whichever is greater; From -18 to -1 degree C (0 to 30 degrees F) + or - 3 degrees C (+ or - 5 degrees F)Display resolution2 degrees C / 5 degrees FDistance-to-spot ratio8:1Power Supply9V or NiCd batteryWeight227g / 0.5lb.Dimensions184 x 45 x 38mm / 7.25 x 1.75 x 1.5 inches (H x W x D)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Digital infrared thermometers measure the temperature of surfaces from a distance. They may measure temperature in Celsius, Fahrenheit, or both. Infrared (IR) thermometers work by focusing the infrared radiation emitted by a surface onto a detector called a thermopile. The thermopile turns the heat into electricit...
-
3.7 of 5.0 with 15 Reviews
SALE PRICE: $149.00 1% OFF
Manufacturer: STANDARD INSTRUMENTS CO LTD
Brand: Reed Instruments
Model: R3002
Manufacturer: STANDARD INSTRUMENTS CO LTD
Brand: Reed Instruments
Model: R3002
This digital manometer provides accurate measurements in 11 different units of measure and is capable of taking gauge and differential pressure. The R3002 features a large backlit LCD display, an integrated clock to keep track of measurements and the ability to record and revisit recorded data via the included software.
-
3.7 of 5.0 with 6 Reviews
SALE PRICE: $149.90
Manufacturer: Gain Express Holdings Ltd.
Brand: Gain Express
Model: A017755
Manufacturer: Gain Express Holdings Ltd.
Brand: Gain Express
Model: A017755
|
This meter notify CO2 level, Air Temperature, Dew Point (DP), Wet Bulb Temperature (WB) and Humidity (RH) and is an ideal instrument for Indoor Air Quality (IAQ) diagnosis. Features: Backlight, Hold data, Min/Max Dual power source, battery (inlcuded) or 9V adaptor (**note: adaptor is not included on set). Power from battery is automatically cut off when 9V adaptor is in use Easy manual calibration on CO2 and humidity PC connection for on-line loggin and data analysis (not included on set) Manual calibration of CO2 and Humidity is available Auto / Manual power off Specifications: Measuring Range * CO2: 0~9999ppm (2001~9999 out of scale) * Temperature : -10~60°C (14~140°F) * Humidity : 0.1% ~ 99.9%RH * Dew Point : -20.0~59.9°C * Wet Bulb : -5.0~59.9°C * Temp : ±0.6°C / ±0.9°F Accuracy : * C02 : ±50ppm ±5% of reading (0~2000ppm) other ranges are not specified * Temp : ±0.6°C / ±0.9°F * Humidity : ±3%RH (at 25°C, 10~90% RH); ±5%RH (at 25°C, others) Response time * CO2 :
-
3.7 of 5.0 with 8 Reviews
SALE PRICE: $150.00
Manufacturer: Dwyer Instruments, Inc.
Brand: Dwyer
Manufacturer: Dwyer Instruments, Inc.
Brand: Dwyer
The Series 478A manometer can be used to measure positive, negative, or Differential Pressures. The unit features selectable units, auto zero, hold and a Min/Max function. Press the Hold key to freeze the current pressure measurement on the display. The 478A manometer includes a zeroing button to null out any minor pressure differences.
-
3.7 of 5.0 with 13 Reviews
SALE PRICE: $168.00 1% OFF
Manufacturer: GUB
Brand: Unknown
Manufacturer: GUB
Brand: Unknown
|
Product advantages 1 Real-time monitoring Latest TVOC sensor technology, real-time and accurate reporting dynamic change 2 Digital Display Display precise monitoring result with large LCD screen 3 Intelligent Warning Set alarm threshold according to GB, excessive warning by sound, light and face graph. 4 Feature-rich Temperature and humidity monitoring and clock function , a machine with variety function ,convenient and practical. Parameter Name: TVOC-air quality monitor Model: BGAM-02 Display: LCD screen display, white backlight Monitoring methods: Automatic Power supply: Built-in lithium battery Host weight: 180 g Dimensions: 120 * 105* 65mm TVOC detection range: 0 ~ 9.99mg/m3 or 0 ~ 5ppm accuracy: ± 5% Resolution: 0.01mg/m3 or0.01ppm Humidity measuring range: 20% to 90% accuracy: ± 5% RH Temperature detection range: 0 ℃ ~ 50 ℃ Accuracy: ± 1 ℃ Battery working time: ≥ 16h Voltage: DC5V, 500MA Response time: 1 second Alarm mode: sound and light alarm
-
3.7 of 5.0 with 39 Reviews
SALE PRICE: $175.00 1% OFF
Manufacturer: Dwyer Instruments, Inc.
Brand: Dwyer
Manufacturer: Dwyer Instruments, Inc.
Brand: Dwyer
SERIES 160F PITOT TUBES are ideal for use with our precision air velocity gages, transmitters and digital test instruments. The Series 160F Pitot Tubes are constructed from corrosion resistant stainless steel for a lifetime of service. Permanent, stamped insertion depth graduations on sides of the Series 160F Pitot facilitate accurate positioning. Static pressure port is parallel to sensing tube allowing quick, easy alignment of tube with the air flow. Straight design allows for easy insertion into ducts through grills and pressure taps as well as aids in positioning in hard to reach locations where a hook style Pitot tube may not allow access. (Picture shows standard size).
-
3.7 of 5.0 with 33 Reviews
SALE PRICE: $190.00 1% OFF
Manufacturer: Dwyer Instruments, Inc.
Brand: Dwyer
Manufacturer: Dwyer Instruments, Inc.
Brand: Dwyer
|
Dwyer® Series CDT Carbon Dioxide and Temperature Transmitters accurately monitor the CO2 concentration and temperature in schools, office buildings, and other indoor environments to help achieve LEED® certification. For increased sensor life, a single-beam dual-wavelength non-dispersive infrared (NDIR) sensor is used to automatically correct the measurement in both occupied and unoccupied buildings against aging effects. The singlebeam dual-wavelength sensor technology provides the highest level of accuracy compared to Automatic Baseline Correction methods which can unintentionally shift the calibration based on CO2 levels and barometric pressure conditions. In order to achieve a higher level of accuracy, the Series CDT includes digital barometric pressure adjustment and the ability to field-calibrate the sensor. Universal outputs allow users to select the transmitter output to be 4 to 20 mA, 0 to 5 VDC, or 0 to 10 VDC to work with virtually any building management controller. An optional relay with user adjustable set points can be used to control exhaust fans, open actuated windows or dampers, or signal a light or horn.The display can be configured to display temperature only, CO2 only, or CO2 and temperature together. Single beam dual-wavelength sensor advantages: Automatically corrects for aging effects in occupied and unoccupied buildings (perfect for hospitals and manufacturing plants that are occupied 24 hours per day). Measures actual unfiltered light intensity directly (Eliminates error from incorrect assumptions of gas concentration in theoretical logic assumption methods).
-
3.7 of 5.0 with 19 Reviews
SALE PRICE: $194.25 1% OFF
Manufacturer: Dwyer Instruments, Inc.
Brand: Dwyer
Manufacturer: Dwyer Instruments, Inc.
Brand: Dwyer
|
Dwyer® Series CDT Carbon Dioxide and Temperature Transmitters accurately monitor the CO2 concentration and temperature in schools, office buildings, and other indoor environments to help achieve LEED® certification. For increased sensor life, a single-beam dual-wavelength non-dispersive infrared (NDIR) sensor is used to automatically correct the measurement in both occupied and unoccupied buildings against aging effects. The singlebeam dual-wavelength sensor technology provides the highest level of accuracy compared to Automatic Baseline Correction methods which can unintentionally shift the calibration based on CO2 levels and barometric pressure conditions. In order to achieve a higher level of accuracy, the Series CDT includes digital barometric pressure adjustment and the ability to field-calibrate the sensor. Universal outputs allow users to select the transmitter output to be 4 to 20 mA, 0 to 5 VDC, or 0 to 10 VDC to work with virtually any building management controller. An optional relay with user adjustable set points can be used to control exhaust fans, open actuated windows or dampers, or signal a light or horn.The display can be configured to display temperature only, CO2 only, or CO2 and temperature together. Single beam dual-wavelength sensor advantages: Automatically corrects for aging effects in occupied and unoccupied buildings (perfect for hospitals and manufacturing plants that are occupied 24 hours per day). Measures actual unfiltered light intensity directly (Eliminates error from incorrect assumptions of gas concentration in theoretical logic assumption methods).
-
3.7 of 5.0 with 4 Reviews
SALE PRICE: $199.00
Manufacturer: AZ Instruments
Brand: CO2Meter
Model: 92-KNZV-KG3E
Color: Yellow
Manufacturer: AZ Instruments
Brand: CO2Meter
Model: 92-KNZV-KG3E
Color: Yellow
With up to 24 hours battery life and easy to use with gloves on, the pSense portable carbon dioxide and air quality meter works perfectly as a personal safety alarm unit in hazardous environments, or wherever carbon dioxide is produced, stored, generated and used. The large LCD readout gives a quick overview of the current carbon dioxide level 0-9,999ppm, and the 80 dB audible alarm calls for prompt attention when the short-term exposure safety limit is exceeded. The meter calculates statistical weighted averages of TWA (8 hour time weighted average) and STEL (15 minute short term exposure limit). The pSense comes with a shatter-resistant ABS carrying case, 4 AA batteries, universal 110/220V power supply and manual.
|
|