Airflow & Air Quality - Page 12

Manufacturer: AZ INSTRUMENTATION Brand: REED Instruments Model: 8906-NIST

This professional grade thermo-anemometer provides accurate air velocity, air volume and air temperature measurements. The 8906 is capable of taking continuous air velocity averaging measurements for up to 2 hours and features a low friction rotary vane for improved accuracy and the ability to simultaneous display air velocity and temperature on the large dual LCD display. This product includes a calibration certficate traceable to NIST (National Institute of Standards and Technology).

Manufacturer: NK Kestrel Brand: Kestrel Model: 0855LVYEL

Measure every environmental condition plus wind direction and automatic crosswind calculation. Purchase the Kestrel 5500 Weather Meter with LiNK + Vane Mount and monitor conditions remotely and export data logs with the free Kestrel LiNK App. Add a tripod vane mount for a complete, compact, portable weather station.

Manufacturer: Fluke Corporation Brand: Fluke Model: I310S

The i310s current probe is based on hall effect technology for use in measurement of both DC and AC current. The i310s may be used in conjunction with oscilloscopes and other suitable recording instruments for accurate non-intrusive current measurement. Current ranges: 30A and 300A AC rms or +/-45A and 450A DC. Measuring Ranges: +/-45A and 450A DC. Output Sensitivity: 10 mV/A (40A) to 1 mV/A (400A). Resolution: +/-50 mA (40A) to +/-100 mA (400A). Load impedance: greater than 10 k Ohms and less than or equal to 100 pF. Frequency range (small signal): DC to 20 kHz (- 3 dB). Phase shift below 1 kHz, less than 2 degrees. Temperature coefficient: +/-0.1 percent of reading / degree C. Power Supply: 9V Alkaline, MN1604/PP3. Battery life: 30 hours, low battery indicator. Inrush current: 600A AC rms maximum. Accuracy (at +23 degree C): (30A range) +/-1 percent of reading +/-50 mA, (300A range) +/-1 percent of reading +/-300 mA. Bandwidth to meet accuracy specification: 1 kHz. Conductor position sensitivity: +/-1.5 percent relative to centre reading. Working voltage: 300V AC rms or DC. Maximum conductor size: 19mm diameter. Output connection: safety BNC connector, supplied with safety 4mm adaptor. Output zero: manual adjust via thumbwheel. Cable length: 2m. Operating temperature range: -10 to +50 degree C. Storage temperature range (with battery removed): -20 to +85 degree C. Operating humidity: 15 to 85 percent (non-condensing). EMC Standards: BS EN 61236 1998 +A1, A2, and A3.

Manufacturer: Extech Instruments Brand: Extech Model: 407910-NIST

Heavy Duty Differential Pressure Manometer that features a wide-range (0 to 29psi) with 8 Selectable Units of Measure. This product is NIST Certified which indicates that the product is traceable to standards provided by the National Institute of Standards and Technology (NIST).

Manufacturer: NK Kestrel Brand: Kestrel Model: 0857SBRN

Get the "science of accuracy" with Applied Ballistics! The ideal tool for shot distances within 800 yards, the Sportsman incorporates the Applied Ballistics G1/G7 solver to deliver highly accurate solutions for long-range hunters and shooters. Includes a tripod vane mount for a hands-free portable weather station. Connects via LiNK to compatible laser range finders and to the Kestrel Applied Ballistics app for remote viewing and more.

Manufacturer: Fluke Corporation Brand: Fluke Model: PV350

The PV350 pressure/vacuum transducer module (the module) measures gauge pressure; the difference between atmospheric (barometric) pressure and the pressure (or vacuum) applied to the pressure port on the transducer. It then converts that measurement to 1 mV dc per unit. A module and a high-performance digital multimeter (DMM) with min/max function become a data logger capable of measuring peak high and peak low. The PV350 is compatible with industrial gases and liquids that are compatible with 316 stainless steel. To determine the compatibility of a liquid or gas, refer to the manufacturer's specifications. When making measurements on more than one type of pressure system, make sure the fluids or gases in those systems are compatible. If they are not, contamination or damage to the system being measured may result. Battery: standard 9 V battery (NEDA #1604, 6F22, 006P). Battery life: 300 hours (typical) for carbon-zinc 400 hour (typical) for Alkaline. Vibration: 3 g at 55 Hz sinusoidal. Shock: 1 meter drop. Electrical cable: black PVC, will withstand up to 105 degree C. Cable length: 8'. Pressure port connection: 1/4" NPT. Connector: brass 1/4" male flare to 1/4" female pipe thread. Pressure range: 350 to 500 psig (2413 to 3447 kPa), accuracy: +/-5 percent of reading +/-1 psig typical (+/-5 percent +/-7.0 kPa) Vacuum range: 0 to 29.9" Hg (0 to 76 cm-Hg), accuracy: +/-1 percent of reading +/-0.5 in-Hg (+/-1 percent of reading +/-1.3 cm-Hg). Output: 1 mV per unit (psi, kPa, cm-Hg or in-Hg). Resolution: 0.1 psi/in-Hg in mV range, 1 psi/in-Hg in volt range with 3-1/2 or 4-digit meters. RFI Specification: Typically less than 1 percent error from 14 kHz to 30 MHz at 1 V/M. Meter input impedance: greater than or equal to 10 M ohms. Maximum working pressure: 500 psi. Burst pressure: 1000 psi. Storage temperature: -51 to 71 degree C.

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-1503

The Fluke high-voltage digital megohmmeter is an insulation tester with preset and adjustable test voltages for measuring insulation resistance to 1TΩ (2TΩ for 10kV models) to indicate the condition of windings or cables in motors, switchgears, electrical installations, and other insulated equipment, and it also measures leakage current to 2 milliamperes (mA), capacitance to 20μF, and AC and DC voltage to 600V, signaling when a voltage greater than 30V is detected. In addition to the preset test voltages of 250V, 500V, 1,000V, 2,500V, 5,000V, plus 10,000V for the 10kV models, test voltages can be adjusted in 50V increments to 1,000V and 100V increments above 1,000V. Its PI/DAR (polarization index/dielectric absorption rate) function automatically calculates PI and DAR, which are measurements over time that give a truer indication of insulation condition than single-point measurements. The meter can perform timed tests up to 99 minutes, adjustable in 1-minute increments, and has storage for up to 99 test results. Stored results can be uploaded to a PC with the included FlukeView Forms Basic software. The software is compatible with Microsoft Windows 2000, XP, and Vista. For improved accuracy during high-resistance testing, the guard terminal eliminates interference from leakage current. The meter has an LCD that shows the reading numerically and in a bar graph. Megohmmeters are commonly used for electrical maintenance and testing in industries such as HVAC, transportation, manufacturing, mining, and utilities, among others. The meter is rated for category (CAT) IV installations to 600V, which covers equipment at the origin of the installation, such as electricity meters and primary over-current protection equipment, and CAT III installations to 1,000V, which covers equipment in fixed installations, such as switches in the fixed installation and some industrial equipment that is permanently connected to the fixed installation. The unit has a low-battery indicator that signals when the battery needs to be r...

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-CV400

The ClirVu coating - exclusive to Fluke infrared windows - seals the optic prior to assembly to protect against moisture degradation making it perfect for very hot and very cold environments.

Manufacturer: Kanomax Brand: Kanomax Model: 6036-0E

Kanomax Anemomaster professional multi-function thermal anemometer with telescopic and articulating tip probe. Air velocity - range: 2 to 6000 FPM, accuracy: +/-3 Percent of reading or 0.015 m/s whichever is greater. Volumetric flowrate - imperial: 9031 CFM (at 20 FPM), 2709360 CFM (at 6000 FPM) and metric: 2341 cu. m/s (at 0.1 m/s) and 702270 cu. m/s (at 30.0 m/s). Duct size: 0 to 255 inches. Temperature - range: -4 to 158 degrees F, accuracy: +/-1 degrees F or +/-0.5 degrees C. Data storage capacity: up to 1500 records. Power supply: 6 x AA batteries or AC adapter. Digital interface: USB and RS232C (for print-out). Telescopic probe - 39.4-inches length, 15/64-inches tip diameter, 15/32-inches base diameter. 3.543 inches articulating section length.

Manufacturer: Extech Instruments Brand: Extech Model: PS115-NIST

Differential pressure manometer that features a 15psi measurement range. This product is NIST Certified which indicates that the product is traceable to standards provided by the National Institute of Standards and Technology (NIST).