Airflow & Air Quality - Page 3

Manufacturer: Dwyer Instruments Brand: Dwyer Model: VFA-24-BV

The Dwyer Visi-Float series VFA flowmeter is a 2" scale air flow meter with 1/8" female NPT inlet and outlet connections for inline monitoring and measuring of air flow with an accuracy of + or – 5% of full scale, and is precision machined from solid acrylic plastic to resist breakage and provide a clear view of the scale. Black scale graduations are hot-stamped into the plastic for distinct readings. This lightweight flowmeter has a metal mounting insert for panel mounting and can also be supported directly by system piping. Models are available for measuring air flow in scfh or lpm. Some models come with a brass or stainless steel metering valve for precise adjustment of air flow. Inlet and outlet connections are brass except for models with stainless steel wetted parts and the connections are on the back of the flowmeter except for models that have end connections. This flowmeter is commonly used for measuring air flow in medical equipment, air samplers, gas analyzers, pollution monitors, chemical injectors, and cabinet purging equipment, among other devices.SpecificationsScale length2" (on average)Accuracy+ or – 5% of full scaleConnections1/8" female NPT inlet and outletPressure and temperature ratingWithout valve: 100 psig/6.9 bar @ 65 degrees C/150 degrees F; with valve: 100 psig/6.9 bar @ 48 degrees C/120 degrees FWetted materialsBody: acrylic plastic; O-ring: Buna-N; metal parts: brass (standard) or stainless steel (applicable models); float (varies by range): black glass, nickel/copper alloy, stainless steel, or aluminumDimensions (H x W x D)104.0 x 25.40 x 31.75 mm/4-3/32 x 1 x 1-1/4 inchesWeight0.11 to 0.14 kg/4.0 to 4.8 oz.H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Anemometers, also called wind meters, measure air velocity and are most commonly used for weather monitoring to determine wind speed and for HVAC applications to determine air flow within du...

Manufacturer: Turbo Torch Brand: ESAB Model: 0386-0849 Color: Multicolored

The Turbo Torch 0386-0849 NFM-TT Nitrogen Flow Meter provides precision gas flow control for nitrogen-purging applications. Use with any nitrogen-purging regulator equipped with a 7/16" - 20 male flare to outlet to control the flow of nitrogen gas through copper tubing while brazing. Purging copper lines with nitrogen during brazing prevents internal oxidization and scale build-up. Features Outflow of 0 to 75 SCFH (Standard Cubic Feet per Hour) and 0 to 35 LPM (Liters Per Minute) Brass body construction Standard HVAC female flare inlet fitting and male flare outlet fitting Max inlet pressure 50 PSIG Over-pressure safety relief valve Excellent accessory to the Turbo Torch Nitrogen Purge Kit and Nitrogen Purge Regulator.

Manufacturer: CTC Brand: Supco Model: 62152P Color: White

5/2 Programmable Thermostat, Hardwire or Battery Powered, Permanent memory retains settings, compressor short cycle protection. Professional Series CTC thermostats feature attractive styling, overheat protection and static protection.

Manufacturer: Fluke Corporation Brand: Fluke Model: AC72

The Fluke alligator clip-set of red and black clips have a pair of nickel plated jaws. The jaws have an 8mm (0.32") opening. Recommended for use with TL71 and TL75 test leads, they are CAT IV 600V, CAT III 1000V, 10A rated and UL listed. The over-molded surfaces and finger-hugging curves give the user a comfortable, reliable grip and improves steadiness in slippery hands. UL listed. The Fluke alligator clips are sold as one set per package.

Manufacturer: Fluke Corporation Brand: Fluke Model: PM9082/001

One red (signal) and one black (ground) 4mm banana contact. Consists of two adapters. Maximum signal voltage: 600V rms. Maximum voltage to ground: 600V rms. CAT III per IEC 61010-031. UL Listed.

Manufacturer: NK Kestrel Brand: Kestrel Model: 0782 Color: Black

The Kestrel Portable Vane Mount is the ultimate Kestrel accessory for everyone who needs accurate wind speed and directional data, including artillery specialists and weekend hobby shooters. It is an ingeniously simple accessory designed for extreme light weight and portability. The Kestrel Portable Vane Mount can be coupled with any Kestrel 5000 series meter, including a Kestrel 5500, which creates a data logging weather station capable of tracking changes in the wind direction and speed, then tracking them with your data point memory log. The Vane Mount attaches easily to the Kestrel Portable Tripod (or any tripod) to add directional measurement capabilities to your Kestrel Meter and create a complete, hands-free weather station you can easily pack into remote locations. Together, the Kestrel 5500 and Vane Mount weigh less than 8 ounces (227 g.) and pack into a compact 2 x 6 inch (5 x 15.25 cm) case. The Vane Mount comes with a zippered padded case that holds extra batteries, the mount and your Kestrel meter. This kit is made in the USA and backed by our 5-year warranty.

Manufacturer: Fluke Corporation Brand: Fluke Model: PM9081/001

Dual banana plug 4mm male to female BNC adapter. Consists of two adapters. Maximum signal voltage: 300V rms. Maximum voltage to ground: 600V rms. CAT III per IEC 61010-031.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: MM-80

The Dwyer Mark II MM-80 inclined differential manometer with red gauge fluid has a 0 to 80 mmH2O measuring range, built in zero level and molded plastic case for monitoring air velocity and air filter performance, and taking pressure measurements above and below atmospheric pressure. Red gage fluid is freeze-proof and has lower evaporation rate for use in cold environments, and produces expanded scale viewing for improved reading resolution. The built-in zero level provides linear calibration. The manometer has a styrene-acrylonitrile housing, indicating tube, and fluid wells for strength and durability. The molded ABS knobs and zero adjust plunger and shock-mounted glass level vial are wear-resistant. Leakproof O-ring seals and overflow tank reduce the risk of fluid loss. Scales are lithograph printed on aluminum to ease reading, and are epoxy coated to protect against wear. The manometer can be mounted on any vertical surface. SpecificationsPressure typesSingle and differentialMedia typeAirCase materialStyrene-acrylonitrileMeasuring range0 to 80 mmH2OFluid typeRed gauge fluid, 0.826 sp. gr.MountStand and vertical mountAccuracy+ or - 3% full scaleMaximum pressure10 psi/70 kPaMaximum temperature140 degrees F/60 degrees CWeight1.04 lbs./472gDimensions5-29/32 x 7-13/32 x 2-1/4inches (H x W x D)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Manometers measure the pressure of a liquid or gas. They are used in laboratory, medical equipment, engineering, automotive, and heating, ventilation, and air-conditioning applications. Manometers measure any combination of gauge, absolute, or differential pressures. Gauge pressure is the amount of pressure in a system relative to the ambient pressure, absolute pressure is the amount of pressure in a system relative to an absolute vacuum, and differential pressure is the difference between two pressures. Analog manometers are composed of columns of ...

Manufacturer: Dwyer Instruments Brand: Dwyer Model: VFA-24-SSV

The Dwyer Visi-Float series VFA flowmeter is a 2" scale air flow meter with 1/8" female NPT inlet and outlet connections for inline monitoring and measuring of air flow with an accuracy of + or – 5% of full scale, and is precision machined from solid acrylic plastic to resist breakage and provide a clear view of the scale. Black scale graduations are hot-stamped into the plastic for distinct readings. This lightweight flowmeter has a metal mounting insert for panel mounting and can also be supported directly by system piping. Models are available for measuring air flow in scfh or lpm. Some models come with a brass or stainless steel metering valve for precise adjustment of air flow. Inlet and outlet connections are brass except for models with stainless steel wetted parts and the connections are on the back of the flowmeter except for models that have end connections. This flowmeter is commonly used for measuring air flow in medical equipment, air samplers, gas analyzers, pollution monitors, chemical injectors, and cabinet purging equipment, among other devices.SpecificationsScale length2" (on average)Accuracy+ or – 5% of full scaleConnections1/8" female NPT inlet and outletPressure and temperature ratingWithout valve: 100 psig/6.9 bar @ 65 degrees C/150 degrees F; with valve: 100 psig/6.9 bar @ 48 degrees C/120 degrees FWetted materialsBody: acrylic plastic; O-ring: Buna-N; metal parts: brass (standard) or stainless steel (applicable models); float (varies by range): black glass, nickel/copper alloy, stainless steel, or aluminumDimensions (H x W x D)104.0 x 25.40 x 31.75 mm/4-3/32 x 1 x 1-1/4 inchesWeight0.11 to 0.14 kg/4.0 to 4.8 oz.H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Anemometers, also called wind meters, measure air velocity and are most commonly used for weather monitoring to determine wind speed and for HVAC applications to determine air flow within du...

Manufacturer: Dwyer Instruments Brand: Dwyer Model: VFA-21-SSV

The Dwyer Visi-Float series VFA flowmeter is a 2" scale air flow meter with 1/8" female NPT inlet and outlet connections for inline monitoring and measuring of air flow with an accuracy of + or – 5% of full scale, and is precision machined from solid acrylic plastic to resist breakage and provide a clear view of the scale. Black scale graduations are hot-stamped into the plastic for distinct readings. This lightweight flowmeter has a metal mounting insert for panel mounting and can also be supported directly by system piping. Models are available for measuring air flow in scfh or lpm. Some models come with a brass or stainless steel metering valve for precise adjustment of air flow. Inlet and outlet connections are brass except for models with stainless steel wetted parts and the connections are on the back of the flowmeter except for models that have end connections. This flowmeter is commonly used for measuring air flow in medical equipment, air samplers, gas analyzers, pollution monitors, chemical injectors, and cabinet purging equipment, among other devices.SpecificationsScale length2" (on average)Accuracy+ or – 5% of full scaleConnections1/8" female NPT inlet and outletPressure and temperature ratingWithout valve: 100 psig/6.9 bar @ 65 degrees C/150 degrees F; with valve: 100 psig/6.9 bar @ 48 degrees C/120 degrees FWetted materialsBody: acrylic plastic; O-ring: Buna-N; metal parts: brass (standard) or stainless steel (applicable models); float (varies by range): black glass, nickel/copper alloy, stainless steel, or aluminumDimensions (H x W x D)104.0 x 25.40 x 31.75 mm/4-3/32 x 1 x 1-1/4 inchesWeight0.11 to 0.14 kg/4.0 to 4.8 oz.H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Anemometers, also called wind meters, measure air velocity and are most commonly used for weather monitoring to determine wind speed and for HVAC applications to determine air flow within du...