|
|
-
4.7 of 5.0 with 8 Reviews
SALE PRICE: $352.10 12% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: 2075004
Manufacturer: Fluke Corporation
Brand: Fluke
Model: 2075004
|
The Fluke 83 Series V Industrial Digital Multimeter is an average responding-RMS indicating digital multimeter (also known as a multitester) for measuring AC/DC voltage up to 1,000V, AC/DC current to 10 amp (20 amp for a maximum of 30 seconds), frequency to 200KHz, resistance to 50 megaohms, and capacitance to 9,999 microfarads and includes continuity and diode tests. The 6,000-count resolution, 3-3/4 digit digital display is backlit for readability in low-light conditions and includes an analog bar graph which updates 40 times per second which is useful for making peak and null adjustments and for observing rapidly changing inputs. The meter has Min./Max.-Average recording as well as a Min./Max. Alert to automatically capture variations. A duty cycle indicates the percentage of time a signal is above or below the trigger level during one cycle and a peak capture function detects intermittent problems and transients as low as 250 microseconds. The meter has both manual- and auto-ranging modes for user flexibility and a hold function to capture readings. This meter is safety rated for Category III up to 1,000V and Category IV up to 600V and can withstand hazardous volt spikes in excess of 8,000V to reduce risks of spikes and surges caused by load switching and faults on industrial circuits. It uses a 9V battery (installed) that has a battery life of approximately 400 hours without backlight and has a selectable sleep mode to maximize battery life. The meter measures 18.6 x 8.6 x 3.1 cm (H x W x D) and weighs 22 oz./624 g. (H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.) This meter includes a removable holster with built-in test lead and probe storage. Multimeters are electrical test meters that measure multiple properties of an electrical circuit, such as current, voltage, resistance, capacitance, and continuity. Available in handheld or benchtop models, multimeters diagnose electri...
-
4.7 of 5.0 with 4 Reviews
SALE PRICE: $354.20 1% OFF
Manufacturer: UEI Test Instruments
Brand: UEi Test Instruments
Model: DMG200
Manufacturer: UEI Test Instruments
Brand: UEi Test Instruments
Model: DMG200
Founded in Vancouver, BC in 1946, UEi Canada Inc. is a leading distributor of portable testing and measuring equipment for the HVAC and Electrical industry. In 1987, UEi Canada joined the Kane Group of companies with sister companies in England and United States.
-
4.7 of 5.0 with 18 Reviews
SALE PRICE: $359.00
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: 350-AF
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: 350-AF
Dwyer Durablock Series 250-AF Gages are precision machined 1" thick solid acrylic plastic, virtually unbreakable and free of distortion. The fluid bore is precision drilled to ±.0002" to assure life long accuracy. A glass spirit level is built into the body and encapsulated to prevent damage or tampering. The scale is mirror polished chrome plated brass to assure parallax free reading by alignment of the meniscus with its reflection. Safety traps are incorporated in the body to prevent loss of fluid due to pressure surges. Red and green signal flags indicate clearly when a filter change is necessary. Gages are suitable for use in ambient temperatures of -20 to 150°F. Connection fittings are positively sealed by "O" rings but easily removed for zeroing or addition of fluid. Furnished complete with instructions.
-
4.7 of 5.0 with 22 Reviews
SALE PRICE: $380.00
Manufacturer: Kanomax
Brand: Kanomax
Model: VNUB
Manufacturer: Kanomax
Brand: Kanomax
Model: VNUB
Kanomax NMHC isobutylene module. 0 to 25 ppm Range. +/-10 percent Accuracy. 0.1 ppm Resolution.
-
4.7 of 5.0 with 36 Reviews
SALE PRICE: $382.49 1% OFF
Manufacturer: Fluke
Brand: Fluke
Model: 4112976
Manufacturer: Fluke
Brand: Fluke
Model: 4112976
Models covered: • Fluke 88 V Deluxe Automotive Multimeter • Fluke 179 True RMS Digital Multimeter.
-
4.7 of 5.0 with 40 Reviews
SALE PRICE: $418.79
Manufacturer: UEI Test Instruments
Brand: UEi Test Instruments
Model: DAFM4
Manufacturer: UEI Test Instruments
Brand: UEi Test Instruments
Model: DAFM4
0.7 inch diameter vane head with 39 inch long telescopic & scale marked probe - mini vane probe with built-in temperature & rh sensor - up to 1 hour accumulative average - metric & Imperial scales - handheld size, easy to carry - in-duct or grill surface measurements - low battery indication - fast, accurate response.
-
4.7 of 5.0 with 36 Reviews
SALE PRICE: $449.99 11% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: 2540548
Manufacturer: Fluke Corporation
Brand: Fluke
Model: 2540548
Fluke 1 A AC/DC power shunt.
-
4.7 of 5.0 with 12 Reviews
SALE PRICE: $467.00 1% OFF
Manufacturer: Dwyer Instruments, Inc.
Brand: Dwyer
Manufacturer: Dwyer Instruments, Inc.
Brand: Dwyer
|
The Dwyer® Series 475 Mark III Handheld Digital Manometer is ideal for field calibration, monitoring or trouble shooting HVAC systems, clean rooms, or a wide range of other low pressure pneumatic systems. This handy instrument measures positive, negative, or Differential Pressures of air and natural gases in ranges from 1" w.c. (0.249 kPa) to 150 psid (10.34 bar). The Series 475-FM is approved and is instrinsically safe for hazardous locations, Class 1, Div. 1, Group A, B, C, D, T4. Its simple operation and easy to read digital display make it an indespensable test instrument for the plant engineer, industrial hygienist and HVAC technician. When used with a Dwyer® Pitot tube, the Series 475 Mark III can also be used as an air velocity gage. The Series 475-FM Mark III is housed in a durable extruded aluminum case with its solid state circuitry mounted on a tough fiberglass epoxy circuit board. To meed the most demanding applications and to provide stability of instrument reading, the 1" w.c. range is compensated for position sensitivity through use of a unique dual sensor system. A standard 9 volt battery provides up to 100 hours of operation. Dual push pads on the front of the panel control on-off, auto zero, and pressure unit selection. No setup or leveling. The large 0.42" LCD display is easy to read, minimizing data collection errors. Units include a "low battery" indicator. The pressure sensor used is a highly stable silicon piezoresistive device. Standard connections are dual sized for 1/8" or 3/16" I.D. vinyl or rubber tubing. Complete instructions are conveniently printed on rear of housing. Also available is the convenient all-in-one kit (475-AV) is small, light, and easy to use. No set-up or leveling needed. Included is a Pitot tube, two static pressure tips with magnetic mounting measure pressure drop across filters, condenser coils, etc.
-
4.7 of 5.0 with 45 Reviews
SALE PRICE: $477.40 1% OFF
Manufacturer: Kanomax
Brand: Kanomax
Model: IQMCN
Manufacturer: Kanomax
Brand: Kanomax
Model: IQMCN
Kanomax CO sensor module for indoor air quality monitor. 0-100ppm range. More than +/-5 ppm accuracy. 0.1 ppm resolution.
-
4.7 of 5.0 with 60 Reviews
SALE PRICE: $487.83
Manufacturer: Fluke
Brand: Fluke
Model: FLUKE-88-5/A KIT
Color: Automotive Multimeter Combo Kit
Manufacturer: Fluke
Brand: Fluke
Model: FLUKE-88-5/A KIT
Color: Automotive Multimeter Combo Kit
|
The Fluke 88 V/A KIT Automotive Multimeter Combo Kit comes with the 88 Series V automotive multimeter, silicone test leads, alligator clips, test probes, inductive RPM pick-up probe, ToolPak magnetic meter hanging kit, temperature probe, two automotive backprobe pins, insulation piercing probe, and a durable carrying case. The digital multimeter (also known as a multitester) is designed for use in high energy environments such as those found on hybrid vehicles and measures AC/DC voltage up to 1,000V, AC/DC current to 10 amp (20 amp for a maximum of 30 seconds), frequency to 200 kilohertz, resistance to 50 megaohms, capacitance to 9,999 microfarads, temperature from -200 to +1090 degrees C (-328 to +1994 degrees F) and includes continuity and diode tests. The 6,000-count resolution, 3-3/4 digit digital display has a bright white backlight for readability in low-light conditions with a 4-1/2 digit mode for precise measurements and displays an analog bar graph which is useful for fast-changing or unstable signals. The meter performs millisecond pulse width measurements for fuel injectors and has Min./Max.-Average recording as well as a Min./Max. Alert to automatically capture variations. A duty cycle indicates the percentage of time a signal is above or below the trigger level during one cycle and a peak capture function detects intermittent problems and transients as low as 250 microseconds. The meter has both manual- and auto-ranging modes for user flexibility, and an auto-hold function to capture stable readings. The relative mode removes test lead resistance from low ohms measurements. This meter is safety rated for Category III up to 1000V and Category IV up to 600V and can withstand hazardous volt spikes in excess of 8,000V to reduce risks of spikes and surges caused by load switching and faults on industrial circuits. It uses a 9V battery (installed) that has a battery life of approximately 400 hours without backlight and has a selectable sleep mode to maximize battery life. The meter measures 20.1 x 9.8 x 5....
|
|