Airflow & Air Quality - Page 43

Manufacturer: Yokogawa Corporation of America Brand: Yokogawa Corporation of America Model: 103011PZPZ

Overview:LED Illuminated Versions Available in Red and WhiteAvailable in AC/DC Amps and Volts, AC Watts/VARS/Power Factor/Frequency/Synchroscope, RTD TemperatureTracking: ±11⁄2% DC; ±2% AC; Vertical MountingRepeatability: ±0.5% DC and Rectifier TypeWater-Tight ConstructionShock-Resistant Pivot and Jewel MovementUL and IP54 Splash-Proof Models Available

Manufacturer: Sper Scientific

15 PSI Certified Manometer Includes: Connection hose Instructions 9V battery Hard shell carrying case N.I.S.T. traceable certificate of calibration Applications: Low differential Pressure in clean rooms Test and balance Medical equipment HVAC Pneumatic systems Computer peripherals Features: The RS232 port enables communication with a computer. All read gauge, and differential Pressure in up to 11 units of measure Large backlight display Max-min Hold Auto power off functions Portable, and weighing only 5oz (150g) including the battery, these meters are convenient for use in the lab, field or factory. High accuracy of 0.3% fs at 25 C Repeatability: 0.2% (max 0.5%) FSO Combined linearity and hysteresis: 0.2 (Max 1.0%) FSO. 1 Year warranty

Manufacturer: COLE-PARMER Brand: AEMC Model: EM5

The EM5 combines the measurement of five critical environmental parameters, namely air velocity and volume, temperature, humidity, light, and sound. Included with the EM5 is a tripod which allows you to set the unit in place so measurements of each enviromental factor can be taken with precise accuracy from a fixed location. This unit is perfect for HVAC applications. It lets you identify airflow and air balancing problems, measure temperature for air cooling and heating systems, analyze lighting and light levels in public places, and detect damaging sound levels. The unit features a easy-to-read backlit LCD, readout in standard or metric units, min/max/avg/DIF modes, data hold, auto-ranging, auto power off, and low-battery indication. Get complete information for real-time environmental conditions all from one meter! measures air velocity (FPM) and air volume (cfm). measures temperature (°F/°C) and humidity measures light (lux). measures sound in db

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

The Dwyer® Model CLD20 Combustible Leak Detector quickly locates leaks of combustible gases. Unit provides accurate detection of Methane, Butane, Ammonia, Ethylene Oxide, Alcohols, Industrial Solvents and other combustible or toxic gases. Adjustable tick rate accelerates as the sensor tip approaches a leak and can be re-zeroed to pinpoint the exact location of the leak. The Model CLD20 offers visual LED indication of leak level and automatically recalibrates when turned off and on. Flexible gooseneck and small sensor head allows use in tight, difficult to reach areas.

Manufacturer: Extech Instruments Brand: Extech Model: EN300

Measures Humidity, Temperature, Air Velocity, Light and Sound.

Manufacturer: Fluke Corporation Brand: Fluke Model: 4357406

The Fluke Flexible Current Probe is a 12" current probe that measures AC to 1,500 amp. This current probe is for use with the Fluke 1730 Three-Phase Energy Logger (sold separately) for conducting energy usage surveys. It measures AC to 1,500 amp to extend the range of the energy logger. The flexible probe is 12" long for coiling around a cable under test. The probe connects to the energy logger vial a 6' cord. It meets International Electrotechnical Commission (IEC) safety standard 61010-1, and is rated for CAT IV installations to 600V and CAT III installations to 1,000V. It comes in a set of three.SpecificationsRange1 to 150 amp AC / 10 to 1,500 amp ACAccuracy (with the 1730 Energy Logger)+ or - (1% of reading + 0.02% of range)Coil length12"Cable length2m/6.6'Installation ratingCAT IV, 600V; CAT III 1,000VStandards metEN safety standard 61010, CE marking, Canadian Standards Association, Australian EMCIngress protectionIP50Weight115gIndustrial power meters measure electrical properties such as voltage, current, power, and energy to monitor the efficiency and performance of a power system. They are used for designing, installing, and maintaining industrial, commercial, and residential power supply systems. More advanced models have features for comparing and recording multiple measurements taken at different times and in different areas.Fluke Corporation manufactures electrical testing tools and software for industrial and commercial applications. The company, founded in 1948, is headquartered in Everett, WA.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 251-AF

Dwyer Durablock Series 250-AF Gages are precision machined 1" thick solid acrylic plastic, virtually unbreakable and free of distortion. The fluid bore is precision drilled to ±.0002" to assure life long accuracy. A glass spirit level is built into the body and encapsulated to prevent damage or tampering. The scale is mirror polished chrome plated brass to assure parallax free reading by alignment of the meniscus with its reflection. Safety traps are incorporated in the body to prevent loss of fluid due to pressure surges. Red and green signal flags indicate clearly when a filter change is necessary. Gages are suitable for use in ambient temperatures of -20 to 150°F. Connection fittings are positively sealed by "O" rings but easily removed for zeroing or addition of fluid. Furnished complete with instructions.

Manufacturer: Applied Materials (Amat) Brand: Applied Materials (Amat)

Window, Manometer, 300 Mm Dps

Manufacturer: Fluke Brand: Fluke Model: 4636915

The new Fluke PRV240 Proving Unit is an easy-to-use, easy-to-sell product that will be in demand by environmental health and safety managers, plant safety officers, facilities managers and other managers concerned with electrical safety and compliance.

Manufacturer: Fluke Brand: Fluke Model: 4636915

The new Fluke PRV240 Proving Unit is an easy-to-use, easy-to-sell product that will be in demand by environmental health and safety managers, plant safety officers, facilities managers and other managers concerned with electrical safety and compliance.