Airflow & Air Quality - Page 59

Manufacturer: Test Products International, Inc Brand: TPI Model: 610

The TPI 610 single-input digital manometer has a + or - 80 inH2O measuring range and a + or - 0.5% full scale accuracy for measuring pressure and vacuum of dry, non-corrosive air and gas. The instrument displays measurements in inH2O. The LCD displays measurements in inches of water, and has a backlight LCD for reading in a variety of lighting conditions. The one-touch zero feature provides field calibration. The autoranging feature provides high resolution and accuracy at low pressures, and the trim mode smoothing function averages the previous four measurements to stabilize erratic readings. The manometer automatically shuts off after 20 minutes to extend battery life. A built-in hanging hook and back-mounted magnet provides hands-free use. SpecificationsPressure typesSingle-input pressure and vacuumMedia compatibilityDry, non-corrosive air and gasPressure range-80 to +80 inches of H2OAccuracy+ or - 0.5% of full scaleEngineering unitsInches of waterPressure limits+ or - 200 inches of waterCase materialDissipative polycarbonate case with rubber bootConnection1/4" barbedOperating temperature0 to 40 degrees CPower requirements9V alkalineManometers measure the pressure of a liquid or gas. They are used in laboratory, medical equipment, engineering, automotive, and heating, ventilation, and air-conditioning applications. Manometers measure any combination of gauge, absolute, or differential pressures. Gauge pressure is the amount of pressure in a system relative to the ambient pressure, absolute pressure is the amount of pressure in a system relative to an absolute vacuum, and differential pressure is the difference between two pressures. Analog manometers are composed of columns of liquid, and they use gravity and the liquid's density to calculate pressure. Because they have no moving parts, analog manometers do not require re-calibration. Digital manometers have pressure sensors that are connected to a system with a hose to provide a digital readout of the amount of pressure present in a system. They use microproc...

Manufacturer: Meriam Process Technologies Brand: Meriam Model: Z200-DPG-75

Migration: minor from high to low port. Sensing element: piston. Wetted parts: body material, SS spring, ceramic magnet and seals. Case material: engineered polymer. Dial size: 2.5 (square), 4.5" (round). Mounting: direct, front flange, 2" pipe and surface mounting. Maximum working pressure: 3000 Psig for Aluminum and Brass, 6000 Psig for SS. Maximum process temperature: 200 degree F. Seals: Buna-N. Lens: Plexiglass (acrylic). Connection: 1/4" NPT(F) Std. Porting: In-line. Over range protection: Up to the MAWP from high and low side. Protecting for gauge and switch: NEMA-4X / IP65. Applications includes: Filter monitoring, pump performance, level measurement, Flow, flow direction, pressure monitoring, Flow rate, strainer monitoring, condition monitoring of heating/cooling system, Air filter and collector/bag filter monitoring, collector/bag filter monitoring, blower performance.

Manufacturer: Kanomax Brand: Kanomax Model: HTP202

Kanomax humidity and temperature probe for 6815 Anemomaster rotating vane digital anemometer. Relative humidity: 5-95 percent range; +/-2 percent accuracy. 0.1 percent resolution, Temperature: -4 to 176 degrees F, Accuracy: +/-(0.3 C + 0.2 percent of reading in C)

Manufacturer: Morphix Brand: Morphix

This Multi-Purpose SafeAir badge provides a low-cost visual indication when either Chlorine or Chlorine Dioxide is present in your environment. A color change, in the form of an exclamation mark, warns of the presence of the targeted chemical (Chlorine indicated on one side of the badge, chlorine dioxide on the other side) and allows you to take appropriate action. This particular badge is designed to indicate the presence of chlorine above a threshold level of 4.0 ppm*hr and chlorine dioxide above 0.2 ppm*hr. (Sold here as a 50-pack. Morphix Part # 382003-50)

Manufacturer: Morphix Brand: Morphix

This SafeAir badge provides a low-cost visual indication when Hydrogen Chloride is present in your environment. A color change, in the form of an exclamation mark, warns of the presence of the targeted chemical and allows you to take appropriate action. This particular badge is designed to indicate the presence of hydrogen chloride above a threshold level of 2.0 ppm. (Sold here as a 50-pack. Morphix Part # 382024-50). An available Color Comparator Accessory (part # 383008) provides an extended range from 2.0 - 26 ppm (purchase separately).

Manufacturer: Honeywell, Inc. Brand: Honeywell

C7632A1004, Honeywell, Inc., CO2 SENSOR WALL MOUNT NO DISPLAY NO RELA

Manufacturer: COLE-PARMER Brand: Testo

This anemometer measures air velocity, temperature and air volume. Miniature hot-wire sensor measures parameters in hard-to-reach areas. Rotating cap protects the sensor during storage. Meter features a single push button control, and includes a rubber duct mount holder for convenient duct measurements. Auto-off function conserves battery life. What's included: pocket clip , rubber duct holder, and three AAA batteries 180° pivoting head allows measurement viewing from any position Folds for easy storage Displays air velocity and air volume in metric units only

Manufacturer: Cole-Parmer Brand: Digi-Sense Model: AO-20250-22

The Digi-Sense data logging Anemometer is designed for precision air velocity measurements in five user-selectable units (ft/min, m/s, mph, km/H, or knots). the instrument will help you meet cooling and environmental requirements for safety and comfort. A Metallic mounting stand is included that provides an opportunity to position the Anemometer to best fit the application. Built-in USB interface and included software allow logged data to be easily downloaded to a PC for analysis and graphing. Digi-sense comes pre-calibrated, saving you hundreds of dollars and extra waiting time to calibrate separately what's included: data analysis software on CD, one 3.6 V replaceable battery, and nist-traceable calibration report with data supplied by in no cal. Versatile handheld or mountable design for quick air velocity sampling or long term monitoring reliable measurements, guaranteed! precalibrated to nist-traceable standards. User-selectable units of measure eliminate the need for conversions measure air velocities up to 3937 ft/min (20.0 m/s) to cover broad range of applications analyze and graph logged data using included software user-defined high and low alarm levels with visual LED indication to bring attention to potential problems articulated screw-on mounting stand provides flexible positioning to fit the application

Manufacturer: Besantek Brand: Besantek

The BESANTEK BST-AIT01 Audio Impedance Tester Designed for True Measurement of Speaker System Actural Impedance at 1kHz. Low battery indication.. Data hold function.. 0 Ohm adjustment.. Technical Specifications: . Measuring ranges: 0-20Ohm / 0-200Ohm / 0-2kOhm.. Test frequency: 1kHz.. Accuracy: 0Ohm:±2%rdg±2dgt or ±0.1Ohm Which is greater 200Ohm/2kOhm : ±2%rdg±2dgt.. Low battery indication.. Data hold indication.. Weight (battery included): Approx. 600g.. Power source: 1.5V (AA) x 8.. Safety standard: EN 61010-1 CAT III 200V EN 61326-1.. Accessories: Instruction Manual, Test Leads. Soft Pouch, Batteries.

Manufacturer: Fluke Corporation Brand: Fluke Model: C290

Hard-Shell protective carrying case for use with 190 Series II ScopeMeters test tool.