|
|
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $99.00 1% OFF
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: RMC-121
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: RMC-121
|
The Dwyer Rate-Master series RMC flowmeter is a 10" scale air flow meter that has 1/2" female NPT inlet and outlet connections for inline monitoring and measuring of air flow with an accuracy of + or – 2% of full scale for precise readings. An integral flow guide stabilizes the float throughout the range for consistent readings. The flowmeter is made of injection molded polycarbonate around a precision tapered pin to maintain calibration, resist breakage, and provide a clear view of the scale. The body is mounted to a stainless steel back bone with welded pipe thread inserts to absorb piping torque during installation. The scale is epoxy-coated brushed aluminum with black graduations marked along both sides of the flow tube for distinct readings. Models are available for measuring air flow in scfm or scfh. Some models come with a brass or stainless steel metering valve for precise adjustment of air flow. Hardware is included for panel or surface mounting. This flowmeter is commonly used for measuring air flow in medical equipment, air samplers, gas analyzers, pollution monitors, chemical injectors, and cabinet purging equipment, among other devices.SpecificationsScale length10"Accuracy+ or – 2% of full scaleConnections1/2" female NPT inlet and outletPressure rating100 psi/6.9 barTemperature rating54 degrees C/130 degrees FWetted materialsBody: polycarbonate; O-ring: Buna-N and neoprene; metal parts: stainless steel or brass (for models with brass valve); float (varies by range): black glass, nickel/copper alloy, stainless steel, or tungsten carbideDimensions (H x W x D)39.05 x 5.72 x 6.35 mm/15-3/8 x 2-1/4 x 2-1/2 inchesWeight1,105.6 g/39 oz.H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Anemometers, also called wind meters, measure air velocity and are most commonly used for weather monitoring to determine wind speed and for HVAC applications to determine air flow wi...
-
5.0 of 5.0 with 2 Reviews
SALE PRICE: $99.99
Manufacturer: Fluke Corporation
Brand: Fluke
Model: PM9091/001
Manufacturer: Fluke Corporation
Brand: Fluke
Model: PM9091/001
The set consists of three black cables with colored BNC male connectors (red, gray and black) for easy identification. Cable length is 1.5m. Maximum signal voltage: 300V rms. Maximum voltage to ground: 600V rms. CAT III per IEC 61010-031. BB120 Shielded banana to BNC adapter is required to adapt to ScopeMeter 120 series shielded banana jack inputs.
-
5.0 of 5.0 with 2 Reviews
SALE PRICE: $101.70 1% OFF
Manufacturer: Testo AG
Brand: Testo
Model: 0560 4101
Color: Multicolored
Manufacturer: Testo AG
Brand: Testo
Model: 0560 4101
Color: Multicolored
|
The Testo 410-1 vane anemometer measures air velocity in m/s, fpm, knots, mph, km/h, and Beaufort scale and air temperature in degrees C and F; calculates windchill temperature; and has hold, maximum, minimum, and timed mean calculation functions for analyzing air flow. Hold function freezes a reading on the display to aid documentation, maximum and minimum functions display highest and lowest readings since the meter was powered on or reset, and timed mean calculation function displays an average reading over time. The meter includes a calibration certificate. The LCD shows air velocity and temperature measurement simultaneously and a backlight provides visibility in low light. The unit has an auto-off mode that shuts it down after 10 minutes of non-use to conserve battery life and has a low-battery indicator. A wrist strap provides a secure hold during one-hand operation. This anemometer is used for weather monitoring and for checking air flow and temperature in ductwork, spray booths, and exhaust hoods, among other applications. SpecificationsAir velocity range0.4 to 20 m/s; 80 to 4,000 fpmAdditional air velocity unitsKnots, mph, km/h, Beaufort scaleAir velocity resolution0.1 m/s; 1 fpmAir velocity accuracy+ or - (2% of reading + 0.2 m/s, 40 fpm)Air temperature range-10 to +50 degrees C/14 to 122 degrees FOperating temperature-10 to +50 degrees C/14 to 122 degrees FPower(2) 1.5V AAA batteries (included)Vane diameter40 mm/1.5 inchesDimensions (H x W x D)133 x 46 x 25 mmWeight110 gH is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Anemometers, also called wind meters, measure air velocity and are most commonly used for weather monitoring to determine wind speed and for HVAC applications to determine air flow within ducts. In addition to air velocity, anemometers may measure wind direction, air pressure, air flow volume, air temperature, humidity, light, and other properties. The most ...
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $102.63 7% OFF
Manufacturer: Test Products International, Inc
Brand: TPI
Model: 608
Manufacturer: Test Products International, Inc
Brand: TPI
Model: 608
|
The TPI 608 single-input digital manometer has a + or - 60 inH2O measuring range and a + or - 1% full scale accuracy for measuring pressure and vacuum of dry, non-corrosive air and gas. The instrument displays measurements in inH2O, psi, mbar, and KPa. The LCD displays measurements in inches of water, psi, mbar, and KPa, and has a backlight LCD for reading in a variety of lighting conditions. The one-touch zero feature provides field calibration. The manometer automatically shuts off after 40 minutes to extend battery life. A built-in hanging hook and back-mounted magnet provides hands-free use. SpecificationsPressure typesPressure and vacuumMedia compatibilityDry, non-corrosive air and gasPressure range-60 to +60 inches of H2OAccuracy+ or - 1% of full scaleEngineering unitsInches of water, psi, mbar, and KPaPressure limits+ or - 120 inches of waterConnection1/4" barbedOperating temperature14 to 122 degrees F/-10 to +50 degrees CPower requirements9V alkalineManometers measure the pressure of a liquid or gas. They are used in laboratory, medical equipment, engineering, automotive, and heating, ventilation, and air-conditioning applications. Manometers measure any combination of gauge, absolute, or differential pressures. Gauge pressure is the amount of pressure in a system relative to the ambient pressure, absolute pressure is the amount of pressure in a system relative to an absolute vacuum, and differential pressure is the difference between two pressures. Analog manometers are composed of columns of liquid, and they use gravity and the liquid's density to calculate pressure. Because they have no moving parts, analog manometers do not require re-calibration. Digital manometers have pressure sensors that are connected to a system with a hose to provide a digital readout of the amount of pressure present in a system. They use microprocessors to calculate pressure, and they require periodic calibration to help ensure accuracy.Test Products International (TPI) manufactures test and measurement equipment such as osci...
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $113.70 8% OFF
Manufacturer: Testo AG
Brand: Testo
Model: 0554 0307
Manufacturer: Testo AG
Brand: Testo
Model: 0554 0307
Testo standard smoke pump test kit. Includes scale, filter paper and lubricant for measuring soot in flue gas. For flue gas analysers.
-
5.0 of 5.0 with 2 Reviews
SALE PRICE: $114.99
Manufacturer: Mengshen
Brand: Mengshen
Manufacturer: Mengshen
Brand: Mengshen
|
Features:Super large LCD display with Backlight ON/OFF function• CO2 / Temperature / Relative Humidity• Calendar • Time- 12700 data log memory- CO2 level warning alarm - NDIR Sensor (Non-Dispersive Infrared)- Waveguide technology with Automatic Background Calibration(ABC)Specifications:- Carbon Dioxide (CO2)• Range : 0-9999 ppm (Out of scale)• Accuracy : ± 50ppm ± 5% reading (0-2000)• Response time : 10 sec- Temperature • Range : - 10-70°C (14-158°F)• Resolution : 0.1°C • Accuracy : ± 0.6°C / ± 0.9°F)- (0-50°C / 32-122°F), others ± 1.2°C- Humidity• Range : 0.1-99.9%• Resolution : 0.1 %• Accuracy : ± 3% (10-90%)- Operating Condition : 0-50°C, 0-95% RH (without condensation)• Storage Temperature : 0-70°C Battery Replacement and Notes :When battery reaches a low level as indicated by LCD not bright or if the CO2 reading is zero, replace the AA X 4 batteries by opening the battery cover.Operate the product using AC power adaptor mostly as mentioned in Operating Instruction / Battery Operation section.Package includes :- CO2 / Temp. / RH DATA LOGGER- AC Power Adaptor (110-240V AC Input, DC 6V Output)- USB Data Cable- PC Software CD ROM (AA Batteries are NOT included)
-
5.0 of 5.0 with 2 Reviews
SALE PRICE: $119.00
Manufacturer: Cape Cod Wind and Weather Inc
Brand: Downeaster
Model: #3060
Color: Brass Case, White Dial
Manufacturer: Cape Cod Wind and Weather Inc
Brand: Downeaster
Model: #3060
Color: Brass Case, White Dial
This high quality barometer in a beautiful hand polished and lacquered 6'' brass case, can be mounted directly on a wall, wooden plaque, or on a mantle stand. Rising barometric pressure shows fair weather, and falling pressure indicates stormy weather is on the way! 6 inch dial. Brass case. Can be mounted on wall. White face. Calibrated for up to 4,000 feet above sea level.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $126.32 3% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: TI-CAR CHARGER
Manufacturer: Fluke Corporation
Brand: Fluke
Model: TI-CAR CHARGER
For the ultimate flexibility in the field - recharge your thermal imager wherever and whenever you need to. For use with: Ti32, Ti25, Ti10, TiR32, TiR1, TiR
-
5.0 of 5.0 with 2 Reviews
SALE PRICE: $127.00 1% OFF
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: RMC-122-BV
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: RMC-122-BV
|
The Dwyer Rate-Master series RMC flowmeter is a 10" scale air flow meter that has 1/2" female NPT inlet and outlet connections for inline monitoring and measuring of air flow with an accuracy of + or – 2% of full scale for precise readings. An integral flow guide stabilizes the float throughout the range for consistent readings. The flowmeter is made of injection molded polycarbonate around a precision tapered pin to maintain calibration, resist breakage, and provide a clear view of the scale. The body is mounted to a stainless steel back bone with welded pipe thread inserts to absorb piping torque during installation. The scale is epoxy-coated brushed aluminum with black graduations marked along both sides of the flow tube for distinct readings. Models are available for measuring air flow in scfm or scfh. Some models come with a brass or stainless steel metering valve for precise adjustment of air flow. Hardware is included for panel or surface mounting. This flowmeter is commonly used for measuring air flow in medical equipment, air samplers, gas analyzers, pollution monitors, chemical injectors, and cabinet purging equipment, among other devices.SpecificationsScale length10"Accuracy+ or – 2% of full scaleConnections1/2" female NPT inlet and outletPressure rating100 psi/6.9 barTemperature rating54 degrees C/130 degrees FWetted materialsBody: polycarbonate; O-ring: Buna-N and neoprene; metal parts: stainless steel or brass (for models with brass valve); float (varies by range): black glass, nickel/copper alloy, stainless steel, or tungsten carbideDimensions (H x W x D)39.05 x 5.72 x 6.35 mm/15-3/8 x 2-1/4 x 2-1/2 inchesWeight1,105.6 g/39 oz.H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Anemometers, also called wind meters, measure air velocity and are most commonly used for weather monitoring to determine wind speed and for HVAC applications to determine air flow wi...
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $129.99 14% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLUKE-700TLK
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLUKE-700TLK
Process test lead kit for 753/754 multi-function process calibrator
|
|