Airflow & Air Quality - Page 61

Manufacturer: CAMPELIFY Brand: CAMPELIFY

Manufacturer: Klinger Brand: Klinger Model: Klinger -049 Color: Multicolored

Product color may slightly vary due to photographic lighting sources or your monitor settings,

Manufacturer: Meriam Process Technologies Brand: Meriam Model: Z300DGC-60

Migration: no migration; zero leakage from high to low port. First marking on the scale: 15 percent of FSD. Sensing element: diaphragm. Wetted parts: diaphragm, body material, SS spring, ceramic magnet. Case material: engineered polymer. Dial size: 2.5 (square), 4.5" (round). Mounting: direct, front flange, 2" pipe and surface mounting. Maximum working pressure: 1500 psi / 100 Bar. Maximum process temperature: 200 degree F. Seals: Buna-N. Lens: Plexiglass (acrylic). Connection: 1/4" NPT(F) Std. Porting: In-line. Over range protection: Up to the maximum from high and low side. Protecting for gauge and switch: NEMA-4/IP65. Applications includes: Filter monitoring, pump performance, level measurement, Flow, flow direction, pressure monitoring, Flow rate, strainer monitoring, condition monitoring of heating/cooling system, Air filter and collector/bag filter monitoring, collector/bag filter monitoring, blower performance.

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-CV300

The ClirVu coating - exclusive to Fluke infrared windows - seals the optic prior to assembly to protect against moisture degradation making it perfect for very hot and very cold environments.

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-CV300

The ClirVu coating - exclusive to Fluke infrared windows - seals the optic prior to assembly to protect against moisture degradation making it perfect for very hot and very cold environments.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 260-AF

Dwyer Durablock Series 250-AF Gages are precision machined 1" thick solid acrylic plastic, virtually unbreakable and free of distortion. The fluid bore is precision drilled to ±.0002" to assure life long accuracy. A glass spirit level is built into the body and encapsulated to prevent damage or tampering. The scale is mirror polished chrome plated brass to assure parallax free reading by alignment of the meniscus with its reflection. Safety traps are incorporated in the body to prevent loss of fluid due to pressure surges. Red and green signal flags indicate clearly when a filter change is necessary. Gages are suitable for use in ambient temperatures of -20 to 150°F. Connection fittings are positively sealed by "O" rings but easily removed for zeroing or addition of fluid. Furnished complete with instructions.

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

The Series CDTA Communicating Carbon Dioxide Detector combines the function of three room sensors into a single, compact housing. Parameters include carbon dioxide, humidity, temperature, and temperature set point with override. By having field selectable Modbus® and BACnet Communications, only four wires are needed for power and the communication signal. The communicating detectors can be daisy-chained together to further reduce installation cost. In order to reduce the set up time, the RS-485 MAC address is set up using on board dip switches. A second set of dip switches are used to select whether output is Modbus® RTU or BACnet MS/TP communication protocols and to limit access to the set up menu. Like our Series CDT Carbon Dioxide Transmitter, the Series CDTA uses a Single Beam Dual Wavelength Non-Dispersive Infrared (NDIR) sensor to measure the carbon dioxide level. This technology can be used in installations that will be occupied 24 hours per day. For improved accuracy, the transmitter can be field calibrated to the environmental conditions of the installation. Also, the barometric pressure can be programmed to correct for altitude. The humidity uses a capacitive polymer sensor and the temperature is measured using a 10KO thermistor sensor. The humidity sensor is field replaceable without the need for additional calibration. Optional local and remote displays are available to display any of the parameters. For applications in which the building occupants aren't familiar with CO2 concentrations, the LCD can be programmed to display temperature, humidity, or temperature set point instead.

Manufacturer: Fluke Corporation Brand: Fluke Model: 2673962

Fluke polyester case for 1750 and 1760 3 phase power quality recorders.

Manufacturer: Fluke Brand: Fluke Model: 4542264

The Fluke Series Battery Analyzer is ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications.

Manufacturer: Kanomax Brand: Kanomax Model: VMUB

Kanomax VOC isobutylene. 0 to 25 ppm Range. +/-10 percent Accuracy. 0.1 ppm Resolution.