Airflow & Air Quality - Page 62

Manufacturer: Kanomax Brand: Kanomax Model: SPUB

Kanomax Sulfur dioxide sensor module. 0 to 100 ppm range.

Manufacturer: COLE-PARMER Brand: Extech

Anemometers or wind gauges have been around since the early days of the Weather Bureau. Vane anemometers combine a wind vane for airflow direction with a propeller-like device that measures wind speed. Hot-Wire Anemometers are thermal anemometers with exposed hot wires. They measure changes in wire temperature via heat lost as it is cooled by the wind, which is converted into fluid velocity. Because wind speed is an indication of a change in weather patterns, meteorologists rely on anemometers (or weather stations containing them) for wind patterns and assess how these patterns relate to humidity, pressure, and temperature. You'll find anemometers at airports, harbors, railroads, and other locations where wind flow is important. Weather enthusiasts may use them on roofs, boats, poles, and other home installation sites. These thermoanemometers operate over broad air velocity and temperature ranges - ideal for the HVAC professional. Large 9999-count dual LCD provides simultaneous air velocity and temperature measurements. The low-friction ball bearing vane wheel is connected to the meter by a 3.9 ft (1.2 m) long cable. Other features include record and recall of min/max readings, data hold, and auto power off with disable function. Accept external type J and K thermocouple inputs for higher temperature measurements to 2372°F (1300°C). What's Included: SD card, vane sensor with 3.9 ft (120 cm) cable, six AA batteries, and hard carrying case Records data on an SD card in Excel® format for easy transfer to a PC for analysis Measures Air Temperature to 122°F (50°C) and air velocity to 4930 ft/min Stores 99 readings manually and 20M readings via 2G SD card Type K/J Thermocouple input for high temperature measurements Large (9999 count) LCD displays Air Velocity and Temperature simultaneously 2% velocity accuracy via low friction ball bearing vane wheel on 39" (1 m) cable Record/Recall Min, Max, Data Hold and Auto power off Adjustable data sampling rate: 1 t

Manufacturer: Fluke Corporation Brand: Fluke Model: EI-162AC

Fluke EI-162AC Clip-on Current Transformer (Inducing) The EI-162AC Clip-On Current Transformer (Inducing) is used along with the Fluke 1623 or 1625 to perform Selective and Stakeless testing. Selective testing means using one clamp along with earth ground stakes to provide earth ground loop resistance values for one earth ground electrode. Stakeless testing uses two clamps to perform earth ground loop resistance measurement without stakes. Both tests have the advantage of providing measurements with no disconnection from the grounding system! Safer and quicker.

Manufacturer: General Tools and Instruments Brand: General Tools & Instruments Model: DM8215

HVAC, Industrial Gas Pressure.

Manufacturer: Extech Instruments Brand: Extech Model: AN300-NIST

Exec's 4" (10cm) Large Vane Thermo-Anemometer series allows for more precise readings on larger size ducts. Each meter simultaneously displays Airflow or Air Velocity and Temperature. This product is NIST Certified which indicates that the product is traceable to standards provided by the National Institute of Standards and Technology (NIST).

Manufacturer: CEAG GHG Brand: CEAG GHG Model: CEAG GHG-014 Color: Multicolored

Product color may slightly vary due to photographic lighting sources or your monitor settings,

Manufacturer: FLIR Systems, Inc. Brand: Extech Model: AN320

Large Vane CFM/CMM Anemometer/Psychrometer plus CO2. Measures Air Velocity, Air Flow, Relative Humidity, Wet Bulb, Dew Point and Carbon Dioxide. Extech's Large Vane Thermo-Anemometer series allows for more precise readings on larger size ducts (4" (10cm) vane). Multipoint and timed average calculations. Min/Max, Data Hold, and Auto power off. Complete with four AAA batteries and hard carrying case.

Manufacturer: Kanomax Brand: Kanomax Model: IQMVN

Kanomax Non methane hydrocarbon sensor module for indoor air quality monitor. 0-25 ppm range. More than +/-0.5 ppm accuracy. 0.1 ppm resolution.

Manufacturer: Ohaus Brand: Ohaus Model: 30031710

The multipurpose Ranger 3000 has all of the capabilities to produce precise results rapidly for a variety of applications. With nine application modes, Ranger 3000 is the ideal scale to meet many industrial weighing needs. Portable and equipped with a rechargeable battery, this scale is beneficial in every corner of the factory and is equipped with functions and features that elevate the Ranger 3000 to a class of its own.

Manufacturer: Kanomax Brand: Kanomax Model: 6501-0E

Kanomax Climomaster basic unit. Multi-function hot-wire anemometer with detachable compatible probes. Simultaneously measures and displays air velocity, flow rate, humidity, temperature, and differential pressure. Airflow rate calculation based on registered duct size. Data HOLD function, record and recall MAX/MIN/AVG. Smart probe technology: easy probe replacement without recalibration of the main unit. Data HOLD function, record and recall MAX/MIN/AVG. Store up to 20,000 measurements. Includes 79 in (200cm) probe connection cable, USB cable, 6 pcs. AA batteries, carrying case, and NIST Certificate. Air velocity - range: 2 to 9840 fpm (0.01 to 50.0 m/s) varies by probes, accuracy: +/-2 percent of reading or 0.015 m/s whichever is greater. Temperature - range: -4 to 158 degree F, accuracy: +/-1 degree F, relative humidity - range: 2 to 98 percent RH, accuracy: +/-2 percent RH. Interface: USB/RS232C (for print-out). Datalogging: Up to 20,000 records. Dimensions: 3.4-inches width by 7.4-inches height 1.6-inches depth. As well as HVAC testing, Climomaster and its probes are suitable for IAQ investigation, laboratory control, clean room control, and industrial applications, such as automotive.