Airflow & Air Quality - Page 81

Manufacturer: Seeedstudio Brand: Seeedstudio

The Grove - CO2 Sensor module is infrared CO2 sensor high sensitivity and high resolution. Infrared CO2 sensor MH-Z16 Is a general-purpose, small sensors, the use of non-dispersive infrared (NDIR) Present in the principle of the air CO2 Detect, with good selectivity, oxygen- dependent, long life, built-in temperature sensor, temperature compensation, with UART output, easy to use. It can be widely used in HVAC and indoor air quality monitoring, industrial process monitoring and security, agriculture and livestock production process monitoring. Note The sensor value only reflects the approximated trend of gas concentration in a permissible error range, it DOES NOT represent the exact gas concentration. The detection of certain components in the air usually requires a more precise and costly instrument, which cannot be done with a single gas sensor. If your project is aimed at obtaining the gas concentration at a very precise level, then we do not recommend this gas sensor. Specification: Measuring the range of 0-2000 parts per million (PPM) Resolution of 1 PPM 0-2000 parts per million (PPM) Accuracy of 200 PPM A Warm - up time 3 minutes Response Time 5000ppm：severe depletion of oxygen, permanent brain damage and even death

Manufacturer: Fluke Corporation Brand: Fluke Model: FVF-UG

FlukeView Forms plus Designer allows a user to edit an existing form or create a new form to customize the report to individual needs. Use the array of Upgraded analysis and reporting forms to display your data in tables, graphs or helpful diagrams; even leave notes on the forms to draw attention to a particular event. To address the increasing demands for reporting and documentation, Fluke presents FlukeView Forms documenting software. FlukeView Forms increases the power of your Fluke tool by enabling you to document, store and analyze individual readings or series of measurements, then convert them into professional-looking documents. The ability of FlukeView Forms to support multiple instruments enables the user to install and learn only one software application in order to use these multiple tools fully. Use the FlukeView Forms plus Designer to customize your reports or add your company logo. Share or store your data with co-workers or clients - print forms, export to other software programs, or have co-workers and clients down load the free FlukeView Demo/Reader to view and interact with your captured data. With USB/IR cable. It supports the following test tools: 1550B Megaohms meter, 1653/1653B/1654B/1652C electrical installation tester, 180 series, 287 and 289, 45, 53-II B and 54-II B, 568 IR thermometer, 789 Process meter, 8808A, 8845A/8846A, 89-IV and 87-IV, 975 Air Meter Test Tool, 983 Particle Counter. Number of standard forms: 9. Able to modify standard forms. Includes FlukeView Forms Designer for customizing forms. Number of multiple meters whose data can be viewed simultaneously: 8. Number of concurrently running instances of FlukeView Forms allowed: 4. Ability to change company name on report. Supports multi-page forms. Requirements: Operating system: Windows 2000, Windows XP, Windows Vista or Windows 7. Minimum PC Hardware: Pentium class or better microprocessor, 32 MB RAM, 70 MB hard disk space (100 MB to install). Size: 203 x 100 x 50mm.

Manufacturer: Control Company Brand: Control Company

Control Company Data Acquisition System for Digital Barometer (6530) - CONTR

Manufacturer: Fluke Brand: Fluke Model: FLK-A3002 FC

The Fluke FLK-A3002 FC Wireless AC Voltage Module is one member of a family of wireless test tools that let you share test data using the Fluke Connect app with ShareLive video call. Fluke Connect Wireless Test Tools put tools, not your body, near live electrical panels. It's simple. Connect the FLK-A3002-FC wireless AC voltage module, or any of the other Fluke Connect remote modules, and read the results on the Fluke Connect Wireless Multimeter or a portable PC from a safe distance. Better still, the FLK-A3002FC can send measurement data to your smartphone, so you can save and share measurements from the field with your team anytime, from anywhere. The FLK-A3002 FC is designed to be used with the i410 or i1010 ac/dc current clamps (not included with module). AC/DC current module wirelessly relays measurements from the i410 or i1010 clamp accessory to other Fluke Connect enabled master units.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 475-2-FM

The Dwyer Series 475 Mark III intrinsically-safe digital manometer provides positive, negative, and differential pressure measurements, and is used to perform field calibration, monitoring or troubleshooting HVAC systems, performing clean room inspections, air velocity monitoring, and natural gas appliance-line testing. The meter is FM-approved intrinsically safe for Class 1, Div. 1, Group A, B, C, D, T4 hazardous locations. It has an accuracy of + or - 0.5% of full scale at 60 to 78 degrees F, and + or - 1.5% full scale at 32 to 60 and 78 to 104 degrees F. The extruded aluminum case provides durability. The backlit four-digit LCD displays the pressure measurement. The zero function nulls minor pressure differences before measuring. Standard connections accept 1/8" or 3/16" inside diameter (ID) vinyl or rubber tubing. The meter is powered by a 9V battery (included) and automatically shuts off after 20 minutes to preserve battery life. SpecificationsPressure typesPositive, negative, and differentialMedia typeAir and compatible combustible gasesCase materialExtruded aluminumDisplayFour-digit LCDTemperature limits0 to 140 degrees F/-17.8 to +60 degrees CCompensated temperature limits32 to 104 degrees F/0 to 40 degrees CDimensions6-17/32 x 2-13/16 x 29/32 (H x W x D)Power9V alkaline batteryAgency approvalsCE, FMH is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Manometers measure the pressure of a liquid or gas. They are used in laboratory, medical equipment, engineering, automotive, and heating, ventilation, and air-conditioning applications. Manometers measure any combination of gauge, absolute, or differential pressures. Gauge pressure is the amount of pressure in a system relative to the ambient pressure, absolute pressure is the amount of pressure in a system relative to an absolute vacuum, and differential pressure is the difference between two pressures. Analog manometers are compose...

Manufacturer: Ohaus Brand: Ohaus Model: 72212663

The OHAUS CS is a lightweight, portable, compact balance perfectly suited for use in laboratory, industrial, education and home use applications. CS offers a great value without sacrificing accuracy for weighing jobs of 200g to 5000g.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 475-7-FM

The Dwyer Series 475 Mark III intrinsically-safe digital manometer provides positive, negative, and differential pressure measurements, and is used to perform field calibration, monitoring or troubleshooting HVAC systems, performing clean room inspections, air velocity monitoring, and natural gas appliance-line testing. The meter is FM-approved intrinsically safe for Class 1, Div. 1, Group A, B, C, D, T4 hazardous locations. It has an accuracy of + or - 0.5% of full scale at 60 to 78 degrees F, and + or - 1.5% full scale at 32 to 60 and 78 to 104 degrees F. The extruded aluminum case provides durability. The backlit four-digit LCD displays the pressure measurement. The zero function nulls minor pressure differences before measuring. Standard connections accept 1/8" or 3/16" inside diameter (ID) vinyl or rubber tubing. The meter is powered by a 9V battery (included) and automatically shuts off after 20 minutes to preserve battery life. SpecificationsPressure typesPositive, negative, and differentialMedia typeAir and compatible combustible gasesCase materialExtruded aluminumDisplayFour-digit LCDTemperature limits0 to 140 degrees F/-17.8 to +60 degrees CCompensated temperature limits32 to 104 degrees F/0 to 40 degrees CDimensions6-17/32 x 2-13/16 x 29/32 (H x W x D)Power9V alkaline batteryAgency approvalsCE, FMH is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Manometers measure the pressure of a liquid or gas. They are used in laboratory, medical equipment, engineering, automotive, and heating, ventilation, and air-conditioning applications. Manometers measure any combination of gauge, absolute, or differential pressures. Gauge pressure is the amount of pressure in a system relative to the ambient pressure, absolute pressure is the amount of pressure in a system relative to an absolute vacuum, and differential pressure is the difference between two pressures. Analog manometers are compose...

Manufacturer: Fluke Corporation Brand: Fluke Model: AS400

Fluke AS400 Probe Accessory Kit for the VPS400 Probes

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 475-3-FM

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 475-5-FM

The Dwyer Series 475 Mark III intrinsically-safe digital manometer provides positive, negative, and differential pressure measurements, and is used to perform field calibration, monitoring or troubleshooting HVAC systems, performing clean room inspections, air velocity monitoring, and natural gas appliance-line testing. The meter is FM-approved intrinsically safe for Class 1, Div. 1, Group A, B, C, D, T4 hazardous locations. It has an accuracy of + or - 0.5% of full scale at 60 to 78 degrees F, and + or - 1.5% full scale at 32 to 60 and 78 to 104 degrees F. The extruded aluminum case provides durability. The backlit four-digit LCD displays the pressure measurement. The zero function nulls minor pressure differences before measuring. Standard connections accept 1/8" or 3/16" inside diameter (ID) vinyl or rubber tubing. The meter is powered by a 9V battery (included) and automatically shuts off after 20 minutes to preserve battery life. SpecificationsPressure typesPositive, negative, and differentialMedia typeAir and compatible combustible gasesCase materialExtruded aluminumDisplayFour-digit LCDTemperature limits0 to 140 degrees F/-17.8 to +60 degrees CCompensated temperature limits32 to 104 degrees F/0 to 40 degrees CDimensions6-17/32 x 2-13/16 x 29/32 (H x W x D)Power9V alkaline batteryAgency approvalsCE, FMH is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Manometers measure the pressure of a liquid or gas. They are used in laboratory, medical equipment, engineering, automotive, and heating, ventilation, and air-conditioning applications. Manometers measure any combination of gauge, absolute, or differential pressures. Gauge pressure is the amount of pressure in a system relative to the ambient pressure, absolute pressure is the amount of pressure in a system relative to an absolute vacuum, and differential pressure is the difference between two pressures. Analog manometers are compose...