Airflow & Air Quality - Page 83

Manufacturer: Bitfinder Brand: Bitfinder Model: 1

Do you know what's in the air you're breathing? Truth is, indoor air can be 5x more polluted than outside, affecting allergies, asthma, eczema, sleep, and much more. Awair tracks toxins in your air and gives you recommendations to help you keep it clean and safe. Awair gives you the knowledge you need to improve your indoor environment and take control.

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

The Series CDX Carbon Dioxide Transmitter is a low cost and high performing CO2 sensor. This product will provide immediate energy savings by functioning in conjunction with building automation systems and allowing the user to effortlessly and effectively control fresh air into preferred areas. On-Demand ventilation using CO2 sensors prevents energy losses from over ventilation while maintaining indoor air quality. The potential for the greatest energy saving occurs in areas where occupancy alters over the duration of the day. The Series CDX Transmitters utilize the patented Automatic Background Calibration (ABC) Logic self-calibration system. ABC Logic virtually eliminates the need for manual calibration in applications where the indoor CO2 level drops to outside levels during unoccupied periods. If the transmitter is being used in an application where a building is continuously occupied 24 hours per day, then the user will permit that the ABC Logic feature be turned off.

Manufacturer: COLE-PARMER Brand: General Tools

This anemometer records up to eight multi-point readings and measures airflow in ft/min, m/s, mph, km/hr, and knots. Display both airflow and temperature measurements on the large dual LCD. Meter also features auto shutoff, data hold, min/max, multipoint average, low-battery indicator, and selectable temperature readings (°F/°C). Automatically calculates cubic feet per minute (CFM) One-handed operation for CFM measurement

Manufacturer: Innovative Sensor Technology Brand: Innovative Sensor Technology Model: 050.00206

Substrate: glass Tolerance: Temperatur Sensor (Pad 1-8): 800 Ohm +/-10% R1 (Pad 2-3): 720 Ohm +/- 10% R2 (Pad 3-4): 720 Ohm R3 (Pad 5-6): 530 Ohm +/- 10% R4 (Pad 6-7): 530 Ohm Matching between elements (R1 & R2 and acc. R3 & R4): 2% TCR: 3670ppm/K +/- 80ppm/K Resistivity at T=0°C Chip-Dimension: 3.5 x 5.1 x 0.5 mm (LxWxH) PCB-dimension: 34.4 x 10.8 x 1 mm (LxWxH) PCB 4 mm shorter milled and discharged Sensor Contacts: bonding pads Note: Temperatur Sensor not at the level of the membrane (redesign) Special: Sensors contacted by bonding process of PCB PCB- Layout: V1.0

Manufacturer: MyMoldDetective Brand: MyMoldDetective

Finally a Mold Test Kit that test for mold in your air like the professionals so. My Mold Detective's Mold Test Kit utilizes the same air sampling methods that industry professionals use to test air quality in homes and businesses and utilizes industry-standard air sample cassettes. My Mold Detective's Mold Test Kit is not just another petri dish sampling method that is outdated technology and unreliable, it is professionalism boxed and brought to the Do-It-Yourself populace in a simple 3 step process. Now you can stop ignoring the musty odors, allergic reactions and occupant complaints, and give the air you breathe the attention it deserves.

Manufacturer: Fluke Corporation Brand: Fluke Model: 3024689

Fluke cable for 32A planar shunt.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 475-000-FM

The Dwyer Series 475 Mark III intrinsically-safe digital manometer provides positive, negative, and differential pressure measurements, and is used to perform field calibration, monitoring or troubleshooting HVAC systems, performing clean room inspections, air velocity monitoring, and natural gas appliance-line testing. The meter is FM-approved intrinsically safe for Class 1, Div. 1, Group A, B, C, D, T4 hazardous locations. It has an accuracy of + or - 0.5% of full scale at 60 to 78 degrees F, and + or - 1.5% full scale at 32 to 60 and 78 to 104 degrees F. The extruded aluminum case provides durability. The backlit four-digit LCD displays the pressure measurement. The zero function nulls minor pressure differences before measuring. Standard connections accept 1/8" or 3/16" inside diameter (ID) vinyl or rubber tubing. The meter is powered by a 9V battery (included) and automatically shuts off after 20 minutes to preserve battery life. SpecificationsPressure typesPositive, negative, and differentialMedia typeAir and compatible combustible gasesCase materialExtruded aluminumDisplayFour-digit LCDTemperature limits0 to 140 degrees F/-17.8 to +60 degrees CCompensated temperature limits32 to 104 degrees F/0 to 40 degrees CDimensions6-17/32 x 2-13/16 x 29/32 (H x W x D)Power9V alkaline batteryAgency approvalsCE, FMH is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Manometers measure the pressure of a liquid or gas. They are used in laboratory, medical equipment, engineering, automotive, and heating, ventilation, and air-conditioning applications. Manometers measure any combination of gauge, absolute, or differential pressures. Gauge pressure is the amount of pressure in a system relative to the ambient pressure, absolute pressure is the amount of pressure in a system relative to an absolute vacuum, and differential pressure is the difference between two pressures. Analog manometers are compose...

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 475-000-FM

The Dwyer Series 475 Mark III intrinsically-safe digital manometer provides positive, negative, and differential pressure measurements, and is used to perform field calibration, monitoring or troubleshooting HVAC systems, performing clean room inspections, air velocity monitoring, and natural gas appliance-line testing. The meter is FM-approved intrinsically safe for Class 1, Div. 1, Group A, B, C, D, T4 hazardous locations. It has an accuracy of + or - 0.5% of full scale at 60 to 78 degrees F, and + or - 1.5% full scale at 32 to 60 and 78 to 104 degrees F. The extruded aluminum case provides durability. The backlit four-digit LCD displays the pressure measurement. The zero function nulls minor pressure differences before measuring. Standard connections accept 1/8" or 3/16" inside diameter (ID) vinyl or rubber tubing. The meter is powered by a 9V battery (included) and automatically shuts off after 20 minutes to preserve battery life. SpecificationsPressure typesPositive, negative, and differentialMedia typeAir and compatible combustible gasesCase materialExtruded aluminumDisplayFour-digit LCDTemperature limits0 to 140 degrees F/-17.8 to +60 degrees CCompensated temperature limits32 to 104 degrees F/0 to 40 degrees CDimensions6-17/32 x 2-13/16 x 29/32 (H x W x D)Power9V alkaline batteryAgency approvalsCE, FMH is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Manometers measure the pressure of a liquid or gas. They are used in laboratory, medical equipment, engineering, automotive, and heating, ventilation, and air-conditioning applications. Manometers measure any combination of gauge, absolute, or differential pressures. Gauge pressure is the amount of pressure in a system relative to the ambient pressure, absolute pressure is the amount of pressure in a system relative to an absolute vacuum, and differential pressure is the difference between two pressures. Analog manometers are compose...

Manufacturer: Brecknell Brand: Salter Brecknell Model: 816965004850

The HS-200M is a mechanical device for use where either weight or height measurements are necessary. Constructed of steel with a durable white finish, this scale will provide years of service in normal applications.

Manufacturer: Hoyt Electrical Instrument Works Brand: Hoyt Electrical Instrument Works Model: 584MM, 0-300VAC

METER, INDUSTRIAL, NEMA 4 RATED