Airflow & Air Quality - Page 9

Manufacturer: AAB Brand: AAB Model: TS-100-6PK

AAB TS-100-6PK TempSmart Temperature and Humidity Data Logger Kit with 6 Meters - Measures and Calculates Dry Bulb & Wet Bulb & Feels Like Temperatures, and Relative Humidity. Stores 60+ Days of Data and Exports Professional History Reports.

Manufacturer: Amprobe Brand: Amprobe Model: MANO2-A

The Amprobe ManO2-A digital manometer measures gauge or differential pressure up to 2 pounds per square inch (psi) in heating, ventilation, and air-conditioning (HVAC) applications and in devices with valves and pneumatic controls, such as medical equipment. It provides readings in inches of water (inH2O), millimeters of water (mmH2O), pounds per square inch (psi), bar, and millibar (mbar). The meter's hold function keeps a reading on display, even after the meter is disconnected or the pressure measurement changes. The record function stores the maximum and minimum reading in each session to track sudden increases and decreases in pressure. A clock keeps track of the time of measurement events, such as maximum or minimum readings, so that pressure measurements can be analyzed in relation to other concurrent events and patterns in pressure fluctuations can be spotted. The manual zero function sets the display to zero when no pressure is applied to the connectors. The meter's backlit liquid crystal display (LCD) is readable in low light. Two connection hoses are included for connecting the meter to the system to be measured. The meter has a USB port for connecting the meter to a computer using a data cable (not included) in order to transfer data and record continuous measurements. The meter operates on one 9V battery (installed), and it automatically turns off after 20 minutes of non-use to conserve battery life. It weighs 0.485 lb. (220 g) and measures 7.16 x 2.83 x 1.18 inches (182 x 72 x 30 mm, H x W x D, where H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back). The meter comes with a hard carrying case to help protect it against bumps and abrasions during storage and transport. It meets European Conformity and Australia N10140 standards.Manometers measure the pressure of a liquid or gas. They are used in laboratory, medical equipment, engineering, automotive, and heating, ventilati...

Manufacturer: Testo, Inc. Brand: Testo

TESTO510, Testo, Inc., TESTO 510 MANOMETER

Manufacturer: Fluke Corporation Brand: Fluke Model: VPS410-II-B

Fluke Corporation is the world leader in the manufacture, distribution and service of electronic test tools and software. From industrial electronic installation, maintenance and service, to calibration and quality control, Fluke tools help keep business and industry around the globe up and running.

Manufacturer: Fluke Corporation Brand: Fluke Model: BC7217

External Battery Charger, For Graphical Multimeter

Manufacturer: Amprobe Brand: Amprobe Model: TMA10A Color: Multicolored

The Amprobe TMA10A anemometer has conventional angled-arm vane with a low-friction ball bearing to measure air velocity, air flow, and air temperature, and is used by HVAC/R technicians to measure wind flow and temperature in air conditioning systems. The vane has a flexible cord for placing in hard to reach areas. Air velocity is measured in feet per minute (ft/min), and meters per second (m/s), air flow volume in cubic meters per second (CMS) and cubic feet per minute (CFM), and dual-scale thermistor temperature sensor measures temperature in F and C.The meter measures single-point air flow source for continuous moving average for up to two hours or up to eight readings for multi-point sources, and has minimum, maximum, average, and hold functions for recording data. An RS232 port exports data. The meter requires one 9V battery (included), and includes a hard-sided carrying case, and instructions.Specifications Air velocity range 125 to 4900 ft/min (0.40 to 25.00 m/s) Air velocity accuracy + or - 2 percent of full scale Air flow range 1 to 9,999 CFM (0.01 to 99.99 CMS) Air flow accuracy 0 to 9.999 CFM/CMS Air temperature range 32 to 122 degrees F (0 to 50 degrees C) Air temperature accuracy + or - 1.5 degrees F (0.8 degree C) Resolution 0.01 m/s and CMS, 1 ft/min and CFM, 0.1 degree F/C Operating environment 32 to 122 degrees F (0 to 50 degrees C) at less than 80 percent relative humidity Dimensions (main instrument) 7.1 x 2.8 x 1.4 inches (181 x 71 x 38 mm) (H x W x D) Sensor head diameter 70 mm Weight (including battery and sensor) Approximately 0.8 lb. (363g) H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Anemometers measure air speed, and in some cases airflow and air direction. They are used in field and lab applications. Amprobe manufactures electrical testing equipment for commercial, industrial, and home u...

Manufacturer: Test Products International, Inc Brand: TPI Model: 575C1

The TPI 575C1 anemometer with vane probe and telescoping hot-wire probe measures air velocity in m/s, fpm, knots, mph, and km/h and air temperature in degrees C and F, and has record, recall, and hold functions for analyzing air flow. The meter records and recalls minimum, maximum, and average readings and its data hold function freezes a reading on the display to aid documentation. For transferring and storing data directly to a PC, the meter has an output terminal for connecting to the RS-232 serial port of a compatible PC (interface cable sold separately). The LCD shows air velocity and temperature readings simultaneously. The meter has an auto power off mode that shuts it down after 10 minutes of non-use to conserve battery life and has a low-battery indicator. It complies with the Restriction of Hazardous Substances (RoHs) directive, is Underwriters Laboratories (UL) listed, and has European Conformity (CE) marking. This anemometer is used for monitoring air flow and temperature in ductwork, spray booths, and exhaust hoods, among other applications. SpecificationsAir velocity rangeVane probe: 0.4 to 25 m/s, 79 to 4,921 fpm, 0.77 to 48 knots, 0.89 to 56 mph, 1.4 to 90 km/h; Hot-wire probe: 0.2 to 20 m/s, 39 to 3,937 fpm, 0.38 to 38 knots, .44 to 44 mph, 0.72 to 72 km/hAir velocity resolution0.1 m/s; 1 fpm; 0.1 knots; 0.1 mph; 0.1 km/hAir velocity accuracyVane probe: + or - (2% of reading + 3 digits); hot-wire probe: + or - (5% of reading + 3 digits)Air temperature range-20 to 80 degrees C/ -5 to 175 degrees FOperating environment0 to 50 degrees C/32 to 122 degrees F at less than 80% relative humidityPower(6) 1.5V AAA batteries (included)Vane diameter2-3/4"Hot-wire probe lengthUp to 37"Main unit dimensions (H x W x D)144 x 74 x 29 mm/5.7 x 2.9 x 1.1 inchesWeight0.3 lb.H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Anemometers, also called wind meters, measure air veloc...

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-414D/62MAX+

FLUKE FLUKE-414D/62MAX+ FLUKE KIT WITH 414D LASER DISTANCE METER AND 62MAX+ IR THERMOMETER

Manufacturer: Fluke Corporation Brand: Fluke Model: FLK-CNX-a3000

The CNX a3000 AC Wireless Current Clamp Module is part of the Fluke team of wireless troubleshooting tools.Connect the CNX a3000 AC Wireless Current Clamp Module to your test point and view the results up to 20 meters away on the CNX Wireless Multimeter. You’ll save time with fewer run-arounds collecting multiple measurements. Use multiple modules for measurements on three-phase systems, use as a stand-alone measurement tool, or combine with other CNX modules as a system for multiple measurements. From short distances you can even view readings from modules through closed electrical panels. Plus, using the optional PC adapter, there will be no more writing down data as the CNX remote modules capture up to 65,000 sets of time stamped min/max/avg readings. CNX wireless test tools also offer increased safety by letting you view readings in a separate location from the test point. Now you can take readings on moving machinery with only the measurement module in harm’s way.Using the optional PC adapter, the CNX wireless troubleshooting system can track up to 10 measurement modules simultaneously, with results sent to a PC for further analysis.

Manufacturer: Honeywell Brand: Honeywell Model: AWM730B5

Flow Sensors 200 LPM Airflw Snsor