Airflow & Air Quality - Page 96

Manufacturer: Ohaus Brand: Ohaus Model: 30080693

The newest addition to the Ohaus starter series of electrochemistry instruments includes Electrodes that support advanced conductivity measurements.

Manufacturer: Fluke Corporation Brand: Fluke Model: 80I-110S

The 80I-110s is compatible with any fluke ScopeMeter test tool, power harmonics analyzer, oscilloscope, multimeter. It also compitable with other voltage measurement device with BNC input connectors or if using a meter convert the banana plugs to a BNC connector using the adapter. It is designed to provide you with safe, high accuracy measurements for a wide range of applications. The specially designed built-in safety features such as the 600 V rms rating at the input jaws, output cable, and BNC connector enhance work safety in industrial and commercial power distribution systems. The probe is shielded for high noise immunity, to prevent unwanted noise when troubleshooting around noise generating devices like adjustable speed motor drives and ignition systems. Safety rating: IEC 1010 and CSA-C22.2 No. 1010-1 installation category II, working voltage 600V. Output signal: 10A range: 100mV/A; 100A range: 10mV/A. Bandwidth: 1Hz to 20kHz. 10 A, AC/DC, 100 A, AC/DC Nominal current range. 0.1A - 10A AC/DC and 1A - 100A AC/DC Continuous current range. 140 A - 2 kHz Maximum non-destructive current. 3 percent + 50 mA (at 10 A) basic accuracy. DC - 100 kHz Useable frequency. 600 V maximum voltage. 9 V, 55 h battery life. 11.8mm conductor diameter. 1.6m output cable length. 1 year warranty.

Manufacturer: Kanomax Brand: Kanomax Model: S620-00

Kanomax Windows data processing software, for model 1550/1560 multi-channel Anemomaster .

Manufacturer: Testo AG Brand: Testo Model: 0554 1101

Testo spare dirt filter for flue gas analysers.

Manufacturer: Fluke Brand: Fluke Model: 4574703

Easy to hold the camera and use it for extended period of time inspecting hard to reach areas.

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

Provide visual indication of pressure with the Dwyer® Series 1213 Gas Pressure Manometer. Designed for use with natural gas, the manometer can also be used to monitor any compatible gases up to 15 inches of water column. Tap water is used as the sensing media and a magnetic clip provides temporary or permanent mounting. Economically priced and made of durable plastic for years of trouble-free service. Includes three feet of vinyl tubing and 1/8" nylon male NPT to barb fitting.

Manufacturer: Fluke Corporation Brand: Fluke Model: 2540744

Fluke EP0326Z dolphin clip. Red in color.

Manufacturer: COLE-PARMER Brand: Sper Scientific

science-lab-meters

Manufacturer: Perfect Prime Brand: Rise Color: Gray

Features -Gauge & differential pressure -Measuring ranges ±13.79 kPa / ±2 psi / ±55.4 H2O -11 selectable scales & units: inH2O, psi, bar, mbar, kPa, inHg, mmHg, ozin2, FtH2O, cmH2O, kgcm2 -High accuracy ±0.3% in full scale -Large LCD with backlight -Zero adjust & offset functions -MAX/MIN/AVG values with relative time stamps -Data Hold -Error codes for out of range indication -Low battery indication -Auto power off (can be disabled) -2 pairs of tubing included Specifications -Display: Dual LCD -Accuracy: ±0.3% FSO (25°C) -Repeatability: ±0.2% (Max ±0.5% FSO) -Linearity/Hysteresis: ±0.29% FSO -Maximum Pressure: 10psi -Response Time: 0.5 second typical -Low Battery Indicator: Yes -Over Range Indicator: Err.1 -Under Range Indicator: Err.2 -Operating Conditions: 0 to 55°C (32 to 122°F) -Storage Conditions: -1 to 60°C (14 to 140°F) -Power Supply: 1 x 9V Battery (not included) One set included -1 x Manometer -2 pairs of tubing -1 x 1/8" MPT x 1/8" Barb Access Fitting -1 x Soft pouch -1 x Instruction Manual -Standard Factory Package

Manufacturer: Dwyer Instruments Brand: Dwyer Model: VFB-66

The Dwyer Visi-Float series VFB flowmeter is a 4" scale air flow meter with 1/8" female NPT inlet and outlet connections for inline monitoring and measuring of air flow with an accuracy of + or – 3% of full scale, and is precision machined from solid acrylic plastic to resist breakage and provide a clear view of the scale. Black scale graduations are hot-stamped into the plastic for distinct readings. This lightweight flowmeter has a metal mounting insert for panel mounting and can also be supported directly by system piping. Models are available for measuring air flow in scfh, scfm, lpm, or cc/min. Some models come with a brass or stainless steel metering valve for precise adjustment of air flow, or with a pointer flag for clear-cut readings. Inlet and outlet connections are brass except for models with stainless steel wetted parts and the connections are on the back of the flowmeter except for models that have end connections. This flowmeter is commonly used for measuring air flow in medical equipment, air samplers, gas analyzers, pollution monitors, chemical injectors, and cabinet purging equipment, among other devices.SpecificationsScale length4" (on average)Accuracy+ or – 3% of full scaleConnections1/8" female NPT inlet and outletPressure and temperature ratingWithout valve: 100 psig/6.9 bar @ 65 degrees C/150 degrees F; with valve: 100 psig/6.9 bar @ 48 degrees C/120 degrees FWetted materialsBody: acrylic plastic; O-ring: Buna-N; metal parts: brass (standard) or stainless steel (applicable models); float (varies by range): black glass, nickel/copper alloy, stainless steel, or aluminumDimensions (H x W x D)169.9 x 34.93 x 31.75 mm/6-11/16 x 1-3/8 x 1-1/4 inchesWeight0.20 to 0.25 kg/7.2 to 8.8 oz.H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Anemometers, also called wind meters, measure air velocity and are most commonly used for weather monitoring to determine w...