Stroboscopes - Page 10

Manufacturer: Vetus Brand: VETUS INSTRUMENTS Color: Black

Notice: We just can send 220V American Standard plug to you . Feature : Stroboscope DT-2350P is used to measure the rotational speed of a rotating object and to inspect the defect on its surface without the need to adhere any mark to reflect the light, and thereby without the need to halt the object from its rotation. Measuring Range: DT2350PA: 50~12000FPM DT2350PB: 50~40000 FPM DT2350PC: 50~20000 FPM DT2350PD: 50~30000 FPM DT2350PE: 50~2000 FPM(fit for print and textile) Display: 5 10mmLED Accuracy: +/-(0.05%n+1d) Resolution: 0.1 FPM( Less 1000 FPM) 1 FPM(Over 1000 FPM) Sampling time: 0.3second Internal/External trigger: Convert automatically Adjust: X2, ÷2 High Low measurement range: convertable At low measurement range, lighting power is high At high measurement range, lighting power is low Amplitude external trigger signer: TTL, Level changer Power Supply: AC220V, Rechargeable cells type A Power: About 50W Operating conditions: No exedent gas and intense magnet space Temperature: 0~40C Humidity: Less than 85%RH Dimension: 215x85x180mm (8.5x3.35x7.1 inch) Weight: About 1000g / 2.2lb Only suitable for AC220V power supply , not for AC110V

Manufacturer: Shimpo Brand: Shimpo Model: DT-365E

The DT-365E’s LED technology extends operation due to the low energy requirement of the light diodes compared with xenon lit stroboscopes. Proper operation is assured as concern of light failure during usage common with xenon bulbs, is eliminated. The light output (Lux) of the LED’s is far brighter than xenon powered stroboscopes with its array of 6 LED’s. The operation panel is a vibrant red LED display that is ideal for viewing in dark locations. The simple to use keypad plus rate adjustment dial aids in making quick changes of the flash rate to coincide with changes in the speed of your process. The dial allows fine-tune altering of the flash rate while the x2/÷2 keys enable large spanning over the entire flash range. The DT-365E’s have the added feature of modifying the flash duration or on time which aids in picture clarity often necessary in printing processes. The phase shift function is ideal for rotating equipment where the user needs to change the focus on different blades, gears, or section of the machinery. These stroboscopes are also capable of being synchronized with an input signal. The robust aluminum housing is NEMA-4X (IP65) protected allowing usage in harsh plant environments. The DT-365E’s array of 6 LED’s allows continuous operation from 3 to 8 hours depending on user settings. Typical applications for the DT-365E are to determine speeds, inspect rotors, meshing gears, motors, textile equipment, printing production lines, conveyors, industrial fans, pump operation, vibration equipment diagnostics and many more.

Manufacturer: Shimpo Brand: Shimpo Model: ST-5000

The ST-5000 is the first dual 2-in-1 stroboscope tachometer. This combination unit eliminates the need to purchase and carry around two separate test instruments. With the Laser Tachometer portion of the ST-5000, users can determine exact process speeds up to a distance of 5’, providing adequate safety for the operator. The tachometer mode provides the process speed as well as the maximum and minimum levels recorded. A graphing mode is selectable for viewing a plot of the process speed. The Series ST-5000 has several time-saving user features. The scroll dial provides fast adjustment of the flash rate with the rate multiplication factor which can be set up to a maximum of 10 times, allowing one to quickly scroll through the entire flash range. One key function enables operators to acquire the speed in tachometer mode and instantly transfer the recorded speed over to the stroboscope mode, reducing time to analyze and troubleshoot equipment at various speeds. By being a 2-in-1 instrument with the ability to quickly change from tachometer to stroboscope provides the user instantly the proper stopped movement speed of the process, eliminating time dialing in the exact speed normally required when using typical single function stroboscopes. Units come standard with rechargeable batteries and battery recharger.

Manufacturer: COLE-PARMER Brand: Monarch Instrument

Stroboscopes remotely measure the speed of moving machinery. You can measure RPMs from a safe distance and limit your risk. If you want to check the performance of difficult-to-reach equipment, use a stroboscope. Even better, many stroboscopes are able to slow down or freeze reciprocating or rotating machinery so you can visually inspect it. Inspections can save you time and expense by revealing when equipment is operating less efficiently. A stroboscope also can be useful for checking pump operation, propeller performance, gear movements, industrial fan speeds, oil leaks, and more. Tachometers or laser tachometers come in contact, noncontact, and dual-style formats. Those using laser beam detection enable precise RPM measurement. Some include contact adaptors for taking both contact and noncontact measurements. For hard-to-reach measurements or those in difficult areas, use a noncontact tachometer. Tachometers are microprocessor-based with limited memory capabilities. Combination meters (tachometer/stroboscopes) are also available for two-in-one meter features. These units can measure rpm and speed and conduct motion analysis. To harness the advantages of both meters-and expand your application usage-these dual-function models may be your solution. This pocket LED stroboscope is a compact, rugged, lightweight device that provides a super bright, uniform light output for performing visual diagnostic inspection and rpm measurements. The silent cool running LEDs are extremely energy efficient, providing up to five hours of operation on a single charge. Additional features include external input for remote triggering or tachometer mode, pulse output, memory for up to five preset flash rates, and tachometer mode for speed measurements up to 250,000 rpm using optional remote sensors and TTL pulse output. What's Included: Universal recharger 115 to 230 VAC, interchangeable wall plugs, NIST-traceable document provided by the manufacturer. Model PLS-Kit also inc

Manufacturer: Shimpo Brand: Shimpo Model: DT-311J-230V

The Shimpo DT-311J-230V heavy duty digital stroboscope has a xenon flash tube, a 200 to 1,500 flashes per minute (FPM) flash range, and is Ingress Protection 65 (IP65) rated for use in harsh conditions. It is designed for motion analysis, preventive maintenance, and speed measurement of repetitive motion in harsh or wet environments including textile, weaving, and printing industries. The stroboscope is used to set injection timing, injection pressure, timing of shedding and weft running time of weaving machinery. The xenon flash tube provides crisp images in brightly lit areas. Xenon flash tubes have brighter light output and a shorter flash duration than LED lights. Bright light output is required for quality images in brightly lit areas, and shorter flash durations provide sharper images, especially at high rates of speed. Internal and external trigger modes have a 200 to 1,500 FPM range and an accuracy of + or - 1 digit. An alarm indicates an out-of-range speed below 200 or above 1,500rpm. External mode features include automatic synchronization, phase shift, tachometer mode (rpm), and divide ratio selection. Divide ratios of 1/1, 1/2, 1/3, 1/4, and 2/4 enable the operator to distinguish true RPM from harmonics. Phase shift has a range of 0 to 359 degrees in one-degree increments to enable the operator to adjust the focal point of the object to any point in the rotation without moving the trigger point. The National Electrical Manufacturers Association (NEMA) 4X housing is IP65 rated against airborne particles, water, and corrosive agents. Shock-absorbing components provide protection in harsh environments. The stroboscope is 230V AC line powered and includes a 6m/19.68ft input and power cable with a connector, a rubber strobe guard with handle, and instructions. Stroboscopes are used in a variety of settings including manufacturing, printing, education, and photography.SpecificationsFlash range (internal and external)200 to 1,500 RPMAccuracy+ or - 1 digitInternal mode featuresFlash rate adjustmentExternal mo...

Manufacturer: SHIMPO Brand: Shimpo Model: ST-328-RC-1-230V

The st-328 is a permanent mount stroboscope array utilizing bright high powered Xenon Style lamps. The st-328’s Xenon light array provides a bright, stable strobe light over a wide measurement range. The st-328 arrays are available in several standard sizes from 10” (260 mm) to 71” (1800 mm) in length. Custom sizes are available upon request. The arrays are easily mountable on production equipment. An optional mounting adapter Kit is available to aid in array installation. An integral or remote control enclosure is available to program the unit. If selecting the separate, external control enclosure, communication is via a 9.8’ (3 M) connecting cable. Operation is simple with the 6 button keypad and large, LED display. Flash rate is quickly adjustable via the control dial. The unit can work off user programmed flash frequency or from a remote sensor’s signal which will automatically adjust to corresponding process fluctuations. The st-328 is designed for speed and frequency measurements in the printing, packaging, textile, automotive, cable, mining, steel, chemical, optical, medical and shipbuilding industries in various applications.

Manufacturer: Shimpo Brand: Shimpo Model: DT-315AEB

The Shimpo DT-315AEB battery-powered digital stroboscope has a xenon flash tube, internal and external trigger modes, and time and phase shift to provide stop-motion or slow-motion viewing of moving machinery. It is used for motion analysis, preventive maintenance, printing inspection, and speed measurement of repetitive motion. The xenon flash tube has a 10 to 40 microsecond flash duration for crisp images in brightly lit areas and a flash timer conserves flash tube life. Xenon flash tubes have brighter light output and a shorter flash duration than LED lights. Bright light output is required for quality images in brightly lit areas, and shorter flash durations provide sharper images, especially at high rates of speed. A high-polish focused reflector eliminates blind viewing areas. Internal and external trigger modes have a 0 to 35,000 flashes per minute (FPM) range and an accuracy of + or - 0.01%, or + or - 1 digit. Built-in multiply-by-2 and divide-by-2 functionality allows the operator to distinguish true RPM from harmonics. Internal mode phase shift has a 360 degree range in six seconds. External mode has a phase shift range of 0 to 360 degrees in one-degree increments and a time delay of 0 to 2,000 milliseconds (msec) at speeds between 40 and 10,000 FPM. Time delay and phase shift enable the operator to adjust the focal point of the object to any point in the rotation without moving the trigger point. Synchronous output enables the stroboscope to drive other strobes for wider coverage. The stroboscope can be powered by an external battery pack for extended use. The battery pack is rechargeable using the 115V AC recharger (included). An integrated mounting thread and continuous duty cycle allow long-term use without the need for cool-down periods. The aluminum housing provides durability. The stroboscope includes a flash tube removal tool, a handle, external battery pack, 115V AC battery charger/adapter, and instructions. Stroboscopes are used in a variety of settings including manufacturing, printing, educa...

Manufacturer: Monarch Instrument Brand: Monarch Instrument Model: 6220-034

The Monarch 6220-034 battery or line-powered, vbx portable vibration stroboscope has a xenon flash tube, provides measurements in flashes per minute (FPM) and hertz (Hz), and has output cables for use with the CSI Model 2130 data collector (not included) for use in applications requiring balancing, motion analysis, online coupling inspections, and general-purpose phase-shifting. The xenon flash tube has an 8 to 20 microsecond flash duration to provide crisp images in brightly lit areas. Xenon flash tubes have brighter light output and a shorter flash duration than LED lights. Bright light output is required for quality images in brightly lit areas, and shorter flash durations provide sharper images, especially at high rates of speed. The stroboscope has a flash rate range of 30 to 50,000 FPM/0.5 to 830 Hz and an accuracy of + or - 0.002% of reading. A NIST Certificate of Calibration ensures accuracy. Built-in multiply-by-2 and divide-by-2 functionality allows the operator to distinguish true RPM from harmonics. The narrow-bandwidth filter limits the influence of harmonics around the selected frequency, providing a more stable phase reading. Separate 3.5mm (1/8") transistor-transistor logic (TTL) input and output jacks transmit signals using the accelerometer cable (included) and CSI data collector interface cable (included) to a remote CSI Model 2130 data collector (data collector not included). TTL input and output jacks can also be used to provide power to remote sensors and allow multiple strobes to be daisy-chained to provide wider coverage. Tachometer mode, available for use while the stroboscope is in external mode, has a measuring range of 5 to 200,000 rpm and an accuracy of + or - 0.01% or 0.1 rpm. The phase shift range of 0.1 to 359.9 degrees and time delay range of 0.01 to 1000 milliseconds allow the operator to view the object at any point in the cycle without moving the trigger point. The stroboscope operates on internal rechargeable batteries or is line-powered using the universal 115/230V AC power s...

Manufacturer: Monarch Instrument Brand: Monarch Instrument Model: 5380-141 Color: Clear

The NEMA 4X kit consists of a heavy duty molded plastic NEMA 4X enclosure with a lockable hinged door and the SPC-1250 splash proof cover. The door of the enclosure is die cut to accept the Data Chart 1250. When using this kit, the DC1250 can be mounted outdoors or in harsh wet environments. The kit also includes stainless steel mounting feet for wall mounting. The enclosure can be easily drilled to accept conduit or water tight gland fittings for input signal and power wires.

Manufacturer: Monarch Instrument Brand: Monarch Instrument Model: 6280-072

Plastic Latching Carry Case for PLS Stroboscope